Grandstream Networks GXV3610_HD Manual

Grandstream GXV-3610HD
Admin Guide
Schmooze Com Inc.
GRANDSTREAM

Chapters
How to Find the IP Address
How to Find the MAC Address
How to Set the Configuration Server
How to Restore Factory Default
How to Find the IP Address
Quick Steps
1. With the device connected via Ethernet cable, click on the link below to download and install
the free GSurf_Pro software from the Grandstream website.
http://www.grandstream.com/products/tools/surveillance/GS_Search.zip
2. Click the “Search” button and the detected devices will appear in the Output field.
3. The IP Address for this device will display in the IP column.
© Copyright Schmooze Com, 2013
How to Find the MAC Address
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
3. Under Basic Settings on the left, click “Status”.
4. The MAC Address will display under Network Status.
How to Set the Configuration Server
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
3. Under Advanced Settings on the left, click “Maintenance”.
4. Then under Firmware Upgrade and Provisioning, define the Config server path to your PBX.
Generally this would be the IP address such as 10.10.0.1, used in our example. Press the
“Save” button at the bottom.
How to Restore Factory Default
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
3. Under Advanced Settings on the left, click “Maintenance”.
4. Then under Restore the device, press the “Restore” button.
5. The device is now reset to factory default.
Gate way
Sub net mask
New IP
Use DHCP
Old IP
Modify IP
Ping
AddSearch
IP Address Configuration Wifi Configuration
IPCAMERA 3610HD1 1.0.4.43 GXV3610HD 10.10.0.1 80 554 00:0B:82:41:68:4E
Index Model Version Device Name IP HTTP Port RTSP Port MAC

Chapters
How to Find the IP Address
How to Find the MAC Address
How to Set the Configuration Server
How to Restore Factory Default
How to Find the IP Address
Quick Steps
1. With the device connected via Ethernet cable, click on the link below to download and install
the free GSurf_Pro software from the Grandstream website.
http://www.grandstream.com/products/tools/surveillance/GS_Search.zip
2. Click the “Search” button and the detected devices will appear in the Output field.
3. The IP Address for this device will display in the IP column.
How to Find the MAC Address
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
© Copyright Schmooze Com, 2013
3. Under Basic Settings on the left, click “Status”.
4. The MAC Address will display under Network Status.
How to Set the Configuration Server
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
3. Under Advanced Settings on the left, click “Maintenance”.
4. Then under Firmware Upgrade and Provisioning, define the Config server path to your PBX.
Generally this would be the IP address such as 10.10.0.1, used in our example. Press the
“Save” button at the bottom.
How to Restore Factory Default
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
3. Under Advanced Settings on the left, click “Maintenance”.
4. Then under Restore the device, press the “Restore” button.
5. The device is now reset to factory default.
The server http://10.10.0.1 requires a username and
password.
User Name:
Password:
Cancel Log In
admin
•••••
Gate way
Sub net mask
New IP
Use DHCP
Old IP
Modify IP
Ping
AddSearch
IP Address Configuration Wifi Configuration
IPCAMERA 3610HD1 1.0.4.43 GXV3610HD 10.10.0.1 80 554 00:0B:82:41:68:4E
Index Model Version Device Name IP HTTP Port RTSP Port MAC

Chapters
How to Find the IP Address
How to Find the MAC Address
How to Set the Configuration Server
How to Restore Factory Default
How to Find the IP Address
Quick Steps
1. With the device connected via Ethernet cable, click on the link below to download and install
the free GSurf_Pro software from the Grandstream website.
http://www.grandstream.com/products/tools/surveillance/GS_Search.zip
2. Click the “Search” button and the detected devices will appear in the Output field.
3. The IP Address for this device will display in the IP column.
How to Find the MAC Address
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
3. Under Basic Settings on the left, click “Status”.
4. The MAC Address will display under Network Status.
© Copyright Schmooze Com, 2013
How to Set the Configuration Server
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
3. Under Advanced Settings on the left, click “Maintenance”.
4. Then under Firmware Upgrade and Provisioning, define the Config server path to your PBX.
Generally this would be the IP address such as 10.10.0.1, used in our example. Press the
“Save” button at the bottom.
How to Restore Factory Default
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
3. Under Advanced Settings on the left, click “Maintenance”.
4. Then under Restore the device, press the “Restore” button.
5. The device is now reset to factory default.
GXV3610HD Administration Interface
Product Model:
Hardware Version:
Part Number:
Bootloader Version:
Core Version:
Base Version:
Firmware Version:
System Up Time Since:
MAC Address:
LAN IP Address:
LAN Subnet Mask:
LAN Default Gateway:
PPPoE IP Address:
PPPoE Status:
DDNS Status:
Wifi Status:
SIP Registered:
Camera Type:
GXV3610HD
V0.4B
9670000904B
1.0.0.0
1.0.4.2
1.0.4.38
1.0.4.38
3 hours 31 minutes
00:0B:82:41:68:4E
10.4.0.159
255.255.255.0
10.4.0.254
0.0.0.0
Disconnected
Disabled
Disconnected
Offline
Aptina, MT9D131 Pixels 1600*1200
System Statistics
Network Status
Camera Type
System
Video & Audio
Networking
Wifi
DDNS
SIP
Advanced Settings
Basic Settings
Home
Status
Product Model:
Hardware Version:
Part Number:
Bootloader Version:
Core Version:
Base Version:
Firmware Version:
System Up Time Since:
MAC Address:
LAN IP Address:
LAN Subnet Mask:
LAN Default Gateway:
PPPoE IP Address:
PPPoE Status:
DDNS Status:
Wifi Status:
SIP Registered:
Camera Type:
GXV3601HD
V0.4B
9670000904B
1.0.0.0
1.0.4.2
1.0.4.38
1.0.4.38
3 hours 31 minutes
00:0B:82:41:68:4E
10.4.0.159
255.255.255.0
10.4.0.254
0.0.0.0
Disconnected
Disabled
Disconnected
Offline
Aptina, MT9D131 Pixels 1600*1200
System Statistics
Network Status
Camera Type
System
Video & Audio
Networking
Wifi
DDNS
SIP
Advanced Settings
Basic Settings
Home
Status

Chapters
How to Find the IP Address
How to Find the MAC Address
How to Set the Configuration Server
How to Restore Factory Default
How to Find the IP Address
Quick Steps
1. With the device connected via Ethernet cable, click on the link below to download and install
the free GSurf_Pro software from the Grandstream website.
http://www.grandstream.com/products/tools/surveillance/GS_Search.zip
2. Click the “Search” button and the detected devices will appear in the Output field.
3. The IP Address for this device will display in the IP column.
How to Find the MAC Address
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
3. Under Basic Settings on the left, click “Status”.
4. The MAC Address will display under Network Status.
How to Set the Configuration Server
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
© Copyright Schmooze Com, 2013
3. Under Advanced Settings on the left, click “Maintenance”.
4. Then under Firmware Upgrade and Provisioning, define the Config server path to your PBX.
Generally this would be the IP address such as 10.10.0.1, used in our example. Press the
“Save” button at the bottom.
How to Restore Factory Default
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
3. Under Advanced Settings on the left, click “Maintenance”.
4. Then under Restore the device, press the “Restore” button.
5. The device is now reset to factory default.
Gate way
Sub net mask
New IP
Use DHCP
Old IP
Modify IP
Ping
AddSearch
IP Address Configuration Wifi Configuration
IPCAMERA 3610HD1 1.0.4.43 GXV3610HD 10.10.0.1 80 554 00:0B:82:41:68:4E
Index Model Version Device Name IP HTTP Port RTSP Port MAC
The server http://10.10.0.1 requires a username and
password.
User Name:
Password:
Cancel Log In
admin
•••••

GXV3610HD Administration Interface
User Management
SMTP
FTP
PTZ
Alarm Server
Advanced Settings
Basic Settings
Home
Maintenance
Alarm Event
Motion Detection
Syslog
Record
Live Storage
Restart
Restore
Save
Restart the device.
Reset settings, except IP address, to factory default.
Upgrade via:
Firmware Server Path:
Config Server Path:
XML Config File Password:
Automatic Upgrade Interval(Minutes):
Automatic Upgrade:
10.10.0.1/grandstream/2
10.10.0.1
1080
TFTP
Restart the device
Restore the device
Firmware Upgrade and Provisioning
Chapters
How to Find the IP Address
How to Find the MAC Address
How to Set the Configuration Server
How to Restore Factory Default
How to Find the IP Address
Quick Steps
1. With the device connected via Ethernet cable, click on the link below to download and install
the free GSurf_Pro software from the Grandstream website.
http://www.grandstream.com/products/tools/surveillance/GS_Search.zip
2. Click the “Search” button and the detected devices will appear in the Output field.
3. The IP Address for this device will display in the IP column.
How to Find the MAC Address
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
3. Under Basic Settings on the left, click “Status”.
4. The MAC Address will display under Network Status.
How to Set the Configuration Server
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
3. Under Advanced Settings on the left, click “Maintenance”.
4. Then under Firmware Upgrade and Provisioning, define the Config server path to your PBX.
Generally this would be the IP address such as 10.10.0.1, used in our example. Press the
“Save” button at the bottom.
© Copyright Schmooze Com, 2013
How to Restore Factory Default
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
3. Under Advanced Settings on the left, click “Maintenance”.
4. Then under Restore the device, press the “Restore” button.
5. The device is now reset to factory default.
GXV3601HD Administration Interface
User Management
SMTP
FTP
PTZ
Alarm Server
Advanced Settings
Basic Settings
Home
Maintenance
Alarm Event
Motion Detection
Syslog
Record
Live Storage
Restart
Restore
Save
Restart the device.
Reset settings, except IP address, to factory default.
Upgrade via:
Firmware Server Path:
Config Server Path:
XML Config File Password:
Automatic Upgrade Interval(Minutes):
Automatic Upgrade:
10.10.0.1/grandstream/2
10.10.0.1
1080
TFTP
Restart the device
Restore the device
Firmware Upgrade and Provisioning

Chapters
How to Find the IP Address
How to Find the MAC Address
How to Set the Configuration Server
How to Restore Factory Default
How to Find the IP Address
Quick Steps
1. With the device connected via Ethernet cable, click on the link below to download and install
the free GSurf_Pro software from the Grandstream website.
http://www.grandstream.com/products/tools/surveillance/GS_Search.zip
2. Click the “Search” button and the detected devices will appear in the Output field.
3. The IP Address for this device will display in the IP column.
How to Find the MAC Address
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
3. Under Basic Settings on the left, click “Status”.
4. The MAC Address will display under Network Status.
How to Set the Configuration Server
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
3. Under Advanced Settings on the left, click “Maintenance”.
4. Then under Firmware Upgrade and Provisioning, define the Config server path to your PBX.
Generally this would be the IP address such as 10.10.0.1, used in our example. Press the
“Save” button at the bottom.
How to Restore Factory Default
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
© Copyright Schmooze Com, 2013
3. Under Advanced Settings on the left, click “Maintenance”.
4. Then under Restore the device, press the “Restore” button.
5. The device is now reset to factory default.
Gate way
Sub net mask
New IP
Use DHCP
Old IP
Modify IP
Ping
AddSearch
IP Address Configuration Wifi Configuration
IPCAMERA 3610HD1 1.0.4.43 GXV3610HD 10.10.0.1 80 554 00:0B:82:41:68:4E
Index Model Version Device Name IP HTTP Port RTSP Port MAC
The server http://10.10.0.1 requires a username and
password.
User Name:
Password:
Cancel Log In
admin
•••••

GXV3610HD Administration Interface
User Management
SMTP
FTP
PTZ
Alarm Server
Advanced Settings
Basic Settings
Home
Maintenance
Alarm Event
Motion Detection
Syslog
Record
Live Storage
Restart
Restore
Save
Restart the device.
Reset settings, except IP address, to factory default.
Upgrade via:
Firmware Server Path:
Config Server Path:
XML Config File Password:
Automatic Upgrade Interval(Minutes):
Automatic Upgrade:
10.10.0.1/grandstream/2
10.10.0.1
1080
TFTP
Restart the device
Restore the device
Firmware Upgrade and Provisioning
Chapters
How to Find the IP Address
How to Find the MAC Address
How to Set the Configuration Server
How to Restore Factory Default
How to Find the IP Address
Quick Steps
1. With the device connected via Ethernet cable, click on the link below to download and install
the free GSurf_Pro software from the Grandstream website.
http://www.grandstream.com/products/tools/surveillance/GS_Search.zip
2. Click the “Search” button and the detected devices will appear in the Output field.
3. The IP Address for this device will display in the IP column.
How to Find the MAC Address
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
3. Under Basic Settings on the left, click “Status”.
4. The MAC Address will display under Network Status.
How to Set the Configuration Server
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
3. Under Advanced Settings on the left, click “Maintenance”.
4. Then under Firmware Upgrade and Provisioning, define the Config server path to your PBX.
Generally this would be the IP address such as 10.10.0.1, used in our example. Press the
“Save” button at the bottom.
How to Restore Factory Default
Quick Steps
1. Once the device is detected using the GSurf_Pro software, double click the device. Your
browser will automatically open and link to the device IP and the web configuration page.
2. From the home page, click on “Configuration” at the bottom left. The default username is
“admin” and the default password is “admin”.
3. Under Advanced Settings on the left, click “Maintenance”.
4. Then under Restore the device, press the “Restore” button.
5. The device is now reset to factory default.
© Copyright Schmooze Com, 2013
GXV3601HD Administration Interface
User Management
SMTP
FTP
PTZ
Alarm Server
Advanced Settings
Basic Settings
Home
Maintenance
Alarm Event
Motion Detection
Syslog
Record
Live Storage
Restart
Restore
Save
Restart the device.
Reset settings, except IP address, to factory default.
Upgrade via:
Firmware Server Path:
Config Server Path:
XML Config File Password:
Automatic Upgrade Interval(Minutes):
Automatic Upgrade:
10.10.0.1/grandstream/2
10.10.0.1
1080
TFTP
Restart the device
Restore the device
Firmware Upgrade and Provisioning

Schmooze Com Inc.
http://schmoozecom.com
[phone]