Grandstream Networks Budge tone 100 User manual

!
1!
GRANDSTREAM BUDGE TONE 100
Thank you for purchasing Budge Tone 100.
Package Contents:
•Budge Tone 100 Body
•Handset
•5V Power Adapter
•Ethernet Cable
•Phone Cord
•User’s Manual
Disclaimer
•Product functions and specifications are subject to change without prior notice.
•Quality of call (e.g. choppy line, noise, etc.) may be affected by company’s network
environment.
•Our company does not assume any responsibilities for a difference in call quality due
to personal hearing impairment.
•Our company is not responsible for service that may not be available outside the
country.
•BudgeTone – 100 may temporarily suspend the service for routine maintenance
without prior notice.
•We would not assume any liability for product failure due to device (phone)
malfunction.
Precautions
Warning: Please DO NOT attempt to use a different power adaptor. Using other power
adaptor may damage the BudgeTone – 100 IP telephone and will void the manufacturer
warranty.
Warning: Changes or modifications to this product not expressly approved by Grandstream,
or operation of this product in any way other than as detailed by this User Manual, could
void your manufacturer warranty.

!
2!
Installation
1. Connect the handset and cord then, connect it to the main body.
2. Connect phone to the router using Ethernet cable.
3. Connect AC power cord to the phone and plug to a power supply. This will boot the
phone, which may take a few minutes.
BudgeTone – 100 VoIP phone uses Agile Phone biz Pro services. This phone requires an
Internet service provider or broadband modem.
1. Main Screen
2. Menu Arrow
3. Callers
4. Speaker
13. Send
5. Menu
6. Called
7. Message
8. Hold
9. Transfer
10. Conference
11. Flash
12. Mute/Del
BudgeTone – 100 Parts & Functions
1. Main Screen: Displays phone settings and functions.
2. Menu Arrow [↓↑]: Used to navigate.
3. Callers: After off hook, press [Callers] to display the incoming Caller IDs. When number is
displayed, press [Send] to make a call using the displayed number.
4. Speakerphone: Activate hands-free mode.
5. Menu: Displays phone options and features.
6. Called: After off hook, press [Called] to display dialed numbers. When number is displayed,
press [Send] to make a call using the displayed number.
7. Message: Retrieves voicemail portal or service.
8. Hold: Temporarily holds an active call.
9. Transfer: Transfers an active call to another party.
10. Conference: Enables a 3-way call.
11. Flash: Press [Flash] to switch between two lines.
12. Mute/Del: Mutes an active call; or deletes key entry, call log, etc.
13. Send/ (Re) dial: Redials the last number dialed. After entering a phone number, press [Send]
to disconnect a call.

!
3!
Setting up
* Ensure that the phone is powered-up and connected to the Internet.
1. Verify the device’s IP address.
Press [Menu] !Use the [Down Arrow] button to navigate and select option [(2) IP Addr]
!Press [Menu] again to view IP address.
2. Open Settings Page on Web Browser.
BudgeTone – 100 and PC’s network connection should be the same. Type the IP address
on the Web browser field on a local PC. [Format: http://IPAddress !Example: Phone IP
address (192.168.001.002) !Type (http://192.168.1.2)]
4. Enter password and click [Login]. Default password: [admin].
5. Register your purchased [SIP Server] and [Outbound Proxy]. Enter Unique ID on
[SIP User ID], [Authenticate ID] and [Name] fields.

!
4!
6. NAT Traversal: Select [Yes].
STUN Server (Optional)
7. Voicemail User ID: 999, if
available, subscribe for MWI:
Select [Yes]
DTMF: RTP (RFC2833)
8. NTP Server: Enter
[ntp.jst.mfeed.ad.jp].
9. Click [Update] to save
changes.
* Once done, click [Reboot] to
reset and save current
configurations.

!
5!
Status Page
Basic Settings Page

!
6!
Precautions & Safety Instructions
The following instructions help use Grandstream BudgeTone – 100
properly and prevent accidents. Failure to follow these instructions would
void the product’s warranty and accident may happen.
•Immediately unplug the device from the power supply if there is a strange
smell and smoke. Don’t use the device and immediately contact the dealer
for repair. Do not disassemble or modify. The device may malfunction,
cause electric shock and fire.
•Do not insert metal and keep the device dry. The device may malfunction,
cause electric shock and fire.
•Do not touch the device when lightning occurs. Doing so may cause an
electrical shock. Don’t place near a flammable material. This may cause
fire or explosion.
•Holding the phone on wet hands may cause electric shock. Don’t place the
device in an extreme hot or cold place. Sudden temperature change may
cause malfunction of the device.
•Do not place in a damp, dusty or direct sunlight. This may trigger an
explosion of the device. Place in an even and stable location.
•Do not place the phone and earpiece near an absorbent and magnet
material. This may cause malfunction.
Troubleshooting
Please check the troubleshooting procedure before requesting a repair. If the
problem doesn’t get resolved, please contact us. Agile Shop ([email protected])
Initialization Method
Clear all data initialization process. You must set all the required information to
start initializing your service again.
1. Note the (000B82000xxxx) MAC address located at the bottom of the unit.
2. Press the [MENU] button and select [Config]. Then, select [Factory Reset]
and confirm by selecting [OK].

!
7!
PROBLEM
CAUSE
SOLUTION
General Failure
Plug and unplug from the power source. (Do this a few times).
Wait at least one minute before you again plug the device to
the power source.
If the problem is not resolved after doing this, contact us at:
[e-mail]
Please provide your number and broadband products.
No ringer sound
Ethernet cable is
disconnected.
AC adapter is
disconnected.
Did you change
the volume
settings?
Did you change the settings
on the display?
Check the connection of the
Ethernet cable.
Check the connection of the
AC adapter.
Adjust the volume on the
volume button.
Revert the changed settings.
Disconnect the Ethernet cable
(Please reboot).
Call is interrupted
by noise
Are there any abnormalities in
the network environment?
Check your network
environment.
Reference: http://www.scribd.com/doc/22746021/User-Manual-BudgeTone-100-Series-IP-Phone
Please check our website for FAQ.
For more information on features
and settings, please check
http://www.agile.ne.jp/support /
Inquiries by telephone and email:
Send to: [e-mail]
Telephone number: 03-6365-1506
Weekdays: 10:00 - 19:00
For Inquiries upon product purchase:
Send to: [e-mail]