Grandstream Networks GXP1450 Manual

Grandstream GXP
Admin Guide
Schmooze Com Inc.
GXP 110X, 1200, 140X, 1450, 2000, 2100, 2110, 2120 & 28X
MENU
2
ABC
GRANDSTREAM
GXP285
11:22am
Friday, 3 February
NewCall
Recall
MUTE
HD
MESSAGE
TRANSFER
CONF
FLASH
1
4
GHI
7
PQRS
HOLD
#
9
WXYZ
SEND
6
MNO
5
JKL
8
TUV
0
OPER
3
DEF

Chapters
Find the IP Address and MAC Address
Set the Configuration Server
Reset to Factory Defaults
Find the IP Address and MAC Address
Quick Steps
1. Select the “Menu” button.
2. Select Status.
3. Scroll down until you see the IP address or Mac address.
© Copyright Schmooze Com, 2012
Set the Configuration Server
Quick Steps
1. Find the IP address of the phone and open a web browser to the IP address.
2. Login with the phone admin password. Default factory password is admin
3. Click on the “Advanced Settings” option at the top.
4. Define the Config server path to your PBX. Generally this would be the IP address such as
10.10.0.1, used in our example. Press the “Save” button at the bottom.
Reset to Factory Defaults
Quick Steps
1.Press the Menu button.
2.Scroll down to Config and select it by pressing the Menu button
3.Select down to Factory Reset and select it by pressing the Menu button.
4.You will now need to enter the MAC address of the phone. It can be found on a label on the
bottom of the phone.
5.Press OK, the phone will now reboot and perform a factory reset.
GRANDSTREAM
GXP285
Call History
Status
Phone Book
GRANDSTREAM
GXP285
IP:10.10.0.241
Account 1: YES
Boot:1.X.X.XX

Chapters
Find the IP Address and MAC Address
Set the Configuration Server
Reset to Factory Defaults
Find the IP Address and MAC Address
Quick Steps
1. Select the “Menu” button.
2. Select Status.
3. Scroll down until you see the IP address or Mac address.
Set the Configuration Server
Quick Steps
1. Find the IP address of the phone and open a web browser to the IP address.
2. Login with the phone admin password. Default factory password is admin
3. Click on the “Advanced Settings” option at the top.
4. Define the Config server path to your PBX. Generally this would be the IP address such as
10.10.0.1, used in our example. Press the “Save” button at the bottom.
© Copyright Schmooze Com, 2012
Reset to Factory Defaults
Quick Steps
1.Press the Menu button.
2.Scroll down to Config and select it by pressing the Menu button
3.Select down to Factory Reset and select it by pressing the Menu button.
4.You will now need to enter the MAC address of the phone. It can be found on a label on the
bottom of the phone.
5.Press OK, the phone will now reboot and perform a factory reset.
Grandstream Device Conguration
Password
Login
All Rights Reserved Grandstream Networks, Inc. 2006-2011
Grandstream Device Conguration
All Rights Reserved Grandstream Networks, Inc. 2006-2011
STATUS BASIC SETTINGS ADVANCED SETTINGS PROFILE 1 PROFILE 2 FXS PORTS
MAC Address: WAN-- 00:00:00:00:00:00 LAN-- 00:00:00:00:00:00 ( Device MAC)
WAN IP Address: 10.10.0.241
Product Model: HT-502 V1.2A
Software Version: Program -- 1.0.7.6 Bootloader -- 1.0.0.15 Core -- 1.0.7.1 Base -- 1.0.7.6
CPE -- 1.0.1.19
System Up Time: 09:06:40 up 7 days
PPPoE Link Up: Disabled
NAT:
Port Status: Port Hook Registration DND Forward Busy Forward Delayed Forward
FXS 1 On Hook Registered No
FXS 2 On Hook Registered No
Grandstream Device Conguration
STATUS BASIC SETTINGS ADVANCED SETTINGS PROFILE 1 PROFILE 2 FXS PORTS
Admin Password: (purposely not displayed for security protection)
Layer 3 QoS:
12
(Diff-Serv or Precedence value)
Layer 2 QoS: 802.1Q/VLAN Tag
0
802.1p priority value
0
(0-7)
802.1p priority value (NATed traffic)
0
(0-7)
STUN server is : (URI or IP:port)
Keep-alive Interval:
20
(in seconds, default 20 seconds)
Use STUN to detect network connectivity:
No
Yes, total STUN response misses
3
to restart DHCP (mininum=3)
Firmware Upgrade and Provisioning: Upgrade Via TFTP HTTP HTTPS
Firmware Server Path:
10.10.0.1/grandstream/2
Config Server Path:
10.10.0.1/

Chapters
Find the IP Address and MAC Address
Set the Configuration Server
Reset to Factory Defaults
Find the IP Address and MAC Address
Quick Steps
1. Select the “Menu” button.
2. Select Status.
3. Scroll down until you see the IP address or Mac address.
Set the Configuration Server
Quick Steps
1. Find the IP address of the phone and open a web browser to the IP address.
2. Login with the phone admin password. Default factory password is admin
3. Click on the “Advanced Settings” option at the top.
4. Define the Config server path to your PBX. Generally this would be the IP address such as
10.10.0.1, used in our example. Press the “Save” button at the bottom.
Reset to Factory Defaults
Quick Steps
1.Press the Menu button.
2.Scroll down to Config and select it by pressing the Menu button
3.Select down to Factory Reset and select it by pressing the Menu button.
4.You will now need to enter the MAC address of the phone. It can be found on a label on the
bottom of the phone.
5.Press OK, the phone will now reboot and perform a factory reset.
© Copyright Schmooze Com, 2012
GRANDSTREAM
GXP285
Preference
Config
Factory Functions
GRANDSTREAM
GXP285
SIP
Upgrade
Factory Reset
GRANDSTREAM
GXP285
Factory Reset
OK
CANCEL

Schmooze Com Inc.
http://schmoozecom.com
[phone]