Granit BE 300 User manual

Operating Instructions
Multifunctional LED work light BE 300
11011198
These operating instructions must be read thoroughly before use and followed carefully.
Please retain these operating instructions for future reference.
Translation of the original operating instructions.

Operating Instructions
11011198
Page 2
Table of contents
1. About these operating instructions and symbol description.......................................
2. Safety and accident prevention regulations................................................................
2.1 General safety instructions....................................................................................
3. Performance specifi cation...........................................................................................
3.1 Technical data.......................................................................................................
4. Operation and charging instruction............................................................................
4.1 Operating instructions..........................................................................................
4.2 Charging instructions............................................................................................
5. Safety instructions......................................................................................................
6. EU Declaration of Conformity......................................................................................
7. UKCA Declaration of Conformity.................................................................................
8. Disposal......................................................................................................................
9. Warranty....................................................................................................................
10. Addresses..................................................................................................................
11. Legal notice...............................................................................................................
3
3
3
4
4
5
5
5
6
7
8
9
10
10
10

1. About these operating instructions and symbol descriptions
Incorrect operation may lead to serious injury or death.
Incorrect operation or negligence may result in personal injury,
cause damage to the device or incorrect measurement results.
Advice and tips for operation.
• Numbers in the fi gures (1, 2, 3 ...) refer to the corresponding numbers in
brackets (1), (2), (3) ... in the text next to the item numbers in the tables.
• Instructions, for which the order must be followed, are numbered (1, 2, 3, ...).
• Lists are marked with bullet points (•, •, ...).
2. Safety and accident prevention regulations
• Do not open the device.
• Do not look directly into the light - risk of eye injury!
• Do not operate in direct sunlight or in extreme temperatures.
• The working temperature is between -10°C and +40°C
• Keep away from children! Do not let children play with the device.
Use only under supervision.
Operating Instructions
11011198
Page 3
WARNING
CAUTION
CAUTION
ADVICE

Operating Instructions
11011198
Page 4
3. Performance specifi cations
3.1 Technical specifi cations
High power SMD LED
High-power mode: 300 lm (±5%)
ECO mode: 100 lm (±5%)
High-power mode: 3.0 hours (±20min)
ECO mode: 8.0 hours (±1.0 hour)
Li-po 3.7 V, 1500 mAh, 5.55 Wh
4.0 hours (±30min)
DC 5V 1A
IP 54, IK 07
-10°C to +40°C
Light source
Lighting power
Use period
Battery Specification
Charging time
Charging input
Protection class
Operating temperature

Operating Instructions
11011198
Page 5
4. Operating and charging instructions
4.1 Operating instructions:
• Switch on the lamp by pressing the switch once.
• By pressing the switch a second time, the light switches to ECO mode.
• Press the switch a third time to switch the light off.
4.2 Charging instructions:
• Switch the lamp off during the charging process.
• During the charging process, the display LED lights up red.
• As soon as the charging process is complete, the green LED lights up
• Always use the manufacturer's approved charger to
charge the lamp. The use of an UNAUTHORISED
charger can cause a fi re and destroy the lamp.
• Charge the lamp for 4-5 hours before using it for the fi rst time.
• Fully charge the lamp before storing it for a long
period of time.
• Only use the lamp's charging function if it is being
constantly monitored. Unnoticed short-circuits lead to fi res with serious
personal injury and damage to property.
CAUTION
ADVICE
CAUTION

Operating Instructions
11011198
Page 6
5. Safety instructions
• Do not use the device if there is damage to the housing, plug or cable.
If this is the case, contact your authorised specialist!
• Do not open the device!
• Repairs or replacement of the battery should only be
carried out by a trained specialist.
• Only clean the device once the main plug has been disconnected from
the power supply.
• There is a risk that damage caused by dropping the device could lead to the
battery overheating and self-igniting.
• There is a risk of a short-circuit. Repairs to the device should only
be carried out by a trained specialist.
In this case, contact your nearest approved dealer.
• Protect the battery against heat, continuous and intensive exposure to the sun,
fi re, water and moisture. Risk of explosion!
• If the battery is damaged or not used correctly, liquids can leak out of
the battery. Avoid touching any liquids. Leaking battery liquids can cause
skin irritation or burns. Rinse your skin off with water if you should come
into contact with battery liquids. Should the battery liquid enter your eye,
it is essential that you seek medical advice.
• There is a risk that damage caused by dropping the device could lead
to the battery overheating and self-igniting.
• The lamp must not be placed on the light surface while in operation.
WARNING
WARNING

Operating Instructions
11011198
Page 7
6. EU Declaration of Conformity
The manufacturer,
Wilhelm Fricke SE
Zum Kreuzkamp 7
DE-27404 Heeslingen
hereby declares its sole responsibility that the multifunctional LED work light
type/series identifi cation: 11011198
conforms to the provisions of the
2014/30/EU Electromagnetic Compatibility Directive (EMC Directive)
2011/65/EU Restriction of the Use of Certain Hazardous Substances in
Electronic and Electrical Equipment (RoHS) ((EU) 2015/863).
The product has been developed in accordance with the following standards:
EN 61547:2009
Authorised documentation representative:
Mr Eike Viebrock
Wilhelm Fricke SE
Zum Kreuzkamp 7
DE-27404 Heeslingen
Heeslingen, 25/03/2022
Translation of the original Conformity Declaration
Holger Wachholtz, Executive Board
Holger Wachholtz, Executive Board

Operating Instructions
11011198
Page 8
Holger Wachholtz, Executive Board
7. UKCA Declaration of Conformity
The manufacturer,
Wilhelm Fricke SE
Zum Kreuzkamp 7
DE-27404 Heeslingen
declares under their sole responsibility that the multifunctional LED work light
Type/series identifi cation: 11011198
conforms to the provisions of
Electromagnetic Compatibility Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012
The product was developed in accordance with the following standards:
BS EN 61547:2009
Authorised person for documentation:
Mr. Eike Viebrock
Wilhelm Fricke SE
Zum Kreuzkamp 7
DE-27404 Heeslingen
Heeslingen, 25/03/2022
Original UKCA Declaration of Conformity
Holger Wachholtz, Executive Board

Operating Instructions
11011198
Page 9
8. Disposal
If a product is marked with the symbol of a dustbin with a cross through it, this indi-
cates that the product must not be disposed of with the household waste. In the case of
batteries or rechargeable batteries containing mercury (Hg), cadmium (Cd) or lead (Pb),
the chemical symbol is shown under the crossed-out dustbin symbol. The end user has
an obligation to return the batteries or rechargeable batteries. These can be returned
free of charge to the retailer or handed in at any collection point. Electronic devices
and rechargeable batteries should be handed in separately from each other. Make sure
that the batteries or rechargeable batteries are in a discharged state or protected from
short-circuiting, if applicable. When purchasing products, try to ensure that the products
have a long service life to minimise the amount of waste produced. If your electric or
electronic device contains personal data, you are responsible for erasing it.
Because of the substances they contain, improper disposal of batteries or rechargeable
batteries can harm the environment and human health. Special care should be taken
when handling batteries containing lithium. Products should be checked to see if they
can be re-used, for example by being repaired, before you dispose of them.
!!! Always observe local waste disposal regulations!!!

Operating Instructions
11011198
Page 10
8. Warranty
The warranty conditions of Wilhelm Fricke SE apply; these can be found in the sales
documents and the current version of the General Terms and Conditions.
In case of questions, please contact the company’s customer service department.
10. Addresses
Sales / Customer Service Department: Tel: [phone]
Spare parts sales: Fax: [phone]
Postal and delivery address: Wilhelm Fricke SE
Zum Kreuzkamp 7
DE-27404 Heeslingen
11. Legal notice
Translation of the original operating instructions for the multifunctional LED work light
Manufacturer: Wilhelm Fricke SE - DE-27404 Heeslingen
1st edition february 2022
©2022 Wilhelm Fricke SE
Reproduction in whole or in part is prohibited without the written consent of the company
Wilhelm Fricke SE.
All product names mentioned in these operating instructions are trademarks
of their respective companies.
Printed on paper made from chlorine- and acid-free bleached pulp.