GRASS VALLEY K2 SOLO - User manual

Copyright © Grass Valley, Inc. All rights reserved. Printed in the United States of America. Portions of software © 2000 – 2010, Microsoft Corporation.All rights reserved. This
document may not be copied in whole or in part, or otherwise reproduced except as specifically permitted under U.S. copyright law, without the prior written consent of Grass
Valley, Inc., P.O. Box 59900, Nevada City, California 95959-7900. This product may be covered by one or more U.S. and foreign patents.
Product options and specifications subject to change without notice. The information in this manual is furnished for informational use only, is subject to changewithout notice,
and should not be construed as a commitment by Grass Valley, Inc. Grass Valley, Inc. assumes no responsibility or liability for any errors or inaccuracies that may appear in
this publication.
Grass Valley, K2, Aurora, Summit, Dyno, Solo, Infinity, Turbo, Profile, Profile XP, NetCentral, NewsBrowse, NewsEdit, NewsQ, NewsShare, NewsQ Pro, and Media Manager
are either registered trademarks or trademarks of Grass Valley, Inc. in the United States and/or other countries. Grass Valley, Inc. products are covered by U.S. and foreign
patents, issued and pending. Additional information regarding Grass Valley, Inc. trademarks and other proprietary rights may be found at www.grassvalley.com. Other
trademarks and logos used in this document are either registered trademarks or trademarks of the manufacturers or vendors of the associated products, such as Microsoft®
Windows® operating system, Windows Media® player, Internet Explorer® internet browser, and SQL Server™. QuickTime and the QuickTime logo are trademarks or
registered trademarks of Apple Computer, Inc., used under license therefrom.
K2 Solo Media Server
Accessories Installation Instructions
Table of Contents
Grass Valley Product Support................................................................................2
About this document................................................................................................5
Safety Summaries....................................................................................................5
Installing the Handipak handle...............................................................................5
Installing the Handipak feet....................................................................................6
Rack mounting ........................................................................................................7
071-8711-01

2K2 Solo Media Server Accessories Installation Instructions 29 April 2010
Grass Valley Product Support
Grass Valley Product Support
To get technical assistance, check onthe status ofa question, or to report a new issues,
contact Grass Valley Product Support via e-mail, the Web, or by phone or fax.
Web Technical Support
To accesssupport information on the Web, visit theproduct support Web page on the
Grass Valley Web site. You can download software or find solutions to problems.
World Wide Web:http://www.grassvalley.com/support/
Technical Support E-mail Address:[e-mail]
Telephone Support
Use the following information to contact Product Support by phone.
International Support Centers
Our international support centers are available 24 hours a day, 7 days a week.
Authorized Local Support Representative
A local support representative may be available in your country. To locate a support
center during normal local business hours, refer to the following list. This list is
regularly updated on the website for Grass Valley Product Support
(http://www.grassvalley.com/support/contact/phone/)
After–hours local phone support is also available for warranty and contract
customers.
Support Center Toll free In country
France [phone] [phone]
United States [phone] [phone]
Region County Telephone
Asia China [phone]
Hong Kong, Taiwan, Korea,
Macau [phone]
Japan [phone]
Southeast Asia - Malaysia [phone]
Southeast Asia - Singapore [phone]
India [phone]

29 April 2010 K2 Solo Media Server Accessories Installation Instructions 3
Telephone Support
Pacific Australia 1 300 721 495
New Zealand 0800 846 676
For callers outside Australia or
New Zealand [phone]
Central America, South America All [phone]
North America North America, Mexico,
Caribbean [phone]; [phone]
Europe UK, Ireland, Israel [phone]
Benelux – Netherlands [phone]
Benelux – Belgium [phone]
France [phone];
[phone]
Germany, Austria,
Eastern Europe [phone]
Belarus, Russia, Tadzhikistan,
Ukraine, Uzbekistan [phone];
[phone]
Nordics (Norway, Sweden,
Finland, Denmark, Iceland) [phone]; [phone]
Southern Europe – Italy Rome: [phone] ; +39
06 8720 35 42. Milan: +39 02 48
41 46 58
Southern Europe – Spain [phone]
Switzerland [phone]
Middle East, Near East, Africa Middle East [phone]
Near East and Africa [phone];
[phone]
Region County Telephone

4K2 Solo Media Server Accessories Installation Instructions 29 April 2010
Grass Valley Product Support
Waste Electrical and Electronic Equipment Directive

29 April 2010 K2 Solo Media Server Accessories Installation Instructions 5
About this document
About this document
Use these instructions to install or otherwise prepare accessories for your K2 Solo
Media Server. Refer to the section in this document that applies to the accessory kit
that you received.
Safety Summaries
WARNING: In order to avoid personal injury and prevent damage to
this product and its peripheral products, be sure to review all safety and
ESD precautions listed in the K2 Solo Media Server Service Manual.
Installing the Handipak handle
This section provides instructions for the following field kit.
Tools and materials needed:
• Torx tool with T15 magnetic tip
1. Power off the K2 Solo Media Server.
2. Install as shown.
!
Upgrade Nomenclature Description
K2-SOLO-HANDIPAK Handle and feet/protector kit. Includes the following:
1) Handle
2) Handle shims
4) Feet
8) Screws
Position handle and shims
and install with 4 screws
2
Remove screws,
if present, from holes
required for handle
attachment
1

6K2 Solo Media Server Accessories Installation Instructions 29 April 2010
Installing the Handipak feet
Installing the Handipak feet
This section provides instructions for the following field kit.
Tools and materials needed:
• Torx tool with T15 magnetic tip
1. Power off the K2 Solo Media Server.
2. Install as shown.
Upgrade Nomenclature Description
K2-SOLO-HANDIPAK Handle and feet/protector kit
Position feet and attach
with 1 screw for each foot
Remove side screws at rear of unit
from holes required for attaching feet
1
2

29 April 2010 K2 Solo Media Server Accessories Installation Instructions 7
Rack mounting
Rack mounting
This section provides instructions for the following field kit.
Tools and materials needed:
• Torx tool with T15 magnetic tip
1. Couple two K2 Solo Media Servers or one K2 Solo Media Server and one blank
rack adapter as shown.
Upgrade Nomenclature Description
K2-SOLO-RACK Dual Rack Adapter for side by side mounting in standard
equipment rack
Attach side bracket
to left-hand unit
1
Orient bracket with
double flange on top,
single flange on bottom right
2

8K2 Solo Media Server Accessories Installation Instructions 29 April 2010
Rack mounting
Rack mount kit assembly continued
Attach center bracket
with 3 side screws
3
Install 3 top screws
4
Install 3 top screws
6
Postion
right-hand
unit
5

29 April 2010 K2 Solo Media Server Accessories Installation Instructions 9
Rack mounting
Rack mount kit assembly continued
Install 3 bottom screws
7
Attach side bracket
to right-hand unit
8

10 K2 Solo Media Server Accessories Installation Instructions 29 April 2010
Rack mounting
2. Install rack rails in rack as shown.
Attach with 2 front
screws on each side
1
Attach with 2 rear
screws on each side
2

29 April 2010 K2 Solo Media Server Accessories Installation Instructions 11
Rack mounting
3. Mount the coupled units as shown.
Position
on rails
1
Fasten with
4 screws
2

12 K2 Solo Media Server Accessories Installation Instructions 29 April 2010
Rack mounting