GREAT PLANES Piper j-3 cub User manual

INSTRUCTION MANUALINSTRUCTION MANUAL
RADIO CONTROLLED ALMOST READY-TO FLY ENGINE POWERED
SCALE PLANE
RADIO CONTROLLED ALMOST READY-TO FLY ENGINE POWERED
SCALE PLANE
PIPER J3 CUBPIPER J3 CUB
For
25 class
40 class
60 class
.40 Engine
4ch,5S
WING SPAN: 1550 mm LENGTH: 1061mm
WING Area 35.5 sq dm WEIGHT: 2100-2400g
Engine Required: 2C .40-.46 R/C Required:
.40 Engine
WING SPAN: 1550 mm LENGTH: 1061mm
WING Area 35.5 sq dm WEIGHT: 2100-2400g
Engine Required: 2C .40-.46 R/C Required: 4ch,5S
.60 Engine
4ch,5S
WING SPAN: 1800 mm LENGTH: 1260mm
WING Area 49.1 sq dm WEIGHT: 2300-2600g
Engine Required: 2C .60-.75 R/C Required:
.60 Engine
WING SPAN: 1800 mm LENGTH: 1260mm
WING Area 49.1 sq dm WEIGHT: 2300-2600g
Engine Required: 2C .60-.75 R/C Required: 4ch,5S
SPECIFICATION
.25 Engine
4ch,4S
WING SPAN: 1360 mm LENGTH: 932 mm
WING Area 28.6 sq dm WEIGHT: 1400-1700g
Engine Required: 2C .20-.30 R/C Required:
SPECIFICATION
.25 Engine
WING SPAN: 1360 mm LENGTH: 932 mm
WING Area 28.6 sq dm WEIGHT: 1400-1700g
Engine Required: 2C .20-.30 R/C Required: 4ch,4S

1 Main Wing
BEF0R Y0U BEGIN
LR
.Symbols used throughout the instruction manual, comprise:
BA
Assemble left and right sides the same way.
Apply instant glue (CA glue, super glue)
Apply epoxy glue
Note:
The pre-covered film may become wrinkly
due to variations of temperature.
Smooth out as explained right
Use an ironcovered with acloth.
Start at lowsetting .Increase thesetting
if necessary. If it is too high, you may
damage the film.
With cover Low setting
LR

4V / H TAIL
3
2Main wing
Aileron Servo For .25class
For .40-.60class
2x12

Push rod
5
6
Servo
7
Front
Rudder
Elevator
Throttle
3X12
2X10
Front

10 Main wing
9Main wing
2X10
M4X30
LR
3X12
2X10
3X12
3X12
Only .60 class
8Canopy

11 Wing setting