Greenhouse People 4X2 User manual

A (mm) B (mm)
4’3” x 4’3” 1295
4’3” x 6’3” 1910
4’3” x 8’3” 2530
4’3” x 10’4” 3150
4’3” x 12’4” 3770
1295
4’3” x 2’3” 670
R A N G E
SYSAN
4X2, 4X4, 4X6, 4X8, 4X10, 4X12

2
KEY
SYMBOL KEY DESCRIPTION
LOOK
THINK / CHOOSE?
THIS SECTION
RELATES TO ANOTHER
(e.g. 1 to 5)
CORRECT
DO NOT FIX DOWN!
TWIST TO LOCK
TIGHTEN
DO NOT WET!
Thank you for purchasing your new greenhouse. We recommend you familiarise yourself with the instructions and read all safety information
before you commence assembly.
These instructions are divided into sections; B-base, partlists,1-sides, 2-front gable, 3-rear, 4-joining the four sides together, 5-roof, 6-vent, 7-door,
8-glazing(8a toughened glass, 8b horticultural glass, 8c polycarbonate glazing when available), 9-vent attachment, 10-door attachment, 11 anchoring
down, back cover-packing list. If you need to contact us for assistance please refer to the relevant section/s.
Safety Warning
 Glass and aluminium can potentially cause injury. Please ensure you wear protective goggles, gloves, headgear and suitable footwear when
assembling and glazing the building.
 Please remember that glass is fragile and should be handled with extreme care. Always clear up and dispose of any breakages immediately.
 Do not assemble the greenhouse in high winds.
 For safety reasons and ease of assembly, we recommend that this greenhouse is assembled by a minimum of two people.
 Please clear all lying snow from the greenhouse roof as it can cause the roof to buckle or collapse.
Site Preparation
 When selecting a site for your greenhouse, it is vital that you choose as flat and level an area as possible.
 A concrete or slabbed base will provide the most solid foundation for your greenhouse.
 IMPORTANT: Do not fix your building down until the building is fully assembled, including glazing.
 Avoid placing your greenhouse under trees or in other vulnerable locations.
 To minimise the risk of wind damage, try to select as sheltered a site as possible, e.g. beside a hedgerow or garden fence.
Additional Considerations
 Please bear in mind that assembling your greenhouse can be time consuming. You may need to spread the construction over two or more
days. We recommend that you avoid leaving the building partially glazed. If you ever have to leave your greenhouse half assembled and not
anchored down, weigh it down with slabs or bags of sand to stop the wind moving it.
 You will find it helpful to prepare a large, clean and clear area in which to work in. A garage floor or flat lawn area is ideal.
 If you have arranged for someone to install your greenhouse for you, please check that all components are included. Most parts are numbered
and can be identified by a stamp or removable label. Alternatively, the components can be identified by lengths detailed in the packing list (see
diagram below).
 Anchoring down your greenhouse should be the final stage of construction (including glazing).
 Once installed your greenhouse requires little maintenance, but to maintain the smooth running of your door(s) WD40 or similar can be applied
to the door wheels and lower door guides.
Guarantee
 Your new greenhouse is guaranteed for 10 years against faulty manufacture of the framework. This does not include glazing, moving parts,
accidental damage or wind damage.
610mm
121

3
OPTION 1: base on grass
OPTION 2: base on slabs
OPTION 3: base on concrete
OPTION 4: no base on brick
A (mm) B (mm)
4’3” x 4’3” 1295
4’3” x 6’3” 1910
4’3” x 8’3” 2530
4’3” x 10’4” 3150
4’3” x 12’4” 3770
1295
4’3” x 2’3” 670
SY004 3720 2
SY009 3100 2
SY015 2480 2
SY029 1860 2
SY097 1240 2 4 2 2 2 2
SY098 620 2
SY160
280 4
Part
No. Section Size (mm) 4 2 4 4 4 6 4 8 4 10 4 12
160

4
2 3720 1
6 3100 1
12 2480 1
26 1860 1
57 1240 1
88 620 1
92 741 0 2 4 6 8 10
135 891 0 2 4 4 4 4
81
85
93
618
628
636
1
1
1 2 3 4
Part
No. Section Size (mm) 4 2 4 4 4 6 4 8 4 10
Page
Ref 4 12
42
1730
2
43
2
48 1488 4
59 1236 1
60 1236 1
62 1216 1
63 1216 1
76 1504 2
77 1504 2
89 728 2
90 728 2
1 3720 2
5 3100 2
17 2480 2
25 1860 2
55 1240 2
78 620 2
3 3720 2
8 3100 2
14 2480 2
27 1860 2
58 1240 2
91 620 2
21 1586 2 2
47 1504 0 2 4 6 8 10
4
132 304 2
133 304 2
201 2
200 4
Part
No. Section Size (mm) 4 2 4 4 4 6 4 8 4 10
Page
Ref 4 12
M4
M6
121 619 1 1 1 2 3 4
123 612 1 1 1 2 3 4
127 457 2 2 2 4 6 8
1 1 1 2 3 4
2 2 2 4 6 8
6 6 6
12 18 24
2 2 2 4 6 8

5
Part
No. Section Size (mm) 4 4 4 6 4 8 4 10 4 12
Page
Ref 4 2
10mm
106
SYBOL
M6X11
120 130 142 150 96
SY
NUT
M6
98 107 120 130 142 150
SYBOL
M6X11
CROP
2 1
10
N/A
10
124 156 188 220 252 284
44 60 76 90 104 120
3
roll
3
roll
4
roll
5
roll
5
roll
5
roll
4
HE
131 304 8
64 1605 1
46 1605 3
129 299 2
4
4
4
4000 1
53 1284 1
2
79 168 2
Part
No. Section Size (mm) 4 2 4 4 4 6 4 8 4 10 4 12

6
Part No mm Quantity
58 1245 2
47 1504 2
55 1245 2
21 1585 2
Part No mm Quantity
8 3100 2
47 1504 8
5 3100 2
21 1585 4
Part No mm Quantity
14 2480 2
47 1504 6
17 2480 2
21 1585 4
Part No mm Quantity
27 1860 2
47 1504 4
25 1860 2
21 1585 4
Part No mm Quantity
3 3720 2
47 1504 10
1 3720 2
21 1585 4
6’
8’
10’
12’
27
25
14
17
8
5
3
1
4’
58
55
X 2
X 2
X 2
X 2
X 2
Part No mm Quantity
91 620 2
78 620 2
21 1586 2
2’
X 2
91
78
M6
6
M6
6
M6
12
M6
12
M6
16
M6
16
M6
20
M6
20
M6
24
M6
24
M6
2
M6
2
ALL VIEWS
INTERNAL
On the 2’ long model the sides have no
vertical side bar ‘47’. Because of this
the sides have little substance and you
will find it easier to skip this section ‘1’
until you have built the front (section 2)
and rear (section 3). The sides can then
be built in situ during section ‘4’ where
the gutters ‘91’ and cills ‘78’ will allow
the front and rear to connect.

7
47
21
47

8
60
48
42 /
43 60 76 /
77
60
48
76 77
132
43
53
89 90
42
133
48
132
This bar is currently
riveted to the door
track assembly (53).
ALL VIEWS
INTERNAL
INTERNAL VIEW
Part No SY053 SY060 SY042 /
SY043 SY048 SY089 / SY090 SY076 / SY077 SY133 SY132 SY200 SY201 SYBOL M6X11 SYNUT M6
Detail
Length
‘mm’ 1284 1236 1734 1488 728 1504 304 304 N/A N/A 10 N/A
Quantity 1 1 1 + 1 2 1 + 1 1 + 1 2 2 2 1 32 32

9
42 /
43
89 /
90
89 90
133
48
133
89 /
90
48
132
76 /
77
This bar is cur-
rently riveted to
the door track
assembly (53).
ALL VIEWS
INTERNAL

10
76 /
77
48
42 /
43 59 59
ALL VIEWS
INTERNAL
59
48
76 77
62
43
89 90
42
63
48
INTERNAL VIEW
Part No SY042 /
SY043 SY089 / SY090 SY076 / SY077 SY063 SY059 SY048 SY062 SY200 SY201 SYBOL M6X11 SYNUT M6
Detail
Length
‘mm’ 1734 728 1504 1216 1236 1488 1216 N/A N/A 10 N/A
Quantity 1 + 1 1 + 1 1 + 1 1 1 2 1 2 1 30 30

11
42 /
43
89 /
90
63 63
89 /
90
76 /
77
48
62
62
89 90
ALL VIEWS
INTERNAL

12

13
Packed with base!
18mm
7mm
If you have a metal base and you live in a windy
location then you should drill and fix the frame to
the base using 10mm nuts and bolts. Drill centrally
between two vertical glazing bars for neatness (it is
not essential to drill every section). Make sure the
bolt head does NOT interfere with the line of the
glass. Cills should be drilled 18mm from the inside
vertical face to avoid the front glass face. Do NOT
anchor the structure to the ground until the end!
M6 CROP
159

14
6’ Part No mm Quantity
26 1860 1
92 741 4
93 636 1
135 891 4
14
2’ Part No mm Quantity
88 620 1
92 741 0
81 618 1
135 894 0
2
1
1 2
2
3
3 4
4
4’ Part No mm Quantity
57 1240 1
92 741 2
85 628 1
135 891 2
7
135
135
92
92
135
21

15
8’ Part No mm Quantity
12 2480 1
92 741 6
93 636 2
135 891 4
20
12’ Part No mm Quantity
2 3720 1
92 741 10
93 636 4
135 891 4
32
10’ Part No mm Quantity
6 3100 1
92 741 8
93 636 3
135 891 4
28
X 2
M4 X 4
81 /
85 /
93?

16
127
121
121
127
610 x 457
M6 10mm X 2
X 2
X 4
M4 X 2
M4 X 2
X 4
X 1
1000mm
Part No mm Quantity
121 619 1
123 612 1
127 457 2

17
123
610 x 457

18
131
131
131
129 129
46
64
46
46 131
131
131
ALL VIEWS
INTERNAL
Part No SY
129 SY 131 SY 046 SY 064 SY
DOOR
GLIDE
SY
WHEEL SY BOL
DOOR
SY
NUT
DOOR
SY
DOOR
STOP
SY
FOAM SY DRA SYBOL M6X11 SYNUT M6
Detail
Length
‘mm’ 299 304 1605 1605 100
(PLASTIC) N/A N/A N/A N/A 6400 (FOAM) 4000 (FLUFF) 10 N/A
Quantity 2 8 3 1 4 4 4 4 2 1 1 32 32
FLUFF FLUFF

19
Glazing tips for sections 7 & 8:
 The foam (see left) goes longitudinally in three
sections on each door stile and all over the
greenhouse frame, see overleaf, including the
roof corner bars. It never goes horizontally, the
glass just sits directly onto the aluminium cills in
the sides.
 Remove the white paper on the foam before it
gets wet as it is difficult to remove, i.e. it comes
off in small pieces.
 Clips (see overleaf) go roughly 1
every 305mm (1’) e.g. 610 x 610
pane you would have 2 per side.
129
131
131
46
46
46 64
FLUFF

20
The adhesive foam
(SYFOAM) goes longitu-
dinally over the green-
house frame, see exam-
ples to the right. It never
goes horizontally, the
glass just sits directly
onto the aluminium cills in
the sides.
Remove the white paper
on the foam before it gets
wet as it is difficult to re-
move, i.e. it comes off in
small pieces.