GREENIS FGR-8800 User manual

POWER BLENDER
Ningbo Greenis Home Appliances Co., Ltd.
www.greenishome.com
FGR-8800

01 GREENIS POWER BLENDER GREENIS POWER BLENDER 02
TABLE OF CONTENTS
WELCOME
Congratulations! Thank you for choosing Greenis product and you are now
the proud owner of Greenis BLDC Power Blender. Greenis BLDC Power Blender
is a revolutionary appliance featuring ground-breaking innovations in order to
redefine user experience with blenders. Its lower noise, smart control and
powerful force will amaze you in every way!
All content in this manual is for reference only and if you find any information
unspecified please inform us for supplementing purpose in next edition. Its
design and workings are subject to change without warning due to continual
product development.
We hope you enjoy the experience with Greenis as it helps you embark on a
journey to richer nutrition and better health!
To ensure that Greenis is in proper condition and you can make the most out
of it in years ahead, please take the time to read through the user manual for
proper use and better maintenance.
IMPORTANT SAFEGUARDS
To ensure safety please read through the manual before using and keep the
manual where it is easily accessible. This product is intended for household
use only and please follow instructions of use and assembly in the manual.
Read all instructions.
Please ensure the current, voltage and frequency are in accordance with the standard in your
country.
1. The appliance is not to be used by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given super-
vision or instruction.
2. Close supervision is necessary when any appliance is used by or near children.
To avoid danger of electric shock, please DO NOT immerse the motor base in water (or any
other liquid) or pour water onto the machine.
Please unplug the machine if it is to be in long-time disuse. Unplug from outlet when not in use,
before putting on or taking o parts and before cleaning.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions,
or is dropped or damaged in any manner. Contact customer service for information on exam-
ination, repair, or adjustment.
It may cause fire, electric shock or human injury if using unauthorized parts & accessories or
refitting machine without authorization.
DO NOT leave the machine unattended when it is in use.
When using the machine please ensure water or any other liquid in the jar does not exceed
maximum scale marked on the jar surface.
DO NOT operate the machine with no ingredient or water inside the jar.
Please keep the machine away from intense heat. DO NOT place it on a cloth in case of damage
to parts.
This product is intended for indoor use only. Do not use outdoors.
DO NOT use the appliance for more than 30 minutes continuously as the motor may burn out;
use it again until the appliance has cooled down.（To prolong the service life of the product,
please pause for 45 minutes to let the motor cool down after the use.）
To reduce the risk of injury, never place cutter-assembly blades on base without jar properly
attached.
Blades must be assembled, disassembled and changed by the manufacturer, it's service agent
or similarly qualified persons in order to avoid a hazard.
The use of attachments, including canning jars, not recommended by the manufacturer may cause
a risk of injury to persons.
Do not let cord hang over edge of table or counter.
Keep hands and utensils out of container while blending to reduce the risk of severe injury to
persons or damage to the blender. A scraper may be used but must be used only when the blend-
er is not running.
Be careful when handing the sharp cutting blades, emptying the jar and during cleaning.
Be careful if hot liquid is poured into or blender as it can be ejected out of the appliance due to a
sudden steaming.
Switch o the appliance and disconnect from supply before changing accessories or approaching
parts that move in use.
Please secure the lid and measuring cup in place before use. Always operate blender with cover in
place. Do secure the lid when making hot drinks (soups) and start with low speed as otherwise high
speed may lead to liquids splashing to cause injuries.
The motor will automatically stop when encountering work overload as the interior temperature
detection system is activated to protect the machine from risk of burning out. It can only get back to
work after cooling o for 45 minutes.
Blades are sharp. Handle carefully. Please be careful when cleaning.
Do avoid contact with any moving part.
The product is fitted with tamper and please ensure you use the tamper when the lid is secured on
the jar.
DO NOT place any other implement like spoons, forks and knives into the jar as they may cause
damage to blades and other parts.
Flashing light indicates ready to operate. Avoid inadvertent contact with the touch screen.
12
01
02-03
04-05
06-08
08-09
09
10
11
Welcome
Important Safeguards
Product Components
How to Use It
Use Precautions
Cleaning and Maintenance
Product Safety Instructions
Troubleshooting
What’s in the Box/Product Specifications

03 GREENIS POWER BLENDER GREENIS POWER BLENDER 04
IMPORTANT SAFEGUARDS PRODUCT COMPONENTS
01. Measuring cup
02. Lid
03. Water-proof ring
04. Tamper
05. Jar
06. Jar base
07. Blades
08. Blade plate
09. Shock-proof mat
10. Drive socket
11. Control panel
12. Power cord
13. Motor base
14. Foot pads
01
02
03
04
05
06
07
08
09
10
11
13
14
12
15. Spatula
15
To ensure safety please read through the manual before using and keep the
manual where it is easily accessible. This product is intended for household
use only and please follow instructions of use and assembly in the manual.
Read all instructions.
Please ensure the current, voltage and frequency are in accordance with the standard in your
country.
1. The appliance is not to be used by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given super-
vision or instruction.
2. Close supervision is necessary when any appliance is used by or near children.
To avoid danger of electric shock, please DO NOT immerse the motor base in water (or any
other liquid) or pour water onto the machine.
Please unplug the machine if it is to be in long-time disuse. Unplug from outlet when not in use,
before putting on or taking o parts and before cleaning.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions,
or is dropped or damaged in any manner. Contact customer service for information on exam-
ination, repair, or adjustment.
It may cause fire, electric shock or human injury if using unauthorized parts & accessories or
refitting machine without authorization.
DO NOT leave the machine unattended when it is in use.
When using the machine please ensure water or any other liquid in the jar does not exceed
maximum scale marked on the jar surface.
DO NOT operate the machine with no ingredient or water inside the jar.
Please keep the machine away from intense heat. DO NOT place it on a cloth in case of damage
to parts.
This product is intended for indoor use only. Do not use outdoors.
DO NOT use the appliance for more than 30 minutes continuously as the motor may burn out;
use it again until the appliance has cooled down.（To prolong the service life of the product,
please pause for 45 minutes to let the motor cool down after the use.）
To reduce the risk of injury, never place cutter-assembly blades on base without jar properly
attached.
Blades must be assembled, disassembled and changed by the manufacturer, it's service agent
or similarly qualified persons in order to avoid a hazard.
The use of attachments, including canning jars, not recommended by the manufacturer may cause
a risk of injury to persons.
Do not let cord hang over edge of table or counter.
Keep hands and utensils out of container while blending to reduce the risk of severe injury to
persons or damage to the blender. A scraper may be used but must be used only when the blend-
er is not running.
Be careful when handing the sharp cutting blades, emptying the jar and during cleaning.
Be careful if hot liquid is poured into or blender as it can be ejected out of the appliance due to a
sudden steaming.
Switch o the appliance and disconnect from supply before changing accessories or approaching
parts that move in use.
Please secure the lid and measuring cup in place before use. Always operate blender with cover in
place. Do secure the lid when making hot drinks (soups) and start with low speed as otherwise high
speed may lead to liquids splashing to cause injuries.
The motor will automatically stop when encountering work overload as the interior temperature
detection system is activated to protect the machine from risk of burning out. It can only get back to
work after cooling o for 45 minutes.
Blades are sharp. Handle carefully. Please be careful when cleaning.
Do avoid contact with any moving part.
The product is fitted with tamper and please ensure you use the tamper when the lid is secured on
the jar.
DO NOT place any other implement like spoons, forks and knives into the jar as they may cause
damage to blades and other parts.
Flashing light indicates ready to operate. Avoid inadvertent contact with the touch screen.
SAVE THESE INSTRUCTIONS
Warning!
Electric Shock !
DO NOT use plug adapter or extension cord.
Attention: Failure to follow safety and use instructions shall void the product warranty and
may cause severe damages or injuries.

05 GREENIS POWER BLENDER GREENIS POWER BLENDER 06
PRODUCT COMPONENTS HOW TO USE IT
Touch Control Panel
Speed
Time +
-
+
-
+
-
+
-
Time Speed
Bluetooth
PulseOn/Off
Child Lock
Pre-programmed Cycles
Child Lock
The “Child Lock” light will be flickering when the touch control panel is locked to prevent
unintended operations.
(Optional)
“ ”
Hold “Child Lock” button for 3 seconds to unlock the touch control panel.
The control panel will get automatically locked if without being operated for 1 minute.
Tap “On/O” button to start working after setting the cycle, and tap it to stop during
work.
On/Off “ ”
Bluetooth “ ”
The Bluetooth function will only work when connected to mobile phone.
The Bluetooth light will be flickering before connection and be normally on during
connection.
Time
Tap “Time+” or “-” button to adjust time with an increase or decrease of 5 seconds per
touch.
Hold “Time+” or “-” button to quickly adjust time within 0 - 30 minutes.
Tap “On/O” to return to 0.
Speed
Tap “Speed+” or “-” button to increase or decrease speed within 1 - 10 variables, namely
1, 2, 3, ..., 10.
Quick adjustment is not available with speed.
Pulse “ ”
Hold “Pulse” button to keep working at the highest speed 10.
Release the button to stop.

07 GREENIS POWER BLENDER
GREENIS POWER BLENDER 08
HOW TO USE IT
Pre-programmed Cycles
Unlock “Child Lock” and select desired pre-programmed cycle. Tapping “On/O” the unit will
start working as per selected cycle and the machine will automatically stop upon completing
the cycle. (Tap “On/O” to stop during the process.)
Picture Cycle Recipe
Ice Cream 3 tbsp granulated sugar
350g frozen blueberries
Whole Juice 1/4 Cucumber 1 Celery 1 Apple
600ml Water 9 Ice cubes
Milkshake 2 frozen bananas
1/4 cup chocolate milk
Smoothie 150g Fresh sliced pineapple 500g Ice grains
300ml Pineapple juice
Sauce 500g Salted peanuts
(tamper required)
Hot Drinks
150g Soaked soybeans (for better flavour
soaked in boiling water for 0.5 h in advance)
500ml Boiling water 60g White sugar
Ice Cubes 9 - 12 Ice cubes
USE PRECAUTIONS
About measuring cup, lid and seal ring：
Place the measuring cup onto the lid (place measuring cup through the central opening of
lid and twist clockwise to fasten) and place the lid onto the jar securely. When placing the
lid on the jar please make sure the corner of lid with “lock sign” aligns with the corner of
jar near the jar handle.
The machine will not start unless the lid is securely in place.
Make sure the lid is securely placed on the jar and the machine is not running before
putting the tamper.
The seal ring around the lid is detachable. When cleaning remove seal ring from the lid to
thoroughly clean away residues stuck inside the seal ring and the lid.
Other important precautions：
Stirring ingredient that is fermentative or dry (little water content) for a long time may
cause over-heating and thus trigger overheating protection mechanism built inside the
motor. Therefore please start with low speed and change to high speed if the ingredients
are thick or rather dry. If it's still dicult to stir, please shut down the power, reduce
amount of ingredients or add liquid to decrease viscosity.
The motor will stop working when overheated. Unplug the blender and cool down the
motor for 45 minutes in a drafty place or in front of a fan.
During the operation, make sure the lid and measuring cup are fastened tightly, in case
the food inside would splash out and cause injuries.
During the operation, DO NOT put hand, any tool (like spoon), or other hard object into
the blender jar, in case of any danger or damage.
When making hot drinks (like soybean milk, rice paste, pottage, etc.), make sure the lid
and measuring cup are fastened tightly, and set the speed from low speed to high speed.
HOW TO USE IT
IMPORTANT!
Make sure the lid is securely placed on the jar if tamper is to be used. Shut down the
blender before placing tamper through the hole of lid, in case of food splashing to cause
injuries.
Do not use other implements to replace the tamper if it is missing, which may otherwise
cause injuries.
Please contact local dealer to purchase replacement part.

09 GREENIS POWER BLENDER GREENIS POWER BLENDER 10
When making sauces (like almond paste, jam, peanut butter or sesame paste, etc.),
stung, or shell grains, the volume of ingredients must be among 3 cups to 5 cups; DO
NOT operate continuously for a long time, in case there will be scorched flavor because of
overheating. Too many ingredients may also cause overload, triggering motor’s
over-temperature protection.
Please place liquid and soft ingredients first before hard ones like ice cubes.
DO NOT remove the jar until the blades come to a full stop. Otherwise it may cause
damages to drive socket.
Please stop the machine once smelling any scorching smell. It may be caused by overload
of ingredients or the fact blades and drive socket are not fully engaged.
It is recommended to operate the machine no more than 10 minutes at a time.
PRODUCT SAFETY INSTRUCTIONS
Correct way of using tamper
× √
√ ×
Correct way of assembling lid Incorrect way of assembling lid
CLEANING & MAINTENANCE
Please ensure the blender is unplugged before cleaning or maintenance.
Do not immerse motor base or power cords into water or any other liquid.
Use soft cloth or sponge to wipe clean the surface of jar. Remove the measuring cup
and seal ring before proceeding to cleaning.
Attention:
Lay down the jar horizontally in a drafty place or place it upside down to let it dry
naturally. Do not immerse it entirely in water.
Do not rinse motor base with clean water. Use soft cloth to clean instead.
When drying the machine by placing it in an upside-down position, please wipe away
leftover water at the bottom of the jar. Keep it away from the sink in case of any water
dripping into the bottom of the jar and potentially rusting interior key components like
metal bearing.
Warm Prompts:
To thoroughly clean the inside of the jar and leftover dirt on the blades and ensure durability
of jar and blades, it is recommended to add some clean water and lemon into jar, secure the
lid and press button “PULSE” to quick clean for 2-3 times. Pour away water and repeat the
step.
Simple cleaning:
Attention: Do not immerse jar into water
1. Add 750 ml clean water and 1-2 lemon slices, tap button “ ” (running for 1 min 56s).
2. Pour away dirty water and repeat step no.1.
3. Pour away dirty water and wipe it clean with cloth. Dry the jar in a drafty place.
Rinse the jar with clean water after each use. Or you can add 2 cups of clean water (1 L)
into the jar, secure the lid, and tap button “ ” to clean.
Point the lid corner with a lock sign
towards the direction of the jar handle,
in order to activate the safety switch.

11 GREENIS POWER BLENDER GREENIS POWER BLENDER 12
WEEE
Correct Disposal of this product
This marking indicates that this product should not be disposed with other house-
hold wastes throughout the EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To return your used device, please use
the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
TROUBLESHOOTING
Fault Possible cause Possible solution
The unit does not work
after being connected
to power (no display on
the control panel).
The jar is not securely placed
on the motor base or the lid is
not in place.
Remove the jar or lid and place
them properly.
The LCD display
indicates E2 or E3.
E2 means motor overheating
protection is activated.
E3 means motor overloading
protection is activated.
When the LCD display indicates E2,
cool o the machine for 45 minutes
and reduce ingredients.
When the LCD display indicates E3,
remove big chunks of ingredients
that clog the blades.
Bluetooth cannot be
connected.
1. Switch o the machine and remove the
jar. Check if there are any foreign objects
on the mat. Place the jar back in position
again.
2. Remove the measuring cup from the lid
and a 6-cm-wide opening is revealed. Use
the tamper to stir through the opening.
The machine suddenly
stops during the
operation.
The lid is blown out by
the food.
Place the lid back in position and
restart the machine.
Abnormal noise
during the operation.
1. Either the jar or mat is not
correctly assembled.
2. Foreign objects are stuck
on the drive socket.
The cell phone’s Bluetooth is
not activated or it is out of
eective distance.
1. Try to open cell phone’s Bluetooth
again.
2. Place the cell phone as near as
within 3 meters from the machine.
All lights are on while
touch buttons do not
work.
1. Caused by capacitance
interference of touch panel.
2. Tap any two of buttons
simultaneously.
1.Unplug the machine. Plug again
and tap "On/O" button to restart.
2.Release one button (only
touching one button at a time).
Attention:
Above are general problems users may encounter and possible solutions they can
adopt. For other problems with the machine, please contact local after-sales for
repair purpose. Do not open the machine and repair by yourself.
PRODUCT SPECIFICATIONS
Model FGR-8800
Voltage/Frequency See rating label on base of product
Rated power 1000W
Dimensions 21(L)*22.5(W)*50(H) cm
WHAT’S IN THE BOX
Motor base
Jar
Lid
Measuring cup
Tamper
Spatula
Cleaning brush
Drive socket (spare)
Seal ring for lid (spare)
User manual
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit

13 GREENIS POWER BLENDER GREENIS POWER BLENDER 14
Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
“This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the
radiator and your body.”