GREENIS FGR-8830 User manual

POWER BLENDER
FGR-8830
Ningbo Greenis Home Appliances Co., Ltd
http://greenis.com

01 GREENIS POWER BLENDER
Criteria On Ingredients For DIY Recipe:
TABLE OF CONTENTS
10
12
01
02-04
05-06
07-08
09
09
10
11
Welcome
Important Safeguards
Product Components
How to Use It
Definitions of buttobs under DIY editing mode
How to run DIY program cycle
How to self-program a DIY recipe
Precautions on programming steps of recipe
How to Use It
Troubleshooting
15
12-13
14
16
What’s In The Box/Product Specifications
17
Use Precautions
Cleaning & Maintenance
Product Safety Instructions
WELCOME
GREENIS POWER BLENDER 02
To ensure that Greenis is in proper condition and you can make the most out of it in years ahead, please
take the time to read through the user manual for proper use and better maintenance.
All content in this manual is for reference only and if you find any information unspecified please inform
us for supplementing purpose in next edition. Its design and workings are subject to change without
warning due to continual product development.
We hope you enjoy the experience with Greenis as it helps you embark on a journey to richer nutrition
and better health!
IMPORTANT SAFEGUARDS
Read all instructions.
Please ensure the current, voltage and frequency are in accordance with the standard
in your country.
1. The appliance is not to be used by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction.
2. Close supervision is necessary when any appliance is used by or near children.
To avoid danger of electric shock, please DO NOT immerse the motor base in water
(or any other liquid) or pour water onto the machine.
Please unplug the machine if it is to be in long-time disuse. Unplug from outlet when
not in use, before putting on or taking o parts and before cleaning.
Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Contact customer service for
information on examination, repair, or adjustment.
It may cause fire, electric shock or human injury if using unauthorized parts & acces-
sories or refitting machine without authorization.
DO NOT leave the machine unattended when it is in use.
When using the machine please ensure water or any other liquid in the jar does not
exceed maximum scale marked on the jar surface.
DO NOT operate the machine with no ingredient or water inside the jar.
Please keep the machine away from intense heat. DO NOT place it on a cloth in case of
damage to parts.
To ensure safety please read through the manual before using and keep the
manual where it is easily accessible. This product is intended for household
use only and please follow instructions of use and assembly in the manual.
This product is intended for indoor use only. Do not use outdoors.
DO NOT use the appliance for more than 30 minutes continuously as the motor may
burn out; use it again until the appliance has cooled down.（To prolong the service
life of the product, please pause for 45 minutes to let the motor cool down after the use.）
To reduce the risk of injury, never place cutter-assembly blades on base without jar
properly attached.
Ask an authorized distributor to disassemble or change blades.
The use of attachments, including canning jars, not recommended by the manufactur-
er may cause a risk of injury to persons.
Do not let cord hang over edge of table or counter.
Keep hands and utensils out of container while blending to reduce the risk of severe
injury to persons or damage to the blender. A scraper may be used but must be used
only when the blender is not running.
Be careful when handing the sharp cutting blades, emptying the jar and during cleaning.
Be careful if hot liquid is poured into or blender as it can be ejected out of the appli-
ance due to a sudden steaming.
Switch o the appliance and disconnect from supply before changing accessories or
approaching parts that move in use.
Please secure the lid and measuring cup in place before use. Always operate blender
with cover in place. Do secure the lid when making hot drinks (soups) and start with
low speed as otherwise high speed may lead to liquids splashing to cause injuries.
The motor will automatically stop when encountering work overload as the interior
temperature detection system is activated to protect the machine from risk of burning
out. It can only get back to work after cooling o for 45 minutes.
Blades are sharp. Handle carefully. Please be careful when cleaning.
Do avoid contact with any moving part.
The product is fitted with tamper and please ensure you use the tamper when the lid is
secured on the jar.
DO NOT place any other implement like spoons, forks and knives into the jar as they
may cause damage to blades and other parts.
Flashing light indicates ready to operate. Avoid inadvertent contact with the touch
screen.

03 GREENIS POWER BLENDER GREENIS POWER BLENDER 04
SAVE THESE INSTRUCTIONS
Warning!
Electric Shock !
DO NOT use plug adapter or extension cord.
Attention: Failure to follow safety and use instructions shall void the product warranty and
may cause severe damages or injuries.
Read all instructions.
Please ensure the current, voltage and frequency are in accordance with the standard
in your country.
1. The appliance is not to be used by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction.
2. Close supervision is necessary when any appliance is used by or near children.
To avoid danger of electric shock, please DO NOT immerse the motor base in water
(or any other liquid) or pour water onto the machine.
Please unplug the machine if it is to be in long-time disuse. Unplug from outlet when
not in use, before putting on or taking o parts and before cleaning.
Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Contact customer service for
information on examination, repair, or adjustment.
It may cause fire, electric shock or human injury if using unauthorized parts & acces-
sories or refitting machine without authorization.
DO NOT leave the machine unattended when it is in use.
When using the machine please ensure water or any other liquid in the jar does not
exceed maximum scale marked on the jar surface.
DO NOT operate the machine with no ingredient or water inside the jar.
Please keep the machine away from intense heat. DO NOT place it on a cloth in case of
damage to parts.
This product is intended for indoor use only. Do not use outdoors.
DO NOT use the appliance for more than 30 minutes continuously as the motor may
burn out; use it again until the appliance has cooled down.（To prolong the service
life of the product, please pause for 45 minutes to let the motor cool down after the use.）
To reduce the risk of injury, never place cutter-assembly blades on base without jar
properly attached.
Ask an authorized distributor to disassemble or change blades.
The use of attachments, including canning jars, not recommended by the manufactur-
er may cause a risk of injury to persons.
Do not let cord hang over edge of table or counter.
Keep hands and utensils out of container while blending to reduce the risk of severe
injury to persons or damage to the blender. A scraper may be used but must be used
only when the blender is not running.
Be careful when handing the sharp cutting blades, emptying the jar and during cleaning.
Be careful if hot liquid is poured into or blender as it can be ejected out of the appli-
ance due to a sudden steaming.
Switch o the appliance and disconnect from supply before changing accessories or
approaching parts that move in use.
Please secure the lid and measuring cup in place before use. Always operate blender
with cover in place. Do secure the lid when making hot drinks (soups) and start with
low speed as otherwise high speed may lead to liquids splashing to cause injuries.
The motor will automatically stop when encountering work overload as the interior
temperature detection system is activated to protect the machine from risk of burning
out. It can only get back to work after cooling o for 45 minutes.
Blades are sharp. Handle carefully. Please be careful when cleaning.
Do avoid contact with any moving part.
The product is fitted with tamper and please ensure you use the tamper when the lid is
secured on the jar.
DO NOT place any other implement like spoons, forks and knives into the jar as they
may cause damage to blades and other parts.
Flashing light indicates ready to operate. Avoid inadvertent contact with the touch
screen.

PRODUCT COMPONENTS
05 GREENIS POWER BLENDER GREENIS POWER BLENDER 06
PRODUCT COMPONENTS
Pre-programmed
Cycles
01
02
04
09
11
03
05
06
07
08
10
12
13
14

07 GREENIS POWER BLENDER GREENIS POWER BLENDER 08
HOW TO USE IT
Child Lock
The “Child Lock” light will be flickering when the touch control panel is locked to prevent
unintended operations.
Hold “Child Lock” button for 3 seconds to unlock the touch control panel.
The control panel will get automatically locked if without being operated for 1 minute.
HOW TO USE IT
50 sec
Work for 50 sec at speed 10.
(The jar should be dry and
waterless when grinding)

09 GREENIS POWER BLENDER GREENIS POWER BLENDER 10
DEFINITIONS OF BUTTONS UNDER
DIY EDITING MODE
HOW TO RUN DIY PROGRAM CYCLE:
As other buttons of cycles, tap DIY and power button to start running DIY cycle.
Adjust time
Press and hold to enter editing mode
Adjust time
Save step
Save entire program
Cancel
A recipe program is normally composed of several steps to which individual speed and time is
corresponded.
Tap and hold DIY button for 2 seconds to enter editing mode whilst the display shows “DIY”. To edit 1st
step (while display shows“S1”). Rotate the speed control dial to select desired speed, And tap“ ” and
“ ”to set desired time. Tap “ ” button to save the 1st step whilst display shows “S. 01” to indicate
success of step 1 being programmed. Moving to the following steps, such operation method applies to
every step of the way. Each step (S1,S2,S3...) must be saved by tapping “ ”button. The recipe program
is composed of no more than 18 steps.
After all steps are programmed into DIY button, tap COMPLETE “ ”to save the entire program. Then
the machine will stand by with DIY cycle automatically selected. Tap power button to run the cycle which
has been programmed.
It is essential to tap SAVE “ ” button to save current step when programming each step.
If a program is merely 1 step, tapping COMPLETE “ ” will save the program which eliminates the use
of SAVE” ” button.
A recipe that has been validly programmed will replace previous DIY program.
The machine may beep to indicate of failure if any programming goes wrong. Such failure does not aect
or replace existing recipe program.
To ensure its long service life, the machine is preset at the workload of no more than 30 minutes working
continuously. The machine will verify the duration of new program is no longer than 15 minutes. Otherwise
programming fails whilst the machine beeps twice to indicate failure.
A recipe program is composed of 18 steps at most. The display will show “FULL” to indicate the full limit
for steps. (The 18th step is still programmable but adding extra step is impossible)
HOW TO SELF-PROGRAM A DIY RECIPE:
PRECAUTIONS ON PROGRAMMING
STEPS OF RECIPE:

11 GREENIS POWER BLENDER GREENIS POWER BLENDER 12
HOW TO USE IT
For easier use, the 1st step is forbidden to be at speed “0”. (A failure to set speed other than “0” will
disable 1st step to be saved.)
Default recipe for DIY button is ICE CRUSH.
If the last step fails to be saved without tapping SAVE “ ” button when programming
multiple steps, the program will only include previous steps excluding the last step after tapping
COMPLETE “ ”.
Under DIY editing mode a continuous no-operation for 30 seconds will dim the display. A continuous
no-operation for 3 minutes will exit DIY editing mode. The steps that have been programmed will not
be saved.
Under DIY editing mode removing the jar will turn o the machine meanwhile exiting editing mode.
A valid DIY program will be stored into memory of the machine and last for 20 years whether machine
is connected to power or not.
Repeatable read-write cycles for DIY programming are 100,000 times.
(1) For speed 1-5 applicable ingredients are roots and leaves of vegetables,fruits and the like. The
adequate proportion for ingredients and water is 2:3. Ensure that the volume does not exceed
maximum scale 2000 ml of the jar.
(2) For speed 6-10 applicable ingredients are ice cubes no more than 200 ml(individual ice cube size
no large than 20*20 mm) or nuts no more than 250 g. Water should not be added into the jar when
grinding nuts.
Tips: DIY program is suitable for fruit and vegetables only. It does not apply to overly thick ingredi-
ents.The DIY program is composed of no more than 18 steps.The continuous working time for DIY
program is no longer than 15 minutes.
Attention: above criteria apply for ingredients added into the jar under Pulse mode or when rotating
dial to operate the machine.
CRITERIA ON INGREDIENTS FOR
DIY RECIPE:
A recipe program is normally composed of several steps to which individual speed and time is
corresponded.
Tap and hold DIY button for 2 seconds to enter editing mode whilst the display shows “DIY”. To edit 1st
step (while display shows“S1”). Rotate the speed control dial to select desired speed, And tap“ ” and
“ ”to set desired time. Tap “ ” button to save the 1st step whilst display shows “S. 01” to indicate
success of step 1 being programmed. Moving to the following steps, such operation method applies to
every step of the way. Each step (S1,S2,S3...) must be saved by tapping “ ”button. The recipe program
is composed of no more than 18 steps.
After all steps are programmed into DIY button, tap COMPLETE “ ”to save the entire program. Then
the machine will stand by with DIY cycle automatically selected. Tap power button to run the cycle which
has been programmed.
It is essential to tap SAVE “ ” button to save current step when programming each step.
If a program is merely 1 step, tapping COMPLETE “ ” will save the program which eliminates the use
of SAVE” ” button.
A recipe that has been validly programmed will replace previous DIY program.
The machine may beep to indicate of failure if any programming goes wrong. Such failure does not aect
or replace existing recipe program.
To ensure its long service life, the machine is preset at the workload of no more than 30 minutes working
continuously. The machine will verify the duration of new program is no longer than 15 minutes. Otherwise
programming fails whilst the machine beeps twice to indicate failure.
A recipe program is composed of 18 steps at most. The display will show “FULL” to indicate the full limit
for steps. (The 18th step is still programmable but adding extra step is impossible)
About measuring cup, lid and seal ring：
USE PRECAUTIONS
Place the measuring cup onto the lid (place measuring cup through the central opening of lid and
twist clockwise to fasten) and place the lid onto the jar securely. When placing the lid on the jar
please make sure the corner of lid with “lock sign” aligns with the corner of jar near the jar handle.
The machine will not start unless the lid is securely in place.
Make sure the lid is securely placed on the jar and the machine is not running before putting the
tamper.
The seal ring around the lid is detachable. When cleaning remove seal ring from the lid to thoroughly
clean away residues stuck inside the seal ring and the lid.

13 GREENIS POWER BLENDER GREENIS POWER BLENDER 14
Other important precautions：
USE PRECAUTIONS
Stirring ingredient that is fermentative or dry (little water content) for a long time may cause
over-heating and thus trigger overheating protection mechanism built inside the motor. Therefore
please start with low speed and change to high speed if the ingredients are thick or rather dry. If it's
still dicult to stir, please shut down the power, reduce amount of ingredients or add liquid to
decrease viscosity.
The motor will stop working when overheated. Unplug the blender and cool down the motor for 45
minutes in a drafty place or in front of a fan.
During the operation, make sure the lid and measuring cup are fastened tightly, in case the food
inside would splash out and cause injuries.
During the operation, DO NOT put hand, any tool (like spoon), or other hard object into the blender
jar, in case of any danger or damage.
When making hot drinks (like soybean milk, rice paste, pottage, etc.), make sure the lid and measur-
ing cup are fastened tightly, and set the speed from low speed to high speed.
When making sauces (like almond paste, jam, peanut butter or sesame paste, etc.), stung, or shell
grains, the volume of ingredients must be among 3 cups to 5 cups; DO NOT operate continuously for
a long time, in case there will be scorched flavor because of overheating. Too many ingredients may
also cause overload, triggering motor’s over-temperature protection.
Please place liquid and soft ingredients first before hard ones like ice cubes.
DO NOT remove the jar until the blades come to a full stop. Otherwise it may cause damages to drive
socket.
Please stop the machine once smelling any scorching smell. It may be caused by overload of
ingredients or the fact blades and drive socket are not fully engaged.
It is recommended to operate the machine no more than 10 minutes at a time.
Please ensure the blender is unplugged before cleaning or maintenance.
Attention:
Warm Prompts:
Simple cleaning:
Attention: Do not immerse jar into water
1. Add 750 ml clean water and 1-2 lemon slices, tap button “ ” (running for 1 min 56s).
2. Pour away dirty water and repeat step no.1.
3. Pour away dirty water and wipe it clean with cloth. Dry the jar in a drafty place.
CLEANING & MAINTENANCE
Do not immerse motor base or power cords into water or any other liquid.
Use soft cloth or sponge to wipe clean the surface of jar. Remove the measuring cup and seal
ring before proceeding to cleaning.
Rinse the jar with clean water after each use. Or you can add 2 cups of clean water (1 L) into the
jar, secure the lid, and tap button “ ” to clean.
Lay down the jar horizontally in a drafty place or place it upside down to let it dry naturally. Do
not immerse it entirely in water.
Do not rinse motor base with clean water. Use soft cloth to clean instead.
When drying the machine by placing it in an upside-down position, please wipe away
leftover water at the bottom of the jar. Keep it away from the sink in case of any water
dripping into the bottom of the jar and potentially rusting interior key components like
metal bearing.
To thoroughly clean the inside of the jar and leftover dirt on the blades and ensure
durability of jar and blades, it is recommended to add some clean water and lemon into
jar, secure the lid and press button “PULSE” to quick clean for 2-3 times. Pour away
water and repeat the step.

15 GREENIS POWER BLENDER GREENIS POWER BLENDER 16
Attention:
Above are general problems users may encounter and possible solutions they can adopt. For other
problems with the machine, please contact local after-sales for repair purpose. Do not open the
machine and repair by yourself.
TROUBLESHOOTING
PRODUCT SAFETY INSTRUCTIONS

17 REENIS POWER BLENDER GREENIS POWER BLENDER 18
Motor base
Jar
Lid
Measuring cup
Tamper
Blades
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
User manual with other printings
1 unit
1 unit
1 unit
Recipe Book
Power cord with plug
WHAT’S IN THE BOX
PRODUCT SPECIFICATIONS
FGR - 8830
WEEE
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health rom uncontrolled waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. To return your used device, please use the return and collection
system or contact the retailer where the product was purchased, They can take this product
for environment safe recycling.