GREENIS FGR-8880R-1 User manual

POWER BLENDER
FGR-8880R-1-2-4
FGR-8880R-1 FGR-8880R-2 FGR-8880R-4
Ningbo Greenis Home Appliances Co., Ltd
www.greenis.com

01 GREENIS POWER BLENDER
Use Precautsions
TABLE OF CONTENTS
10
13
01
02-03
04-05
06-07
08
09
11-12
Welcome
Safety Precautions
Product Components
How to Use It
Definitions of Buttons under DIY Editing Mode
/ How to Self-program a DIY Recipe
Precautions on Programming Steps of Recipes
Criteria on Ingredients for DIY Recipes
Troubleshooting
16
15
What’s in the Box/Product Specifications
Cleaning & Maintenance
14
Product Safety Instructions
WELCOME
GREENIS POWER BLENDER 02
SAFETY PRECAUTIONS
To ensure that Greenis blender is in proper condition and you can make the most out of it in years
ahead, please take the time to read through the user manual for proper use and better maintenance.
All content in this manual is for reference only and if you find any information unspecified please inform
us for supplementing purpose in next edition. Its design, workings and accessories are subject to change
without warning due to continual product development.
We hope you enjoy the experience with Greenis as it helps you embark on a journey to richer nutrition
and better health!
Please ensure the current, voltage and frequency are in accordance with the standard in your country.
1. The appliance is not to be used by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction.
2. Children should be supervised when they use the appliance and kept from playing with it.
To avoid danger of electric shock, please DO NOT immerse the motor base in water (or any other liquid)
or pour water onto the machine.
Please unplug the machine if it is to be in long-time disuse. Unplug the machine before assembling or
disassembling it.
DO NOT operate the machine if experiencing any malfunction of power cord, power plug or in other
forms. Please contact point of sales（local retailer or distributor）as soon as possible.
It may cause fire, electric shock or human injury if using unauthorized parts & accessories or refitting
machine without authorization.
DO NOT leave the machine unattended when it is in use.
When using the machine please ensure water or any other liquid in the jar does not exceed maximum
scale marked on the jar surface.
DO NOT operate the machine with no ingredient or water inside the jar.
Please keep the machine away from intense heat. DO NOT place it on a cloth in case of damage to parts.
This product is intended for indoor use only.
DO NOT use the appliance for more than 30 minutes continuously as the motor may burn out. Use it
again until the appliance has cooled down.（To prolong the service life of the product, please pause for
45 minutes to let the motor cool down after the use.）
Important Notice:
To ensure safety please read through the manual before using and keep the
manual where it is easily accessible. This product is intended for household
use only and please follow instructions of use and assembly in the manual.

03 GREENIS POWER BLENDER GREENIS POWER BLENDER 04
SAFETY PRECAUTIONS
Warning!
Electric Shock !
DO NOT use plug adapter or extension cord.
Attention: Failure to follow safety and use instructions shall void the product warranty and
may cause severe damages or injuries.
PRODUCT COMPONENTS
01.
01.
02.
02.
03.
03.
04.
04.
07.
07.
08.
08.
09.
09.
10.
10.
05.Drive socket
06.Shock-proof pad
06.Shock-proof pad
05.Drive socket
Be careful when handing the sharp cutting blades, emptying the jar and during cleaning.
Be careful if hot liquid is poured into the blender as it can be ejected out of the appliance due to a sudden
steaming.
Switch off the appliance and disconnect from supply before changing accessories or approaching parts that
move in use.
Please secure the lid and measuring cup in place before use. Do secure the lid when making hot drinks
(soups) and start with low speed as otherwise high speed may lead to liquids splashing to cause injuries.
The motor will automatically stop when encountering work overload as the interior temperature detection
system is activated to protect the machine from risk of burning out. It can only get back to work after
cooling off for 45 minutes.
The product is fitted with sharp blades. Please be careful when cleaning. Do avoid contact with any moving
part.
The product is fitted with tamper and please ensure you use the tamper when the lid is secured on the jar.
DO NOT place any other implement like spoons, forks and knives into the jar as they may cause damage to
blades and other parts.

05 GREENIS POWER BLENDER GREENIS POWER BLENDER 06
PRODUCT COMPONENTS HOW TO USE IT
Child Lock
Rotary Dial
“ ”
“ ”
“ ”
“ ”
Tap Start/Stop button to start or stop cycles.
Speed On/off
Child lock
Pulse/Clean
Rotary dial
Time -
Speed indicator
5 Pre-programmed settings
Time display
Time+
DIY setting
Bluetooth setting
Rotate the dial clockwise to speed up and anticlockwise to slow down.
It has 15 variable speeds. Around the rim of control panel are 15 indicator lights that
correspond to 15 speeds and each individual light circle around as dial is rotated to
indicate working speed.
The Bluetooth function will only work when connected to mobile phone.
The Bluetooth icon will be flashing before connection and be normally on during connection.
Please refer to separate Bluetooth instruction card for detailed user information.
Hold "Bluetooth" button for 3 seconds to turn off Bluetooth function.
Then hold "Bluetooth" button for 3 seconds to turn on Bluetooth function.
The “Child Lock” light will be flickering when the touch control panel is locked to
prevent unintended operations.
Hold “Child Lock” button for 3 seconds to unlock the touch control panel.
Then hold "Child lock" button for 3 seconds to lock touch control panel.
The control panel will get automatically locked if without being operated for 3
minutes.
Tips: Bluetooth connectivity for app control is currently optional. Therefore other than
Bluetooth option is Ice Cubes program in place.

07 GREENIS POWER BLENDER GREENIS POWER BLENDER 08
HOW TO USE IT
Icon
Ice Cubes
Smoothie
Hot drinks
Sauce
Grind
Juice
9-12 Ice cubes
150g Fresh sliced pineapple
500g Ice grains
300ml Pineapple juice
150 g soaked soybeans (for better flavour
soaked in boiling water for 0.5 h in
advance)
500 g Salted peanuts (tamper required)
450 g Dry corn (maize)
(The jar should be dry and waterless
when grinding)
1/4 Cucumber 1 Celery 1 Apple
600 ml water 9 Ice cube
Cycle Recipe
DEFINITIONS OF BUTTONS UNDER
DIY EDITING MODE
HOW TO SELF-PROGRAM & RUN A DIY RECIPE:
Tips: Bluetooth connectivity for app control is currently optional. Therefore other
than Bluetooth option is Ice Cubes program in place.
A recipe program normally consists of several steps to which individual speed and time is
corresponded.
Tap and hold DIY button for 2 seconds to enter editing mode whilst the display shows “DIY”. To edit
1st step (while display shows“S1”). Rotate the speed control dial to select desired speed, And tap“ +
“and” - “to set desired time.Tap “ ” button to save the 1st step whilst display shows “S. 01” to
indicate success of step 1 being programmed. Moving to the following steps, such operation method
applies to every step of the way. Each step (S1,S2,S3...) must be saved by tapping “ ”button. The
recipe program is composed of no more than 18 steps.
After all steps are programmed into DIY button, tap COMPLETE “ ”to save the entire program.
Then the machine will stand by with DIY cycle automatically selected. Tap power button to run the
cycle which has been programmed.
As other buttons of cycles,tap DIY and power button to start running DIY cycle.
Unlock “Child lock” and select desired pre-programmed cycle. Tapping “ “ the unit will start working as
per selected cycle and the time display on touch control panel will show count-down time. The machine will
automatically stop once the count-down time ticks to zero and the cycle is completed.
(Tap “ ” to stop during the process.)

It is essential to tap SAVE “ ” button to save current step when programming each step.
If a program is merely 1 step,tapping COMPLETE “ ” will save the program which eliminates the use of
SAVE“ ”button.
A recipe that has been validly programmed will replace previous DIY program.
The machine may beep to indicate of failure if any programming goes wrong. Such failure does not affect or
replace existing recipe program.
To ensure its long service life, the machine is preset at the workload of no more than 30 minutes working
continuously.
The machine will verify the duration of new program is no longer than 15 minutes. Otherwise programming
fails whilst the machine beeps twice to indicate failure.
A recipe program is composed of 18 steps at most. The display will show “FULL” to indicate the full limit for
steps.(The 18th step is still programmable but adding extra step is impossible)
For easier use,the 1st step is forbidden to be at speed “0”. (A failure to set speed other than “0” will disable
1st step to be saved.)
Default recipe for DIY button is ICE CRUSH.
If the last step fails to be saved without tapping SAVE “ ” button when programming multiple steps, the
program will only include previous steps excluding the last step after tapping COMPLETE “ ”.
Under DIY editing mode a continuous no-operation for 30 seconds will dim the display. A continuous no-op-
eration for 3 minutes will exit DIY editing mode. The steps that have been programmed will not be saved.
Under DIY editing mode removing the jar will turn off the machine meanwhile exiting editing mode.
A valid DIY program will be stored into memory of the machine and last for 20 years whether machine is
connected to power or not.
Repeatable read-write cycles for DIY programming are 100,000 times.
09 GREENIS POWER BLENDER GREENIS POWER BLENDER 10
PRECAUTIONS ON PROGRAMMING
STEPS OF RECIPE:
CRITERIA ON INGREDIENTS FOR DIY RECIPE:
(1) For speed 1-7 applicable ingredients are roots and leaves of vegetables, fruits and
the like. The adequate proportion for ingredients and water is 2:3. Ensure that the
volume does not exceed maximum scale 2000 ml of the jar.
(2) For speed 8-15 applicable ingredients are ice cubes no more than 200 ml (individu-
al ice cube size no larger than 20*20 mm) or nuts no more than 250 g. Water should
not be added into the jar when grinding nuts.
Tips: DIY program is suitable for fruit and vegetables only. It does not apply to overly
thick ingredients. The DIY program is composed of no more than 18 steps.The continu-
ous working time for DIY program is no longer than 15 minutes.
Attention: above criteria apply for ingredients added into the jar under Pulse mode or
when rotating dial to operate the machine.

It is essential to tap SAVE “ ” button to save current step when programming each step.
If a program is merely 1 step,tapping COMPLETE “ ” will save the program which eliminates the use of
SAVE“ ”button.
A recipe that has been validly programmed will replace previous DIY program.
The machine may beep to indicate of failure if any programming goes wrong. Such failure does not affect or
replace existing recipe program.
To ensure its long service life, the machine is preset at the workload of no more than 30 minutes working
continuously.
The machine will verify the duration of new program is no longer than 15 minutes. Otherwise programming
fails whilst the machine beeps twice to indicate failure.
A recipe program is composed of 18 steps at most. The display will show “FULL” to indicate the full limit for
steps.(The 18th step is still programmable but adding extra step is impossible)
For easier use,the 1st step is forbidden to be at speed “0”. (A failure to set speed other than “0” will disable
1st step to be saved.)
Default recipe for DIY button is ICE CRUSH.
If the last step fails to be saved without tapping SAVE “ ” button when programming multiple steps, the
program will only include previous steps excluding the last step after tapping COMPLETE “ ”.
Under DIY editing mode a continuous no-operation for 30 seconds will dim the display. A continuous no-op-
eration for 3 minutes will exit DIY editing mode. The steps that have been programmed will not be saved.
Under DIY editing mode removing the jar will turn off the machine meanwhile exiting editing mode.
A valid DIY program will be stored into memory of the machine and last for 20 years whether machine is
connected to power or not.
Repeatable read-write cycles for DIY programming are 100,000 times.
Warning!
11 GREENIS POWER BLENDER GREENIS POWER BLENDER 12
Other important precautions：
USE PRECAUTIONS
USE PRECAUTIONS
About measuring cup, lid and seal ring：
Rotating Blades Can Cause Severe Injury.
DO NOT put hands, spatulas, utensils, etc. into the jar while the blender is running or while the jar
is on the base.
Different tampers and lids match with different jar styles, types and sizes. Use the tamper that is
supplied with your jar and blender.
Place the measuring cup onto the lid (place measuring cup through the central opening of lid
and twist clockwise to fasten) and place the lid onto the jar securely.
Make sure that the machine is not running before putting the tamper.
The seal ring around the lid is detachable. When cleaning remove seal ring from the lid to
thoroughly clean away residues stuck inside the seal ring and the lid.
Stirring ingredient that is fermentative or dry (little water content) for a long time may cause over-heating
and thus trigger overheating protection mechanism built inside the motor. Therefore please start with low
speed and change to high speed if the ingredients are thick or rather dry. If it's still difficult to stir, please
shut down the power, reduce amount of ingredients or add liquid to decrease viscosity.
The motor will stop working when overheated. Unplug the blender and cool down the motor for 45
minutes in a drafty place or in front of a fan.
During the operation, make sure the lid and measuring cup are fastened tightly, in case the food inside
would splash out and cause injuries.
During the operation, DO NOT put hand, any tool (like spoon), or other hard object into the blender jar, in
case of any danger or damage.
When making hot drinks (like soybean milk, rice paste, pottage, etc.), make sure the lid and measuring cup
are fastened tightly, and set the speed from low speed to high speed.
When making sauces (like almond paste, jam, peanut butter or sesame paste, etc.), stuffing, or shell grains,
the volume of ingredients must be among 3 cups to 5 cups; DO NOT operate continuously for a long time,
in case there will be scorched flavor because of overheating. Too many ingredients may also cause
overload, triggering motor’s over-temperature protection.
Please place liquid and soft ingredients first before hard ones like ice cubes.
DO NOT remove the jar until the blades come to a full stop. Otherwise it may cause damages to drive
socket.
Please stop the machine once smelling any scorching smell. It may be caused by overload of ingredients or
the fact blades and drive socket are not fully engaged.
It is recommended to operate the machine no more than 30 minutes at a time.
Always disconnect the appliance from the supply if it is left unattended and before assembling, disassem-
bling or cleaning.
This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
Make sure the lid is securely placed on the jar if tamper is to be used. Shut down the blender
before placing tamper through the hole of lid, in case of food splashing to cause injures.
DO NOT use other implements to replace the tamper if it is missing, which may otherwise cause
injuries. Please contact local dealer to purchase replacement part.

13 GREENIS POWER BLENDER GREENIS POWER BLENDER 14
Attention:
Warm Prompts:
Simple cleaning:
Attention: DO NOT immerse jar into water
1. Add 750 ml clean water and 1-2 lemon slices, tap button “ ” (running for 1 min 56s).
2. Pour away dirty water and repeat step no.1.
3. Pour away dirty water and wipe it clean with cloth. Dry the jar in a drafty place.
PRODUCT SAFETY INSTRUCTIONS
When drying the machine by placing it in an upside-down position, please wipe away leftover water at the
bottom of the jar. Keep it away from the sink in case of any water dripping into the bottom of the jar and
potentially rusting interior key components like metal bearing.
To thoroughly clean the inside of the jar and leftover dirt on the blades and ensure durability of jar and
blades, it is recommended to add some clean water and lemon into jar, secure the lid and press button
“PULSE” to quick clean for 2-3 times. Pour away water and repeat the step.
Correct way of using tamper
USE PRECAUTIONS
CLEANING & MAINTENANCE
Please ensure the blender is unplugged before cleaning or maintenance.
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or instruction concerning use
of the appliance in a safe way and if they understand the hazards involved.
Children shall not play with the appliance.
DO NOT immerse motor base or power cords into water or any other liquid.
Use soft cloth or sponge to wipe clean the surface of jar. Remove the measuring cup and seal ring before
proceeding to cleaning.
Rinse the jar with clean water after each use. Or you can add 2 cups of clean water (1 L) into the jar, secure
the lid and tap PULSE “ ” to clean.
Lay down the jar horizontally in a drafty place or place it upside down to let it dry naturally. Do not immerse
it entirely in water.
DO NOT rinse motor base with clean water. Use soft cloth to clean instead.
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems
or contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.

15 GREENIS POWER BLENDER GREENIS POWER BLENDER 16
Attention:
Above are general problems users may encounter and possible solutions they can adopt. For other
problems with the machine, please contact local after-sales for repair purpose. DO NOT open the
machine and repair by yourself.
TROUBLESHOOTING WHAT’S IN THE BOX
PRODUCT SPECIFICATIONS
Motor base
Jar set
Lid
Measuring cup
Tamper
Power cord with plug
Seal ring(Spare)
User manual with/without other printings
1 unit
1 set
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
Model
Voltage/Frequency
Rated Power
Product Dimensions
FGR-8880R-1-2-4
See rating label on base of product
1400 W
18.5*19*49cm