GREENIS FGR-8840 User manual

Ningbo Greenis Home Appliances Co., Ltd.
www.greenis.com
POWER BLENDER
FGR-8840

01 GREENIS POWER BLENDER
Cleaning & Maintenance
11-12
14
01
02-04
05-06
07-08
09
10
13
Welcome
Important Safeguards
Product Components
Operating Instructions
Definitions Of Buttons Under DIY Editing Mode
How To Self-program A DIY Recipe
Precautions On Programming Steps Of DIY Recipe / DIY Recipe Instructions
User Precautions
Product Safety Instructions
16 Product Specifications
Troubleshooting
15
GREENIS POWER BLENDER 02
TABLE OF CONTENTS
WELCOME
To familiarize yourself with your new Greenis blender, please take the time to read through this
user manual. All content in this manual is for reference purposes only. Its design, workings and
accessories are subject to change without warning due to continual product development.
We hope you enjoy your experience with Greenis, as you embark on a journey towards richer
nutrition and better health!
IMPORTANT SAFEGUARDS
Read All Instructions.
Please ensure the current, voltage and frequency are in accordance with the standard
in your country.
This appliance is not to be used by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction.
Close supervision is necessary when any appliance is used by or near children.
To avoid danger of electric shock, please DO NOT immerse the motor base in water (or
any other liquid) or pour water onto the machine.
Please unplug the machine if it is to be in long-time disuse. Unplug from outlet when
not in use, before putting on or taking o parts and before cleaning.
Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Contact customer service for
information on examination, repair, or adjustment.
It may cause fire, electric shock or human injury if using unauthorized parts & accesso-
ries or refitting machine without authorization.
DO NOT leave the machine unattended when it is in use.
When using the machine please ensure water or any other liquid in the jar does not
exceed maximum scale marked on the jar surface.
DO NOT operate the machine with no ingredient or water inside the jar.
Please keep the machine away from intense heat. DO NOT place it on a cloth in order
to prevent damage to parts.
To ensure user safety, please read through the manual before use and keep the manual
where it is easily accessible. This product is intended for household use only. Please
follow all operating instructions closely.
This product is intended for indoor use only. Do not use outdoors.
DO NOT use the appliance for more than 30 minutes continuously as the motor may
overheat; if running a long cycle, please pause for 45 minutes to let the motor cool
down after use.
To reduce the risk of injury, never place cutter-assembly blades on base without jar
properly attached.
Blades must be assembled, disassembled and changed by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
The use of attachments, including canning jars, not recommended by the manufactur-
er may cause a risk of injury to persons.
Do not let cord hang over edge of table or counter.
Keep hands and utensils out of container while blending to reduce the risk of severe
injury to persons or damage to the blender. A scraper may be used but must be used
only when the blender is not running.
Be careful when handling the sharp cutting blades, emptying the jar and during cleaning.
Be careful if hot liquid is poured into blender as it can be ejected out of the appliance
due to a sudden steaming.
Switch o the appliance and disconnect from supply before changing accessories or
approaching parts that move in use.
Please secure the lid and measuring cup in place before use. Always operate blender
with cover in place. Do secure the lid when making hot drinks (soups) and start with
low speed as otherwise high speed may lead to liquids splashing to cause injuries.
The motor will automatically stop when encountering work overload as the interior
temperature detection system is activated to protect the machine from risk of burning
out. It can only resume work after cooling o for 45 minutes.
Blades are sharp. Handle carefully. Please be careful when cleaning.
Do avoid contact with any moving part.
The product is fitted with a tamper tool and please ensure you use the tamper tool
when the lid is secured on the jar.
DO NOT place any other implement like spoons, forks and knives into the jar as they
may cause damage to blades and other parts.
Flashing light indicates ready to operate. Avoid inadvertent contact with the touch
screen.

03 GREENIS POWER BLENDER GREENIS POWER BLENDER 04
SAVE THESE INSTRUCTIONS
WARNING:
Electric Shock !
DO NOT use plug adapter or extension cord.
CAUTION:
Failure to follow safety and use instructions shall void the product warranty and
may cause severe damages or injuries.
Read All Instructions.
Please ensure the current, voltage and frequency are in accordance with the standard
in your country.
This appliance is not to be used by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction.
Close supervision is necessary when any appliance is used by or near children.
To avoid danger of electric shock, please DO NOT immerse the motor base in water (or
any other liquid) or pour water onto the machine.
Please unplug the machine if it is to be in long-time disuse. Unplug from outlet when
not in use, before putting on or taking o parts and before cleaning.
Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Contact customer service for
information on examination, repair, or adjustment.
It may cause fire, electric shock or human injury if using unauthorized parts & accesso-
ries or refitting machine without authorization.
DO NOT leave the machine unattended when it is in use.
When using the machine please ensure water or any other liquid in the jar does not
exceed maximum scale marked on the jar surface.
DO NOT operate the machine with no ingredient or water inside the jar.
Please keep the machine away from intense heat. DO NOT place it on a cloth in order
to prevent damage to parts.
This product is intended for indoor use only. Do not use outdoors.
DO NOT use the appliance for more than 30 minutes continuously as the motor may
overheat; if running a long cycle, please pause for 45 minutes to let the motor cool
down after use.
To reduce the risk of injury, never place cutter-assembly blades on base without jar
properly attached.
Blades must be assembled, disassembled and changed by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
The use of attachments, including canning jars, not recommended by the manufactur-
er may cause a risk of injury to persons.
Do not let cord hang over edge of table or counter.
Keep hands and utensils out of container while blending to reduce the risk of severe
injury to persons or damage to the blender. A scraper may be used but must be used
only when the blender is not running.
Be careful when handling the sharp cutting blades, emptying the jar and during cleaning.
Be careful if hot liquid is poured into blender as it can be ejected out of the appliance
due to a sudden steaming.
Switch o the appliance and disconnect from supply before changing accessories or
approaching parts that move in use.
Please secure the lid and measuring cup in place before use. Always operate blender
with cover in place. Do secure the lid when making hot drinks (soups) and start with
low speed as otherwise high speed may lead to liquids splashing to cause injuries.
The motor will automatically stop when encountering work overload as the interior
temperature detection system is activated to protect the machine from risk of burning
out. It can only resume work after cooling o for 45 minutes.
Blades are sharp. Handle carefully. Please be careful when cleaning.
Do avoid contact with any moving part.
The product is fitted with a tamper tool and please ensure you use the tamper tool
when the lid is secured on the jar.
DO NOT place any other implement like spoons, forks and knives into the jar as they
may cause damage to blades and other parts.
Flashing light indicates ready to operate. Avoid inadvertent contact with the touch
screen.

05 GREENIS POWER BLENDER GREENIS POWER BLENDER 06
01.
02.
03.
04.
05.
06.
07.
08.
09.
10.
01
02
03
04
05
06
07
08
09
10
PRODUCT COMPONENTS
Child lock
On/O
Time display
Speed display
Bluetooth status
Rotary dial (speed control)
Pulse button (press to initiate)
DIY programming
Smart Blend programs
Bluetooth on/o
PRODUCT COMPONENTS

07 GREENIS POWER BLENDER GREENIS POWER BLENDER 08
Child Lock
Tap Start/Stop button to start or stop cycles.
“ ”
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
The “Child Lock” light will be flickering when the touch control panel is locked to prevent
unintended operations.
Hold “Child Lock” button for 3 seconds to unlock the touch control panel.
You can hold "Child lock" button again for 3 seconds to manually lock control panel.
Or the control panel will automatically lock again if it is not operated for 1 minute.
The Bluetooth function will only work when connected to a smart phone.
The Bluetooth icon will be flashing before connection and be solid when connected.
Install the Greenis app on your smartphone to connect and download recipe programs.
Hold "Bluetooth" button for 3 seconds to turn o Bluetooth function.
Hold "Bluetooth" button again for 3 seconds to turn Bluetooth function back on.
This dial is used for both speed control and the pulse function.
Turn dial clockwise to increase speed from 1 to 24 and anticlockwise to decrease speed. The
blending cycle will continue until it is switched o.
Press and hold the dial to initiate the pulse function. The blender will run at maximum speed until
the dial is released.
Smart Blend programs
Unlock “Child lock” and select desired smart blend program. Once selected, tap “ ” to start the
program. The time display will show count-down time and the blender will automatically stop
once the count-down reaches zero and the cycle is completed.
Tap “ ” at any time to manually stop the program.
On/Off
Rotary Dial “ ”
Icon Cycle
Sauce
Ice cream
3 tbsp granulated sugar
350g frozen blueberries
Recipe Example

09 GREENIS POWER BLENDER GREENIS POWER BLENDER 10
It is essential to tap the SAVE “ ” button to save each step, otherwise it will not be included in
the final program.
A recipe that has been correctly programmed will replace the previous DIY program.
The machine may beep to indicate an error with the programming. In this case, the existing recipe
program will not be replaced.
Recipe programs are limited to 15 minutes of continuous use, to preserve the motor.
If the recipe program exceeds 15 minutes, then the machine beeps twice to indicate an error.
A recipe program is composed of a maximum of 18 steps. The display will show “FULL” to
indicate the full limit for steps.
DIY editing mode will be exited after 3 minutes without any operation and the steps will not be saved.
Under DIY editing mode, removing the jar will turn o the machine without saving the new program.
A valid DIY program will be stored in the memory of the machine, whether the machine is
connected to power or not.
Speed 1-12 should be used for roots and leaves of vegetables, fruits, etc. Use an ingredient to
water ratio of 2:3. Ensure that the volume does not exceed the maximum fill line (2 L) of the jar.
Speed 13-24 should be used for ice cubes (individual ice cube size no larger than 20*20 mm) or
nuts(no more than 250 g). Water should not be added when grinding nuts.
IMPORTANT:While running the machine either by pressing the PULSE button or rotating the
DIAL, above instructions should also be followed when selecting a proper speed(s) depending
upon the type(s) of ingredients mentioned above in order to preserve blades and motor.
Tips: DIY programming feature is suitable ONLY for common fruits and vegetables that are not
overly thick. A DIY recipe program is composed of a maximum of 18 steps. DIY Recipe programs
are limited to 15 minutes of continuous use, to preserve the motor.
PRECAUTIONS ON PROGRAMMING
STEPS OF DIY RECIPE:
DIY RECIPE INSTRUCTIONS
Start (tap to run DIY program cycle)
Cancel (exit DIY editing mode)
Rotate to set speed
Press dial to switch
between speed setting
and time setting
Press and hold to enter editing mode Save entire program
DEFINITIONS OF BUTTONS UNDER
DIY EDITING MODE
HOW TO SELF-PROGRAM A DIY RECIPE:
A recipe program consists of several steps that vary in terms of speed and time.
Hold the DIY button for 3 seconds to enter DIY editing mode (the display will show “DIY”.) To edit
the 1st step, rotate the dial to select desired speed or time, whichever comes first. Press the dial to
switch between speed setting and time setting. Tap “ ” button to save the 1st step. The
display shows “SAVE 01” to indicate success of step 1 being saved. Repeat this process for each
step. Each step must be saved by tapping the “ ” button. The recipe program can be composed
of up to 18 steps.
After all your desired steps are saved, tap “ ” to save the entire program. Then the machine
will stand by with your DIY cycle automatically selected. Tap the power button “ ” to run the
new DIY program. Your very own Smart Blend program has now been saved. As with other smart
programs, tap the DIY icon and then the “ ” icon to start running the saved program.
Save each step

11 GREENIS POWER BLENDER GREENIS POWER BLENDER 12
WARNING!
Tamper Tool – IMPORTANT!
USER PRECAUTIONS USER PRECAUTIONS
Rotating Blades Can Cause Severe Injury.
DO NOT put hands, spatulas, utensils, etc. into the jar while the blender is running or while the jar
is on the base.
Dierent tampers and lids match with dierent jar styles, types and sizes. Only use the tamper
that is supplied with your jar and blender.
Make sure the lid is securely installed on the jar when using the tamper. Stop the blender before
placing the tamper through the hole in the lid to avoid contents escaping or Injuries.
DO NOT use other implements to replace the tamper if it is missing. Please contact your local
dealer to purchase replacement part.
During operation, DO NOT put your hand, or any other tool (like a spoon or other hard object)
into the blender jar, as this could cause injuries and damage the blender. The blender is suitable
for food ingredients only!
About measuring cup, lid and seal ring：
Place the measuring cup onto the lid (place measuring cup through the central opening of lid and
twist clockwise to fasten) and place the lid onto the jar securely.
Make sure that the machine is not running before putting the tamper.
The seal ring around the lid is detachable. When cleaning remove seal ring from the lid to
thoroughly clean away residues stuck inside the seal ring and the lid.
Other important precautions
Please pull out rotary dial (speed control), tear o screen-protector and then assemble rotary
dial (speed control) properly before using.
Blending dry ingredients for a long time may cause overheating and trigger the thermal protec-
tion mechanism built in the motor. To avoid this, start with low speed and then adjust to higher
speed if the ingredients are very thick or dry. If it’s still a problem, then reduce the amount of
ingredients or add some liquid to decrease viscosity.
The motor will stop working when overloaded to protect the motor, it will work again once
cooled. Should the motor overheat unplug the blender and cool down the motor for 45 minutes
in a cool place or in front of a fan.
While the blender is running, ensure the lid and measuring cup are fastened tightly to avoid
splashing.
DO NOT put hands, spatulas, utensils, etc. into the jar while the blender is running or while the jar
is on the base to reduce the risk of severe injury to persons or damage to the blender.
When making hot drinks, ensure the lid and measuring cup are fastened tightly and start the
speed from low and then to higher speed.
When making sauces (like hummus, jam, peanut butter, sesame paste, etc.), nut butters, or
flours, the volume of ingredients should be between 3 and 5 cups; DO NOT operate continu-
ously for a long period of time, or your ingredients may develop a scorched flavor because of
overheating. Too many ingredients may cause overload and trigger the motor’s thermal
protection.
Place liquid and soft ingredients in the blender before hard ones like ice cubes.
DO NOT remove the jar until the blades come to a complete stop. Removing it sooner may
cause damage to the drive socket.
Stop the machine if there is a scorching smell. It may be caused by overload of ingredients or if
the blades and drive socket are not fully engaged.
It is recommended to operate the machine no more than 10 minutes at a time.

DO NOT immerse the motor base or power cords into water or any other liquid.
Use a soft cloth or sponge to wipe clean the surface of the jar. Remove the measuring cup and seal ring
before proceeding to cleaning.
Rinse the jar with clean water after each use. Or you can add 1 L of clean water into the jar, secure the lid
and press the rotary dial to pulse for a few seconds to clean.
Lay down the jar horizontally or place it upside down to let it dry naturally. Try not to immerse the jar
entirely in water for long periods.
DO NOT rinse the motor base with water. Use soft cloth to clean instead.
13 GREENIS POWER BLENDER GREENIS POWER BLENDER 14
PRODUCT SAFETY INSTRUCTIONSCLEANING & MAINTENANCE
Please ensure the blender is unplugged before cleaning or maintenance.
Attention:
Simple cleaning tip:
When drying the jar by placing it in an upside-down position, wipe away residual water under-
neath the jar. Ensure the base of the jar and metal bearing is dried completely and not exposed
to moisture for long periods.
Add 750ml clean water and 1-2 lemon slices, then run the juice program “ ”.
Pour away dirty water and repeat step no.1 with clean water.
Pour away dirty water and wipe it clean with cloth.

15 GREENIS POWER BLENDER GREENIS POWER BLENDER 16
TROUBLESHOOTING
Model FGR-8840
Voltage/Frequency 120V a.c. 60Hz
Rated Power 1400W
Product Dimensions 22(L)*21(W)*53(H)cm
Above are general problems users may encounter and possible solutions they can adopt.
For any other problems, please contact your local customer service. DO NOT open the
machine and attempt to repair by yourself.
Attention:
PRODUCT SPECIFICATIONS
The unit does not work after being
connected to power (no display on the
control panel).
The jar is not securely placed on the
motor base or the lid is not in place.
Remove the jar or lid and place them properly.
Abnormal noise during the operation.
1. Either the jar or mat is not
correctly assembled. Or food
residue/foreign objects are stuck on
the drive socket.
2. Tamper tool is not used when
blending large chunks of ingredient or
overly thick ones.
1. Switch o the machine and remove the jar. If there are
any foreign objects stuck on the mat or drive socket,
clean them out and place the jar back in position again.
2. Use the tamper supplied with the machine.
Child lock cannot be unlocked. Or
unresponsive touch buttons.
1. Moisture entered motor base when
motor base was cleaned with a wet
cloth or sponge.
2. Two buttons touched simultaneously.
3. Caused by capacitive interference
from other sources.
1. Wipe dry the touch panel.
Let it fully dry in an airy place.
2. Release one button (only touch one button at a time).
3. Unplug the machine. Plug in again and tap “On/O”
button to restart.
The machine suddenly stops during the
operation.
1. The lid is blown out by the food.
2. The power cord comes loose from socket
located on the back of the motor base.
3. The power plug is not properly
inserted in the power outlet.
1. Place the lid back in position and restart the machine.
2. Firmly press the power cord into the socket located
on the back of the motor base.
3. Firmly press power plug into the power outlet to
secure.
Bluetooth cannot be connected.
1. The smartphone’s Bluetooth is not
activated.
2. It is out of range.
1. Try to activate smartphone’s Bluetooth again.
2. Place the smartphone within 3 meters of the machine.
1. The LCD display indicates E1, E2, E3, E4.
E1: motor overheating.
E2: motor is “locked up” (not turning).
E3: motor overloading (over-current).
E4: motor’s speed signal is interfered.
When the LCD display indicates E1, cool o the machine
for 45 minutes.
When the LCD display indicates E2 or E3, remove big
chunks of ingredients that clog the blades. Then chop
big chunks into smaller pieces instead and put them
back into the jar.
When the LCD display indicates E4, re-connect the
machine to power and restart.
Fault Possible Cause Possible Solution

WEEE Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection system or
contact the retailer where the product was purchased, They can take this product for
environment safe recycling.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
“This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the
radiator and your body.”
17 GREENIS POWER BLENDER GREENIS POWER BLENDER 18