GREMSY T1 User manual

QUICK
START

01
02
03
04
05
06
07
08
09
11
10
12
01.
02.
03.
04.
05.
06.
07.
08.
09.
10.
11.
12.
Hyper quick release
Pan motor
Pan adjustment
Roll motor
Roll adjustment
Roll housing
Tilt motor
Tilt top bar
Camera plate
Tilt front- back adjustment
Tilt vertical adjustment
Top camera screw
THE GREMSY T1 OVERVIEW

UNBOXING THE GREMSY T1
01
02
03
A B C D E F G H
04
1. GREMSY T1 GIMBAL 2. HYPER QUICK RELEASE 3. SLIDE CAMERA & CAMERA SCREW
4. GREMSY T1 CABLES & TOOLS
A. Micro USB Cable
B. Power Supply Cable
C. Canlink Cable For Pixhawk
D. Canlink Cable For DJI A3/N3
E. Sbus Cable
F. Auxiliary Cable
G. Canlink Cable For DJI A2/ Naza V2 / Wookong
H. Allen Key Set
x1
x1
x1
x1
x1
x2
x1
x2

HYPER QUICK RELEASE
Using 32mm square M3 pattern to
mount the top part onto the frame or
damping isolator.
Connect Disconnect

HYPER QUICK RELEASE
Using 32mm square M3 pattern to
mount the top part onto the frame or
damping isolator.
Connect Disconnect
MOUNTING THE CAMERA
Use a 1/4”-20 screw to secure the
camera to the camera tray, then
put the camera to the gimbal and
tighten the top bar screw.
Step 1: Tilt axis front-back balance
Please see details on the user’s manual
Step 2: Tilt axis vertical balance
Step 3: Roll axis balance Step 4: Pan axis balance
BALANCING THE CAMERA

STATUS LED INDICATOR
Low Battery
System Error (Motor or IMU)
Calibrating
System Boot
System Ready
Lock Mode
Follow Mode
Remote with Lock Mode
Remote with Follow Mode
Auto-tuning in process
Canlink with Lock Mode
Canlink with Follow Mode
Blink
Solid
Blink
Solid
Blink
Blink
Solid
Blink
Solid
Blink
Blink
Solid
01
02
03
04
05
06
07
08
09
10
11
12
STATE LED STATUS DESCRIPTION

STATUS LED INDICATOR
Low Battery
System Error (Motor or IMU)
Calibrating
System Boot
System Ready
Lock Mode
Follow Mode
Remote with Lock Mode
Remote with Follow Mode
Auto-tuning in process
Canlink with Lock Mode
Canlink with Follow Mode
Blink
Solid
Blink
Solid
Blink
Blink
Solid
Blink
Solid
Blink
Blink
Solid
01
02
03
04
05
06
07
08
09
10
11
12
STATE LED STATUS DESCRIPTION
USING FUNCTION BUTTON
USING MODE CHANNEL ON REMOTE CONTROL
POSITIONS
01
02
03
MODES
Follow mode
Motors ON
Lock mode
Motors ON
Motors OFF
PRESS TIMES
Once time
2 times
3 times
Hold 3 seconds
4 times
MODES
Turn motors ON
Lock mode
Follow mode
Turn motor OFF
Calibrate Gyros

@GREMSYTECH FACEBOOK.COM/GREMSY GREMSY.COM
For more information, visit out website at: gremsy.com/gremsy-t1
For instant support, send us an email to [email protected]
Download Software & Manual gremsy.com Support Software & Manual