Grilla Grills Kamado Cart User manual

Kamado Cart Assembly
1
Handle Grip
Steering Bearing
1/2” Steering Bolt
1/2” Steering Washer
1/2” Steering Locknut
Handle Shoulder Bolt
5/8” Wheel Locknut
5/8” Wheel Bolt
8”x2.5” Wheel
Locking Plugs
5/16” Mounting Bolt Long
5/16” Mounting Bolt Short
5/16” Mounting Nut
Wheel washer
Wheel Caps
Black Strapping
Handle Washer
Handle Nut
[A]
[B]
[C]
[D]
[E]
[F]
[G]
[H]
[I]
[J]
[K]
[L]
[M]
[N]
[O]
[P]
[Q]
[R]
x1
x1
x1
x1
x1
x1
x2
x4
x4
x27
x44
x6
x50
x4
x4
x3
X2
X1
HArdware
Handle
Frame Base
Steering Assembly
Cart Legs
Cart Top
Rear Wheel Bracket
Frame Stiffeners
Cover Panels
Upper/Lower Tray Rests
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
x1
x1
x1
x4
x1
x2
x2
x4
x4
Parts
• 5/16”, 1/2”, 1” Open Ended Wrench
or an adjustable cresent wrench of size
• Allen Wrench
• Small phillips head screw driver
Tools Needed
1 using the long mounting hardware [ k , m ] mount
the rear wheel brackets [ 6 ] to the base [ 2 ].
2 Attach the four cart legs [ 4 ] to the frame
base [ 2 ]. Each leg gets a cover panel [ 8 ]. Secure
with long mounting hardware [ k , m ].
K
M
4
8
2
2
6
6

Kamado Cart Assembly
2
K
M
l
M
5
7
7
3 Set Cart Top [ 5 ] on Cart Legs [ 4 ], secure with long
mounting hardware [ k , m ].
4 Attach frame stiffeners [ 7 ] to cart base [ 2 ].
Use short mounting hardware [ l , m ].
2
4
4
4

Kamado Cart Assembly
3
5 Turn the cart on one end with the
rear wheel bracket ( 6 ) facing up. Mount
the two 8” wheels ( I ) with 5/8” wheel
bolts ( H ) and locknut ( G ) and Wheel
washer ( N ).
6 On the opposite end install the
steering assembly ( 3 ) to the frame
base ( 2 ). Use the steering hardware
( B , C , D , E ).
7 With the steering assembly ( 3 ) on,
mount the two remaining 8” wheels ( I )
with the remaining 5/8” wheel bolts ( H )
thread onto Steering Assembly ( 3 ). Placing
the supplied wheel washers (N) after the
wheel.
Once wheels are in place install wheel caps
(O).
3
C
D
E
B
H
G
N
2
6
6
3

Kamado Cart Assembly
4
K
M
9 Attach the handle grip ( A ) to the handle ( 1 ) and
secure with the Handle Hardware ( F, Q and R ). Make
sure to install the handle ( 1 ) in the upright postion.
8 Attach the upper/lower tray [ 9 ] rests to the cart
legs [ 4 ] and base [ 2 ].
9
9
1
A
F
2
R
Q

Kamado Cart Assembly
5
12 Push Plugs [ j ] into open holes
around cart
11 Loosen banding around grill and insert
strapping. secure Kamado Grill with Black
Strapping [ p ].
10 Set Kamado Grill in Cart Top. Position
accordingly. Ensure vent holes are clear
from obstruction.