GrillChef pedestal bbq User manual

7
GRILLCHEF
Assembly and operating instructions for "Pedestal BBQ"
t
General safety precautions
Preface
Please read this assembly and operation manual
carefully before you start using your high-quality
GRILLCHEF barbecue.
You will quickly determine:
How easy and simple the assembly and operation
processes are.
Proper utilisation
The barbeque may only be used for preparing suitable
foods. All requirements of this assembly and operation
manual must be complied with.
Only for private use!
Safe operation of the barbecue
Before using the barbecue for the rst time, it
should be heated with fuel (charcoal or briquet)
for approximately 30 minutes.
WARNING - risk of burning!
➱The barbecue must be positioned on a stable and secure surface when it is in use, otherwise it may tip
over.
➱CAUTION! This barbecue becomes very hot and should not be moved while it is being used!
➱Wear oven gloves or use grilling tongs when barbecuing .
➱Allow the barbecue to cool down completely before cleaning it.
➱CAUTION! Do not use any spirits or petrol to ignite or re-ignite the re!
➱CAUTION! Only use relighters that correspond to the European Standard for relighters (EN 1860-3)!
➱Never use water to extinguish the charcoal.
WARNING - risk of suocation!
➱Do not use in enclosed areas!
DANGER to children and pets!
➱Never leave the hot barbecue unattended.
➱WARNING! Keep children and pets at a safe distance!

8GRILLCHEF
General information for successful
assembly
Please read the assembly instructions carefully and
follow the safety precautions. Allow sucient time
for assembly. Before starting assembly, clear an
area measuring approximately two to three square
metres. Remove the item from the packaging! Lay out
all of the parts and any necessary tools so that they
are within easy reach.
Please note: Only tighten all of the screw connections
rmly when you have nished assembly. Otherwise
this can result in unwanted tension.
Parts List
A: Wind shield 1
B: Cooking grill 1
C: Wooden handle for cooking gril 2
D: Charcoal grid 1
E: -
F: Fire bowl 1
G: Pedestal, back 1
H: Pedestal, front 1
I: Ash catcher 1
J: Base 1
K: Air vent 1
Preparing assembly
Please check to make sure that all of the components
have been supplied using the following list and
drawing. Lay out all of the parts and any necessary
tools so that they are ready for assembly.
Connection elements
(pre-assembled connecting elements are included in the itemisation!)
M5x25
2x
M5x10
18x
M5
17x
M5
1x

9
GRILLCHEF
Assembly
The barbecue must be positioned on a stable and
secure surface when it is in use.
Do not use in enclosed areas or on covered
areas.
Only use safe lighting materials (such as
LANDMANN solid relighters).
The fuel container has a capacity of approx. 1,5 kg.
Before using the barbecue for the rst time, it
should be heated with fuel (charcoal or briquet) for
approximately 30 minutes.
Information for safe operation of the
barbecue
CAUTION!
For your safety the screw heads should always
point outwards, otherwise there is a risk of
injury.
Only tighten all of the screw connections rmly
when you have nished assembly otherwise it
can result in undesired material stress.
1. Install the air vent (K) from the outside at
the pedestal front (H) using M5x10 bolt and
M5 lock nut. Screw the pedestals (G + H)
together with M5x10 screws and M5 nuts.
Note: All screws must be tightened rmly.
2. Fix the pedestals (G + H) on the base (J) using
M5x10 bolts and M5 nuts.
3. Fasten re bowl (F) to pedestals (G + H) using
M5x10 bolts and nuts M5.
4. Fasten wind shield (A) to the re bowl (F) using
M5x10 bolts and nuts M5.
5. Place charcoal grid (D) into the re bowl (F).
6. Insert ash catcher (I) into the pedestals (G + H).
7. Place cooking grill (B) into position of the
windshield (A).
WARNING!
The barbecue must be positioned on a stable
and secure surface when it is in use, otherwise
it may tip over.

10 GRILLCHEF
Igniting the fuel
WARNING - risk of burning!
When petrol or white spirits are ignited
uncontrollable heat can develop as a result
of deagration. You should therefore only
use harmless fuel, such as relighters. The
barbecue must be positioned on a stable and
secure surface when it is in use.
1. Use quality products from LANDMANN,
such as LANDMANN charcoal,
LANDMANN briquettes and
LANDMANN solid relighters.
2. Stack some of the charcoal or briquettes in the
re bowl (F).
3. Ignite one or two solid relighters using a long
match. Place these relighters on top of the
layer of charcoal or briquettes.
4. Allow the solid relighters to burn for 2 to 4
minutes. Then ll the re bowl (F) slowly with
charcoal or briquettes.
5. Only start to cook the food when the fuel is
coated with a layer of ash! This indicates that
the optimal grilling condition has been reached.
Distribute the fuel evenly in the re bowl (F)
using a suitable metal tool.
6. Insert the greased grill and then you can start
barbecuing.
Cleaning / care
WARNING - risk of burning!
Allow the barbecue to cool down completely
before cleaning it. Never use water to quench
the hot barbecue. This could result in burning
or scalding.
Occasional cleaning is necessary to preserve the
beautiful appearance of the barbecue. Do not use any
scouring agents.
1. This Barbecue is made of stainless steel SS 430.
In certain extreme environments, such as salty air,
acid rain and others, surface staining may occur.
To avoid such staining, we recommend the
barbecue to be stored under a weatherproof
cover or indoors in a garage etc..
2. A rinsing cloth and some water with a
commercial detergent is sucient for the
normal cleaning process.
3. Clean the grill using some washing-up liquid
and a rust proof cleaning pad.
Environmental Protection & Disposal
Pay attention to cleanliness when using the barbecue
and dispose of waste in a clean and safe manner. As
a general rule, only dispose of waste in designated
metal or non-ammable containers.
The local regulations for disposal apply.