Grizzly G0601 User manual


WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

MODEL G0442/G0601
5 HP CYCLONE DUST
COLLECTOR
OWNER'S MANUAL
(For models manufactured since 03/12)

This manual provides critical safety instructions on the proper setup,
operation, maintenance, and service of this machine/tool. Save this
document, refer to it often, and use it to instruct other operators.
Failure to read, understand and follow the instructions in this manual
may result in fire or serious personal injury—including amputation,
electrocution, or death.
The owner of this machine/tool is solely responsible for its safe use.
This responsibility includes but is not limited to proper installation in
a safe environment, personnel training and usage authorization,
proper inspection and maintenance, manual availability and compre-
hension, application of safety devices, cutting/sanding/grinding tool
integrity, and the usage of personal protective equipment.
The manufacturer will not be held liable for injury or property damage
from negligence, improper training, machine modifications or misuse.
Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to the State
of California to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement and other masonry products.
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
Work in a well ventilated area, and work with approved safety equip-
ment, such as those dust masks that are specially designed to filter
out microscopic particles.

Table of Contents
INTRODUCTION............................................... 2
 
 
 
 
 
 
SECTION 1: SAFETY....................................... 8
 
 
SECTION 2: POWER SUPPLY ...................... 11
 
 
 
 
 
 
 
 
 
 
 
SECTION 3: SETUP ....................................... 15
 
 
 
 
 
 
 
 
 
 
 
 
 
SECTION 4: DESIGNING THE SYSTEM....... 31
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SECTION 5: OPERATIONS ........................... 40
 
 
 
SECTION 6: ACCESSORIES......................... 42
SECTION 7: MAINTENANCE......................... 44
 
 
 
 
 
SECTION 8: SERVICE ................................... 47
 
SECTION 9: WIRING...................................... 49
 
 
 
SECTION 10: PARTS..................................... 52
 
WARRANTY AND RETURNS ........................ 57

 
INTRODUCTION
Machine Description
We stand behind our machines. If you have
any questions or need help, use the information
below to contact us. Before contacting, please get
the serial number and manufacture date of your
machine. This will help us help you faster.
Grizzly Technical Support
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: [phone]
Email: [email protected]
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: [email protected]
Contact Info
We are proud to offer this manual with your new
machine! We've made every effort to be exact
with the instructions, specifications, drawings,
and photographs of the machine we used when
writing this manual. However, sometimes we still
make an occasional mistake.
Also, owing to our policy of continuous improve-
ment, your machine may not exactly match the
manual. If you find this to be the case, and the dif-
ference between the manual and machine leaves
you in doubt, check our website for the latest
manual update or call technical support for help.
Before calling, find the manufacture date of your
machine by looking at the date stamped into the
machine ID label (see below). This will help us
determine if the manual version you received
matches the manufacture date of your machine.
For your convenience, we post all available man-
uals and manual updates for free on our website
at www.grizzly.com. Any updates to your model
of machine will be reflected in these documents
as soon as they are complete.
Manufacture Date
of Your Machine
Manual Accuracy
      
      

      


        








 
Identification
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
Figure 1.




















 
The information contained herein is deemed accurate as of 5/8/2012 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2Model G0442
MACHINE DATA
SHEET
Customer Service #: [phone] · To Order Call: [phone] · Fax #: [phone]
MODEL G0442 5 HP CYCLONE DUST COLLECTOR
Product Dimensions:
Weight.............................................................................................................................................................. 517 lbs.
Width (side-to-side) x Depth (front-to-back) x Height............................................................. 63 x 56-7/8 x 111-1/2 in.
Footprint (Length x Width)..................................................................................................................... 63 x 56-7/8 in.
Shipping Dimensions:
Carton #1
Type................................................................................................................................................... Cardboard
Content................................................................................................................................................. Machine
Weight.................................................................................................................................................... 446 lbs.
Length x Width x Height............................................................................................................. 61 x 30 x 37 in.
Carton #2
Type................................................................................................................................................... Cardboard
Content...................................................................................................................................................... Stand
Weight...................................................................................................................................................... 88 lbs.
Length x Width x Height............................................................................................................... 41 x 15 x 8 in.
Carton #3
Type................................................................................................................................................... Cardboard
Content.................................................................................................................................................. Canister
Weight...................................................................................................................................................... 55 lbs.
Length x Width x Height............................................................................................................. 48 x 23 x 23 in.
Carton #4
Type................................................................................................................................................... Cardboard
Content.................................................................................................................................................. Canister
Weight...................................................................................................................................................... 55 lbs.
Length x Width x Height............................................................................................................. 48 x 23 x 23 in.
Electrical:
Power Requirement........................................................................................................... 220V, Single-Phase, 60 Hz
Full-Load Current Rating..................................................................................................................................... 22.4A
Minimum Circuit Size........................................................................................................................................ 40 amp
Switch...................................................................................................... Magnetic with Thermal Overload Protection
Switch Voltage..................................................................................................................................................... 220V
Plug Included........................................................................................................................................................... No
Recommended Plug/Outlet Type..................................................................................... Hardwired w/Locking Switch
Motors:
Main
Type.......................................................................................................................................... TEFC Class "F"
Horsepower................................................................................................................................................ 5 HP
Voltage....................................................................................................................................................... 220V
Prewired..................................................................................................................................................... 220V
Phase....................................................................................................................................................... Single
Amps......................................................................................................................................................... 22.4A
Speed................................................................................................................................................ 3450 RPM
Cycle......................................................................................................................................................... 60 Hz
Number of Speeds............................................................................................................................................ 1
Power Transfer ............................................................................................................................... Direct Drive
Bearings................................................................................................. Shielded and Permanently Lubricated
G0442 Machine Data Sheet

 
The information contained herein is deemed accurate as of 5/8/2012 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 2Model G0442
Main Specifications:
Operation
Dust Collector Type............................................................................................................................... Cyclone
Filter Type............................................................................................................................... Pleated Cartridge
Airflow Capacity.......................................................................................................... 2184 CFM @ 1.9 in. S.P.
Max Static Pressure................................................................................................................................ 14.0 in.
Main Inlet Size........................................................................................................................................... 10 in.
Canister Filtration......................................................................................................................... 0.2 - 2 micron
Bag Information
No of Lower Bags............................................................................................................................................. 2
Canister Information
No of Canister Filters........................................................................................................................................ 2
Canister Filter Diameter................................................................................................................... 19-11/16 in.
Canister Filter Length.......................................................................................................................... 39-3/8 in.
Filter Surface Area....................................................................................................................... 226 square ft.
Collection Drum Size.......................................................................................................................... 55 gallons
Impeller Information
Impeller Type...................................................................................................................................... Radial Fin
Impeller Size.............................................................................................................................................. 16 in.
Construction
Lower Bag...................................................................................................................................... Clear Plastic
Canister............................................................................................................................ Spun Bond Polyester
Base.......................................................................................................................................... 14 Gauge Steel
Frame........................................................................................................................................ 14 Gauge Steel
Impeller........................................................................................................................................ Steel, Riveted
Blower Housing......................................................................................................................... 11 Gauge Steel
Body.......................................................................................................................................... 14 Gauge Steel
Collection Drum..................................................................................................................................... Steel
Other Specifications:
Country Of Origin ............................................................................................................................................. Taiwan
Warranty ........................................................................................................................................................... 1 Year
Serial Number Location .................................................................................................................. Grizzly Data Plate
Customer Assembly & Setup Time .................................................................................................................. 4 hours
Sound Rating .............................................................................................................................................. 83 - 86 dB
Features:
Reinforced Intake
Clear Disposable Plastic Collection Bags
Gentle Brush Cleaning Mechanism Inside Cartridge Filter
Remote Control with Programmable Timer
Casters Mounted on Collection Drum for Easy Moving
Blower and Barrel Rotate 360 degrees for Inlet and Outlet Positioning
BIA Certified Cartridge Filter
Reinforced Motor Mount
Wall Mountable Blower Design
Stand Included

 
The information contained herein is deemed accurate as of 4/23/2012 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 3Model G0601
MACHINE DATA
SHEET
Customer Service #: [phone] · To Order Call: [phone] · Fax #: [phone]
MODEL G0601 5 HP 3-PHASE CYCLONE DUST COLLECTOR
Product Dimensions:
Weight.............................................................................................................................................................. 517 lbs.
Width (side-to-side) x Depth (front-to-back) x Height............................................................. 63 x 56-7/8 x 111-1/2 in.
Footprint (Length x Width)..................................................................................................................... 63 x 56-7/8 in.
Shipping Dimensions:
Carton #1
Type................................................................................................................................................... Cardboard
Content................................................................................................................................................. Machine
Weight.................................................................................................................................................... 446 lbs.
Length x Width x Height............................................................................................................. 61 x 30 x 37 in.
Carton #2
Type................................................................................................................................................... Cardboard
Content.................................................................................................................................................. Canister
Weight...................................................................................................................................................... 55 lbs.
Length x Width x Height............................................................................................................. 48 x 23 x 23 in.
Carton #3
Type................................................................................................................................................... Cardboard
Content.................................................................................................................................................. Canister
Weight...................................................................................................................................................... 55 lbs.
Length x Width x Height............................................................................................................. 48 x 23 x 23 in.
Carton #4
Type................................................................................................................................................... Cardboard
Content...................................................................................................................................................... Stand
Weight...................................................................................................................................................... 89 lbs.
Length x Width x Height............................................................................................................... 41 x 15 x 7 in.
Electrical:
Power Requirement..................................................................................................... 220V or 440V, 3-phase, 60 Hz
Full-Load Current Rating................................................................................................. 13.7A at 220V; 6.9A at 440V
Minimum Circuit Size.......................................................................................................... 30A at 220V; 20A at 440V
Switch...................................................................................................... Magnetic with Thermal Overload Protection
Switch Voltage........................................................................................................................... 220V (440V Optional)
Recommended Plug/Outlet Type....................................................................................... Hardwire w/Locking Switch
Voltage Conversion Kit.............................................................................................................................. G440V0601
Recommended Phase Converter...................................................................... Rotary Only (Not Approved for Static)
G0601 Machine Data Sheet

 
The information contained herein is deemed accurate as of 4/23/2012 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 3Model G0601
Motors:
Main
Type..................................................................................................................................................... Class "F"
Horsepower................................................................................................................................................ 5 HP
Voltage.............................................................................................................................................. 220V/440V
Prewired..................................................................................................................................................... 220V
Phase.................................................................................................................................................... 3-Phase
Amps..................................................................................................................... 13.7A at 220V; 6.9A at 440V
Speed................................................................................................................................................ 3450 RPM
Cycle......................................................................................................................................................... 60 Hz
Number of Speeds............................................................................................................................................ 1
Power Transfer ............................................................................................................................... Direct Drive
Bearings................................................................................................. Shielded and Permanently Lubricated
Main Specifications:
Operation
Dust Collector Type............................................................................................................................... Cyclone
Filter Type............................................................................................................................... Pleated Cartridge
Airflow Capacity........................................................................................................... 2184 CFM @1.9 in. S.P.
Max Static Pressure................................................................................................................................ 14.0 in.
Main Inlet Size........................................................................................................................................... 10 in.
Canister Filtration......................................................................................................................... 0.2 - 2 micron
Bag Information
No of Lower Bags............................................................................................................................................. 2
Canister Information
No of Canister Filters........................................................................................................................................ 2
Canister Filter Diameter................................................................................................................... 19-11/16 in.
Canister Filter Length.......................................................................................................................... 39-3/8 in.
Filter Surface Area........................................................................................................................ 226 square ft.
Collection Drum Size.......................................................................................................................... 55 gallons
Impeller Information
Impeller Type...................................................................................................................................... Radial Fin
Impeller Size.............................................................................................................................................. 16 in.
Construction
Lower Bag...................................................................................................................................... Clear Plastic
Canister............................................................................................................................ Spun Bond Polyester
Base.......................................................................................................................................... 14 Gauge Steel
Frame........................................................................................................................................ 14 Gauge Steel
Impeller........................................................................................................................................ Steel, Riveted
Blower Housing......................................................................................................................... 11 Gauge Steel
Body.......................................................................................................................................... 14 Gauge Steel
Collection Drum..................................................................................................................................... Steel
Other Specifications:
Country Of Origin ............................................................................................................................................. Taiwan
Warranty ........................................................................................................................................................... 1 Year
Serial Number Location .................................................................................................................................. ID Label
Customer Assembly & Setup Time .................................................................................................................. 3 hours
Sound Rating .............................................................................................................................................. 83 - 86 dB

 
For Your Own Safety, Read Instruction
Manual Before Operating this Machine
The purpose of safety symbols is to attract your attention to possible hazardous conditions.
This manual uses a series of symbols and signal words intended to convey the level of impor-
tance of the safety messages. The progression of symbols is described below. Remember that
safety messages by themselves do not eliminate danger and are not a substitute for proper
accident prevention measures.
WEARING PROPER APPAREL. Do not wear
clothing, apparel, or jewelry that can become
entangled in moving parts. Always tie back or
cover long hair. Wear non-slip footwear to avoid
accidental slips which could cause a loss of work-
piece control.
HEARING PROTECTION. Always wear hear-
ing protection when operating or observing loud
machinery. Extended exposure to this noise
without hearing protection can cause permanent
hearing loss.
MENTAL ALERTNESS. Be mentally alert when
running machinery. Never operate under the
influence of drugs or alcohol, when tired, or when
distracted.
OWNER’S MANUAL. Read and understand
this owner’s manual BEFORE using machine.
Untrained users can be seriously hurt.
EYE PROTECTION. Always wear ANSI-approved
safety glasses or a face shield when operating or
observing machinery to reduce the risk of eye
injury or blindness from flying particles. Everyday
eyeglasses are not approved safety glasses.
HAZARDOUS DUST. Dust created while using
machinery may cause cancer, birth defects, or
long-term respiratory damage. Be aware of dust
hazards associated with each workpiece material,
and always wear a NIOSH-approved respirator to
reduce your risk.
Indicates a potentially hazardous situation which, if not avoided,
MAY result in minor or moderate injury. It may also be used to alert
against unsafe practices.
Indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.
Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
This symbol is used to alert the user to useful information about
proper operation of the machine.
NOTICE
Safety Instructions for Machinery
SECTION 1: SAFETY