Specifications
Operation
1.
2.
ON
3.
MODEL H8175
PROFESSIONAL
PNEUMATIC GLUE GUN
INSTRUCTION SHEET
Figure 1.
INJURY HAZARD!
Always disconnect tool from
air to prevent unexpected
operation during service!
EYE/SKIN BURN HAZARD!
Wear safety glasses and
protective clothing when
using this tool!
DO NOT EXCEED 100 PSI!
Personal injury could
occur.
ELECTRICITY HAZARD!
Electrocution or fire could
result if this tool is not
properly grounded. Do not
remove the ground pin.
4.
5.
Note: When hot, rest the gun with the tip fac-
ing down, as shown in Figure 1, to prevent
melted glue from escaping the chamber and
increasing the risk of fire or personal injury.
6.
Note: Never pull the glue stick out through
the back of the gun or it may damage the
feed mechanism. Cut off the extra portion of
the glue and feed the remainder through the
glue gun.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
