Groz LED 335 User manual

INSTRUCTION MANUAL
S2950, REV A
LED 335
3W COB + 1W LED
Rechargeable Pen Light
3W COB light
produces 160 lumens
for a flooding beam
of light
Outstandingly bright
light COB (chip on
board) technology for
high lumen output per
square inch, giving
super brightness &
illumination
COB light have an
advantage of thermal
resistance & larger
cooling area
1W LED Top
Torch: For focused
illumination
Adjustable Pocket/
Belt Clip: the light
can be directed in the
desired direction with
the help of this 120°
adjustable clip. Also
can be hooked onto a
pocket/Belt for easy
mobility and hands
free operation
Hands Free Use:
Super strong
Magnetic on clip
makes it easy to
mount onto any
metallic surface for
hands free use
CAT NR. ORD NR.
LED/335 55057
RoHS
Light Weight &
Durable Design: light
weight heavy duty
ABS body with rubber
coating is water
resistant and impact
resistant
Complete with 3.7V
800 mAh Lithium-ion
battery for longer life
Micro USB Charging
port protected by
bezel
Supplied with USB
cable 120°
Magnetic Strip
ON/ OFF Button
1W LED
Top Torch
3W COB
Main Light
CHARGING
TIME
2H
LUMEN
MAIN LIGHT
180
TOP LIGHT
65
RUN TIME
2H
USB
CHARGE

www.groz-tools.com
2
SAFETY INFORMATION
• Keep the work area clean and dry. Damp or
wet work areas can result in injury.
• Check for damaged parts and any other
conditions that may aect the operation
of this product. Replaced damaged parts
immediately
• Do not use the lamp in the immediate vicinity
of inflammable materials or gases.
• Only use the accessories included with the
product.
• Keep the lamp out of reach of unauthorized
persons, especially children.
• Do not point the light directly in your own or
any other person’s or animal’s eyes.
• Do not attempt to open the battery
compartment.
PACKAGING CONTENT
NOMENCLATURE
OPERATING INSTRUCTIONS (Refer
“NOMENCLATURE”)
Charging:
• Fully charge the battery before the first use.
• Turn o the light and connect to the supplied
micro USB charger cable.
• Full charging takes about 2 hours.
Operation:
• To switch ON the light press the button at
the front.
• Press the button once for Top Torch
• Press the button twice for Main Light
MAINTENANCE
• Before cleaning the LED, disconnect the USB
cable (if being charged) and allow it to cool
down suciently.
• Clean with a dry or slightly moist, clean, lint
free cloth and a mild detergent if required.
• Do not use cleaners that contain abrasives
or solvents.
• Check the LED for damage before each use.
If the lens is damaged it must be replaced
immediately.
• Clean any dirt from the housing or the
lens immediately, since it could cause
overheating.
DISPOSAL
The components or the used products must
be given to companies that specialize in the
disposal and recycling of industrial waste.
DESCRIPTION QUANTITY
Light 1
USB cable 1
A. 1W LED Top Torch
B. 3W COB Main Light
C. Magnetic Strip
D. ON/ OFF Button
E. Charging Port
A
BC
D
E

3

Groz Engineering Tools (P) Ltd.
Groz Net Industries
Village Kherki Daula, National Highway-8,
Gurugram-122001, Haryana, INDIA
Tel [phone]
Fax [phone]
E-Mail [e-mail]
Url www.groz-tools.com
The GROZ name, GROZ logo and the mark are
trademarks of Groz Engineering Tools (P) Ltd., India