Grundig GUSTB160IV User manual

DIGITAL TV RECORDER
GUSTB160IV
INSTRUCTION MANUAL

1
INDEX
IMPORTANT SAFEGUARDS.................................................................................................2
INTRODUCTION....................................................................................................................3
Electrical Information..............................................................................................................4
Environmental Markings.........................................................................................................5
GETTING STARTED .............................................................................................................5
In The Box..............................................................................................................................5
REMOTE CONTROL & FUNCTIONS ....................................................................................6
REMOTE CONTROL LAYOUT..............................................................................................7
REMOTE LOCATION OF CONTROLS..................................................................................8
YOUR DTR............................................................................................................................9
FRONT PANEL......................................................................................................................9
BACK PANEL ........................................................................................................................9
CONNECTION DIAGRAM ...................................................................................................10
MENU INTERFACE.............................................................................................................11
FIRST TIME INSTALLATION...............................................................................................11
MAIN MENU ........................................................................................................................11
CHANNEL LIST ...................................................................................................................12
NAVIGATING CHANNELS, USING THE CHANNEL LIST ...................................................12
DELETING CHANNELS......................................................................................................12
EDIT CHANNEL NAME........................................................................................................12
ADDING PARENTAL CONTROL TO CHANNELS...............................................................13
CREATING / EDITING FAVOURITE LISTS.........................................................................13
INSTALLATION....................................................................................................................13
AUTOMATIC CHANNEL SCAN...........................................................................................14
MANUAL CHANNEL SCAN .................................................................................................14
FIRST TIME INSTALLATION...............................................................................................15
TIMERS ...............................................................................................................................15
LANGUAGE.........................................................................................................................16
ELECTRONIC PROGRAMME GUIDE (7-DAY-EPG)...........................................................17
MESSAGES.........................................................................................................................21
SPECIFIC FUNCTIONS OF REMOTE CONTROL...............................................................21
RECORDING & PLAYBACK................................................................................................23
TIME SHIFTING (PAUSE LIVE RECORDING)....................................................................25
RECORDINGS LIBRARY.....................................................................................................27
SETUP.................................................................................................................................28
CONFIGURATION...............................................................................................................28
TV TYPE..............................................................................................................................28
TV OUT................................................................................................................................28
VCR OUT.............................................................................................................................28
FAVOURITE MODE.............................................................................................................28
SCAN ENCRYPTED CHANNELS........................................................................................29
DTR UPGRADE - OAD........................................................................................................29
PARENTAL CONTROL........................................................................................................29
MENU LOCK........................................................................................................................29
SET PIN...............................................................................................................................30
TECHNICAL SPECIFICATIONS..........................................................................................31
TROUBLE SHOOTING GUIDE............................................................................................33
IMPORTANT NOTICE:.........................................................................................................34
DIGITAL SWITCHOVER AND YOUR TV EQUIPMENT.......................................................34

2
IMPORTANT SAFEGUARDS
POWER CORD
Do not place the product where a piece of furniture or other heavy object could trap the power cord
(mains lead). Handle the power cord by the plug. Do not pull out the plug by tugging the cord and
never touch the power cord when your hands are wet as this could cause a short circuit or electric
shock. Never make a knot in the cord or tie it with other cords. The power cords should be routed in
such a way that they are not likely to be stepped on. A damaged power cord can cause fire or give you
an electrical shock. Check the power cord periodically to see if it is damaged. If it is damaged, please
ask an approved service agent to replace it.
For your own safety read following instructions carefully before attempting to connect this device to the
mains.
This unit is designed to operate on a 220V-240V AC - 50Hz supply only. Connecting it to other power
sources may damage it. Ensure that the supply corresponds to the information on the rating label on
the bottom of the unit. This DTR may be fitted with a non-rewireable plug. If it is necessary to change
the fuse in a non-rewireable plug, the fuse cover must be refitted. If the fuse cover becomes lost or
damaged, the plug most not be used until a replacement, available from the manufacturer, is
obtained. It is important that the colour of the replacement fuse cover corresponds with the colour
marking on the base of the plug. If the plug needs to be changed because it is not suitable for your
socket, or it becomes damaged, it should be cut off and the fuse removed immediately. Please
dispose of the plug safely and out of reach from children. Under no circumstance should the cut-off
plug be inserted into a mains socket outlet due to high risk of electric shock. Then fit an
appropriate plug carefully following the wiring instructions shown below.
IMPORTANT
The wires in the mains plug should be connected
as shown in the diagram.
The colours of the wires in the mains lead of the unit
may not correspond with the coloured markings
identifying the terminals in your plug. Connect them
as follows:
The wire which is coloured blue must be connected
to the terminal which is marked with the letter ‘N’ or
coloured black.
The wire which is coloured brown must be connected
to the terminal which is marked with the letter ‘L’ or
coloured red.
There should be no connection to earth terminal of
your plug. If you use a 13 Amp (BS1363) plug, you will
need a 5 Amp fuse.
How to replace the fuse
Open the fuse compartment with a blade screwdriver and replace the fuse. When replacing the fuse in
the plug, use ASTA or BSI approved 5 AMP fuse and be sure to re-fit the fuse cover. If the plug
supplied with this equipment has a detachable fuse cover, be sure attach the fuse cover after you
change the fuse. Never use the plug without the fuse cover.
If you should lose the fuse cover, please contact an electrical goods retailer. If in doubt, consult a
competent electrician how to replace the fuse
This symbol means that this unit is double insulated. An earth connection is not required.
CAUTION
To prevent electric shock, disconnect from the mains before removing cover. No user servicable parts
inside. Refer servicing to qualified service personnel. Disconnect from the mains supply before
cleaning.
BLUE
(NEUTRAL)
BROWN
(LIVE)
FUSE
CORD GRIP
OUTER
SLEEVE

3
This DTR has a built in hard disk (abbreviated as HDD) for recording and playback. Beware of the
following points when setting up and using the DTR. Failure to observe precautions may cause
damage to the HDD itself or its content,failure of the disk to operate, or recording of noise.
•Do not subject the DTR to any vibration or impact.
•Do not place the DTR in a cramped location which might block the ventilation port on the back
of the DTR.
•Do not place the DTR in a location with severe temperature variation.
•Do not place the DTR in a location with high humidity.
•Place the DTR horizontally, never at an incline.
•Do not place a magnetic device (magnet etc.) close to the DTR.
•When the power is on, do not unplug the power cord from the AC outlet, turn off the breaker
for the area where the DTR is set up, or move the DTR.
When moving the DTR, first turn off the power and then unplug the power cord from the AC outlet.
INTRODUCTION
Thank you for purchasing this product which has been designed and manufactured to give you many
years of trouble-free service. Before use please ensure that you have read all of the following
instructions.
About This User Guide
This user guide contains all the information you need to know about how to setup, watch and record
available 'Freeview' channels using your DTR.
What is Freeview?
It is the new, free digital service currently providing approximately (depending on location/reception)
30 free digital TV channels, over 20 digital radio stations plus a whole new world of interactive
services. It's broadcast from transmitters and received via a rooftop aerial.
It works like traditional TV, but because the signals are Digital you need a set top box to convert them.
This means more channels can be transmitted with extra features such as interactivity and widescreen
pictures.
Safety is Important
To ensure your safety and the safety of others, please ensure you read the Safety Instructions before
you operate this product.
• Keep this information in a safe place for future reference.
Safety Considerations
Position the cables so that they cannot be walked on or pinched by items placed on or against them.
• Please do not place the set in a place subject to direct sun light, excessive dust or mechanical shock
or in a location near heat sources.
• The set should be placed on a solid and safe base. Do not place the apparatus on a soft surface
such as a rug that might block the ventilation holes on the bottom.
• A location should not be selected such as a room with high humidity, as the condensation, arising in
the kitchen for example, may cause malfunction or damage the set.
• Heating or other thermal radiation under the set also may cause malfunction or damage the set.
• The hot air, which arises during the operation, should be ventilated with sufficient air circulation.
Please do not put the set into closed areas and do not cover it.
• Please avoid the contact with water or humidity. Do not put into operation near bath, sinks, swimming
pools etc.
• Take care to provide a good air circulation. Place the apparatus in a location with adequate
ventilation to prevent heat build-up in the apparatus.
• Should any solid object or liquid fall into the cabinet, unplug the apparatus and have it checked by
qualified personnel before operating it any further.

4
Cleaning
• ALWAYS unplug the DTR before you clean it.
• Do not use liquid or aerosol cleaners.
• Clean the DTR with a soft, damp (not wet) cloth.
Servicing
• There are no user serviceable parts in this DTR.
• When servicing, refer to qualified service personnel.
• Consult your dealer if you are ever in doubt about the installation, operation or safety of this DTR.
Electrical Information
• Read these electrical safety instructions carefully before connecting the adapter to the mains supply.
• This DTR is supplied with an internal mains adapter. There are no user serviceable parts inside and
it does not require any electrical adjustments.
• This DTR is designed to operate on 220V-240V AC 50Hz supply only. Connecting it to any other
power sources may damage the DTR.
• The DTR is designed for indoor use only.
• If the plug attached to the DTR is not suitable for your socket, or becomes damaged please replace
the plug following the wiring instructions given on the first page.
• Periodically inspect the mains cable for damage. Do not use if faults or damage are found. Refer to
qualified personnel.
• Your DTR, as with any electronic equipment, consumes power. In order to reduce power
consumption, please switch the DTR to standby when not in use. If you will not be using the DTR for a
long period of time, we recommend unplugging it from the mains outlet, however please remember
that when disconnected from the mains the unit will not be able to make any timed recordings that
have been set.
This symbol indicates that the DTR is double insulated and does not require an earth
connection
This symbol indicates that the DTR is for indoor use only.
This symbol indicates that the DTR conforms to CE regulations.

5
Environmental Markings
The “Batteries marking symbol“ means used batteries must not be disposed together with
your household waste. Please, inquire about the local regulations regarding disposal of used
batteries. For information: the batteries supplied with your DTR remote do not contain
hazardous substances such as Mercury, Cadmium, or Lead.
The “Material recyclability symbol“ means the package cardboard or user manual paper is
recyclable.
The “Green dot“ affixed on cardboard means that this DTR contains a large number of
materials that can be recycled. If you are disposing of an old product, please take it to a
recycling center.
GETTING STARTED
Remove your DTR carefully from the box, and remove the packaging from each part.
In The Box
Inside your DTR package you should have;
•This user guide
•Quick Start Guide
•Digital terrestrial television DTR (DIGITAL TV RECORDER)
•2 x 1,5 V R-03/AAA
•Remote Control
•Loop through cable
•1 x SCART Lead
If any of these items are damaged or missing, please contact the place where the DTR was
purchased.
WARNING

6
REMOTE CONTROL & FUNCTIONS
First open the battery cover on the underside of the remote control. Insert two batteries (RO3/AAA)
observing the polarities (+/-) indicated on the inside of the battery compartment and put on the battery
cover again. While using the remote control, direct it towards the front of the DTR ensuring that there
are no obstructions in the path between the remote and the DTR. If the remote control does not work
or the chosen function does not work, the batteries are most probably exhausted and they should be
replaced as soon as possible. It is best to remove the batteries from the remote unit if it will not be
used for a long time.

7
REMOTE CONTROL LAYOUT
1
2
3
4
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
27
25
26
24
28
29
31
32
5

8
Using the Remote Control
- To use the remote control, point it towards the front of the DTR.
- The remote control has a range of up to 7 metres from the DTR at an angle of up to 60 degrees.
- The remote control will not operate if its path is blocked.
NOTE: Sunlight or very bright light will decrease the sensitivity of the remote control.
REMOTE LOCATION OF CONTROLS
BUTTON FUNCTION
1. Standby ON / Standby
2. Search Forward
3. LIB. Library of recordings
4. Timers Timer Setup
5. Record key
6. Info I-Bar
7. Direction buttons / OK Navigation / Skip 2 minutes (left/right)
8. Back / Exit Exit
9. P+ / P- Channel Up / Down
10. Yellow Yellow Teletext function key
11. Blue Blue Teletext function key
12. Number keys Numerical keys
13. PP Swap channels (with last viewed channel)
14. Wide TV aspect ratip mode
15. Subt. Show / Hide Subtitles
16. Swap
Swap the channels shown on the PIP window and
normal screen
17. Pip + PIP Window Channel Up
18. Mute Mute
19. Play
20. Search backward
21. Stop
22. Pause / Timeshift
23. Guide Electronic Program Guide
24. Text Display Teletext
25. V+ / V - Volume UP / DOWN
26. Green Green Teletext function key
27. Red Red Teletext function key
28. Aux
Toggle between TV and the input from any equipment
connected to the AUX scart
29. Menu Enter menu / Exit menu
30. Fav Favourite list
31. Pip Show / Hide PIP window
32. PIP- Previous channel in PIP window

9
YOUR DTR
FRONT PANEL
REC
PR
BACK PANEL
1. AERIAL 2 OUT : Aerial loopthrough output - Connect to TV aerial socket.
2. AERIAL 2 IN : Loop through
3. AERIAL 1 OUT : Loop through
4. AERIAL 1 IN : Aerial input
5. RS232 : Factory use only
6. OPTICAL SPDIF : Optical Digital Audio Output
7. DVD/AUX SCART : Input for external equipment such as DVD player etc.
8. TV SCART : TV Scart connection
9. ANALOGUE AUDIO LEFT/RIGHT : Analogue Audio output
10. CVBS :Composite video Output
11. MAINS CABLE : Connect to 220-240V AC, 50 Hz mains electricity
supply
Important Note: It is not possible to record from external equipment connected to the AUX SCART
socket.

10
CONNECTION DIAGRAM
The following diagram shows typical configurations only, and may differ slightly to your existing
external equipment. If you are unsure on how to connect to your DTR, always consult your
manufacturer's user guide supplied with your equipment.
NOTE: This set top box supports Free To View only. There is no provision for a CAM or Pay To View
card. Please note it is not possible to record any input from the DVD/AUX SCART. The DVD/AUX
SCART is only used for loopthrough.

11
MENU INTERFACE
FIRST TIME INSTALLATION
When the DTR is switched on from stand-by mode and if there is no channel stored in the database,
the First Time Installation Menu window is displayed on the screen. In this window, set the TV type
with the “/” keys and press OK to continue.
Automatic channel scan window appears and the unit commences to search for channels.
MAIN MENU
Navigating the on screen display (OSD)
Most of the OSD functions are controlled by the following keys on the remote control:
Up/Down arrow keys Move one item up or down
Left/Right arrow keys Move one item left or right
Change the setting of a configurable item
OK key Confirm the current action
Exit key Close the menu screen
Colour keys These buttons are used for different functions depending on what
OSD is shown on the screen. Please see the I-Bar at the bottom of
each OSD for details.
i-key Show help guide for OSD (where available)
Numerical keys Switch to a specific channel
Enter number values for timers
Enter letters for channel and recordings´ names as follows:
1 - abc
2 - def
3 - ghi
4 - j kl
5 - mno
6 - pqr
7 - stu
8 - vwx
9 - yz
0 - + - * / !
Main menu is accessed by pressing the MENU key on the remote control.
Navigate using the “/” keys and press OK to enter sub-menus. Press
the BACK/EXIT button to return to the previous menu.

12
CHANNEL LIST
The channel list gives a list of channels.
where the the following operations can be
performed :
1. Navigating channels
2. Deleting channels
3. Renaming channels
4. Adding parental controls to channels
5. Creating/Editing favourite list
NAVIGATING CHANNELS, USING THE CHANNEL LIST
Use the “/” keys to highlight the required channel. To view the highlighted channel, press OK key
while the Select option at the bottom of the screen is highlighted. If the selected channel is password
protected then a pop up menu is display, enter the PIN number using the NUMERICAL keys.. If the
correct code is entered, the selected channel will be displayed. The scroll Bar in middle of the screen
shows relative position of the currentlyvisible channels with respect to the whole list.
DELETING CHANNELS
To delete a channel highlight it using “/”, then highlight the “Delete” button using “/” and press
OK. A message is displayed to confirm, if the channel is to be deleted select “YES”, using “/”
buttons or to cancel, select “NO” and press “OK”.
EDIT CHANNEL NAME
To rename a specific channel, highlight the channel and select the "Edit Name" button using the
“/” buttons and press OK. A edit name box is shown on the screen. Use “/” to move to the
previous/next character. “/” cycles the current character, i.e., ‘b’ character becomes ‘a’ after
pressing “”or ‘c’ after pressing “”. Pressing the numerical buttons ‘0...9’ replaces the highlighted
character with the characters printed above the button one by one as the button is pressed (similar to
writing a text message on a mobile phone). To cancel the name edit press the BACK/EXIT key or
press OK to save the new name.

13
ADDING PARENTAL CONTROL TO CHANNELS
Parental control provides a PIN-protected access to channels. To lock a channel, from the channel list
menu highlight the channel to be locked and select the “Lock” button with the “/” keys and press
the OK key on the remote. A PIN entry box will be shown on screen, enter the PIN number using the
numerical keys ( the default PIN number is 0000 and can be changed from the Configuration menu).
Enter the parental Lock PIN, press OK and the Lock icon will be displayed next to the selected
channel. Repeat the same operation to remove the Lock.
CREATING / EDITING FAVOURITE LISTS
Favourite lists provide an easy way to group
programs in a customisable way. Five
favourite lists are available named as List1,
List2, List3, List4 and List5.
¾From the channel list use the “/”
buttons to highlight “Favourites”
button and press OK to enter the
“Favourite Lists” menu.
¾Use the “/”buttons to select the
favourite list to be created/edited
(List1/List2/List3/List4 or List5).
¾Use the (up/down) keys to highlight the channel to be added to the list and press OK. To add
further channels to the list repeat this procedure.
¾Repeat the above steps to remove the channels from the list.
¾Once complete, press MENU to save your settings.
¾Press the FAV key on the remote to cycle through the available favourites list (LIST1 to
LIST5). The PR+ and PR- buttons will cycle through the channels stored in the currently
selected favourites list.
INSTALLATION
The installation menu provides two different channel searches as well as the First Time Installation
feature.In order to access it, press the menu key then select SETUP using the “/” keys and press
OK. From the submenu select Installation using the “/” keys and press OK. Please note that
performing a First Time Installation will delete your channel list and reset every menu setting to its
factory default, however it will not delete recordings already stored on the hard drive.

14
AUTOMATIC CHANNEL SCAN
It is recommended to use the
automatic search if several
channels in your channel list are
no longer being broadcast or if
new channels have become
available. The automatic search
will create a new channel list out
of all available channels and
replace the previous channel
list. As it searches every
available channel, the process may take several minutes to complete.
Automatic channel scan is activated by pressing OK when the Automatic Channel Scan option is
highlighted. A pop-up menu is shown on the screen, select “YES” to start. All the multiplexes are
searched and a channel table is created automatically. All channels found are stored in a sorted form
with respect to their channel numbers. To cancel the scan select "NO" from the pop-up menu.
MANUAL CHANNEL SCAN
The manual search is quicker as the channel number for the multiplex has to be specified and
therefore the DTR only has to tune into the one channel to find stations. However the channel
numbers must be known before attempting this method and therefore this is only designed for more
advanced users. In manual search the UHF channel number of the multiplex is entered manually
and only that multiplex is searched for the channels. In manual and auto search, any existing
channel in the database is not re-stored to avoid redundant duplicates of that channel. To start
the scan enter the channel number manually and press OK.

15
FIRST TIME INSTALLATION
Use this option to load default settings, which had been set at the factory. To install factory settings,
highlight ‘First Time Installation’ menu and press OK key, then you will be asked to confirm deleting all
channels and settings. Selecting YES and pressing OK will delete the channel table. Selecting "NO"
and pressing OK will cancel the operation.
TIMERS
Timers can be used to set recording timer
for a certain channel and time. The
recording will start in background, using the
second tuner allowing continued watching
of a different programme during the
recording.
NOTE: If two timers are set to record over
the same period then only the two channels
used in these timers will be viewable.
In order to set a timer, press the TIMERS
key on the remote (or access via the
TIMERS option on the main menu) and
press the yellow button to add a timer. The
following options then need to be set:
Use “/” keys to navigate to select the below options.
Channel: Use the “3/4” keys to select the channel to record.
Date: Using NUMERICAL KEYS enter the date for the recording
Start: Using NUMERICAL KEYS enter the start time for the recording
End:Using NUMERICAL KEYS enter the end time for the recording
Duration: Displays the duration of the recording. This is automatically calculated after the start and
end times have been entered and cannot be adjusted directly.
Repeat: By using “3” / “4” keys, repeat mode is set to “Once”, “Daily” or “ Weekly”. Using this option,
it is possible to set the timer so that it is repeated "Once", "Daily" (timer will record at the same time
every day), or "Weekly" (timer will record at the same time on the same day every week).
Playback: Change the playback rights for this recording "use parental settings" is default. There are
three possible settings as follows:
"Use parental settings": If this option is selected, playback will follow the parental control settings for
the channel recorded from. i.e. if the channel is locked and therefore requires PIN entry to view, the
recording will require PIN entry to view. If the channel is not locked, PIN entry is not required. (Please
note, changing the parental settings after the recording has been made will not affect the recording.)
"Allowed": Playback of the recording is allowed no matter what the parental settings for the channel
recorded from is set to. If allowed is selected the Enter PIN dialogue will be displayed. Enter the PIN
number using the NUMERICAL keys and press OK.
"Disallowed": PIN entry will be required on playback of this recording.

16
Change /Delete: Allow or do not allow any modifications of this recording. There are two possible
settings as follows:
"Allowed": Users will be able to edit/delete the timer (before recording) and delete the recording once
made without entering PIN number.
"Disallowed": Users must enter PIN before editing/deleting timer (before recording) and when deleting
the recording once made.
When a timer Start time is reached, the DTR starts to record the desired program, then when the end
time is reached, the recording stops. Save the timer by pressing the GREEN key or cancel any
changes made using the RED button. Edit the list via GREEN key and delete with the RED button.
To edit an existing timer highlight that timer in the timer list and press the GREEN key. To delete a
timer from the timer list, highlight that timer in the list and press the RED key.
LANGUAGE
In this menu the user can adjust the preferred language. Language is changed by pressing OK key.
System: shows the language used for all of the menus, on this model this is fixed to English
Preferred
These settings allow the preferred languages to be set for the audio and subtitles. The options set
here will be used for the audio or subtitle language automatically (if the relevant language is being
broadcast).
¾Audio: Use the “/” keys to change the audio language.
¾Subtitle: Use “/” keys to select the preferred language to use for the subtitles if available
when selecting subtitles.
Current
¾Audio: Use the “/” keys to select the audio language from the currently broadcasting
language options.
¾Subtitle: Use “/” keys to select the subtitle language from the currently broadcasting
language options

17
ELECTRONIC PROGRAMME GUIDE (7-DAY-EPG)
Press the GUIDE button to
display the EPG. The 7-day EPG
is able to show the TV
programmes for all channels for
the next 7 days (if the information
is being broadcast by the
different channels). To advance
the day that the information is
shown for press the blue button.
To go back a day press the
yellow button. Only information
for the following 7 days will be
shown. Past programmes will not
be shown.
Use “// /” to navigate
the guide and highlight a
programme. Across the bottom of
the screen there is an info bar showing all the available commands which are listed below.
RED KEY (SHRINK) : Shrink the guide so that the EPG shows more time. This will
result in the information shown being more condensed.
GREEN KEY (EXPAND) : Expand the guide so that less time is shown on the screen.
YELLOW KEY (PREV DAY) : Show the information for the previous day.
BLUE KEY (NEXT DAY) : Show the information for the following day.
INFO KEY (DETAILS) : Show/Hide the information panel for the currently highlighted
programme.
KEY (RECORD) : Set a timer to record the selected programme.
NUMERICAL KEYS (JUMP) : Select a channel to display information for directly using the
numericalkeys.
OK KEY (VIEW / REMINDER) : View the highlighted channel / set the reminder for future
programs
TEXT (SEARCH) : Activate “Search” window.
KEY (PAGE LEFT) : Scroll the page to the left.
KEY (PAGE RIGHT) : Scroll the page to the right.
(NOW) : Return the guide to display the current time.
Important Note: If during a programme there is a break for a news update (or similar) the programme
information in the guide may be split into two parts For example a film may start at 20:00 and finish at
22:00 but at 21:00 there is a news update. The film will therefore be split into two parts, one part for
example 20:00 to 20:59 and the second part may be 21:02 to 22:00. To record the entire film, please
ensure both parts are selected.

18
MULTIPLE TIMER RECORD
It is possible to record or set reminder for two individual events at the same time. If you set more than
two recordings/reminders at the same time, you will see an error message.
In this case, please use the directional keys to select the recording/reminder to cancel and press the
RECORD button (for recordings) or OK button for reminders. Press the GREEN button to save the
changes that you have done.
SEARCH FUNCTION OF THE EPG
Using the search function of the EPG, you are be able to search a programme according to it’s genre
or name. From this list it is possible to set the DTR to record the event. Firstly, press the “GUIDE”
button on your remote control, to display the EPG.

19
With the EPG shown on screen press the TEXT button on the remote control to display the SEARCH
menu.
Search: Indicates the source, where the search should be done. Using the “/”keys, instruct the
DTR where to search for the requested programme. The options are as follows:
Current Channel list: Search only the channels that are listed in the current channel list. For example if
you have activated the favourites mode then this will search only the channels in the currently selected
Favourite list.
Single Channel: Will only search the single channel as specified in the "Channel" option
All Channels: Will search all channels stored on DTR and is not limited by which favourite list is
selected.
All TV channels: Will search the information for all TV channels only
All radio channels: Will search the information for all radio Channels only.
Channel: This option will only be editable, if you select “Single channel” from the “Search” option.
From: Select the first day to start search for the required information.
Until: Select the last day to search for the required information (if this is set to different date as the
From date then all days in between will be searched).
Search by: Select to search by "Genre" (type of programme) or by "Name Match" - Please note, not
all channels may broadcast the Genre information therefore these events may not be listed when
searching by Genre.