Programming FM radio stations –
manually
1Open the menu with »MENU«.
2Confirm the option »TO FM« by pressing
»SELECT/i«.
– Display: »FM«, then the name or the frequency
of the FM radio station.
3Press and hold down »– TUNING« or
»TUNING +« to search the desired radio
station.
– The automatic station search starts, and stops
at the next station with a strong signal;
or
briefly pressing »– TUNING« or »TUNING +«
until you have found the frequency you want.
– The frequency changes in steps of 50 kHz.
4To store the DAB radio station on a preset,
press and hold down the required preset
button »1« to »5«, until »STORED« appears.
Press »+5« and the required preset button »1«
to »5« for presets 6 to 10.
Note:
7
The device normally scans for FM radio
stations which are strong enough to get
good reception. To scan radio stations with
weak signal:
Open the menu with »MENU« and confirm
with »SELECT/i«.
Select the option »DX« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
Setting the clock format
(12 or 24 hours)
1Press »ON/OFF« to switch on the device.
– Display: e.g. »B5 AKT«.
2Open the menu with »MENU«.
3Select the option »SYSTEM« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
4Select the option »TIME« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
– Display: »12/24 HR«.
5Press »SELECT/i« again and select the desired
clock format (12 or 24 hours) by pressing
»– TUNING +«.
6Press »SELECT/i« to confirm setting.
7Press »MENU« to end the setting.
Updating the time – automatically
The device will normally update the time
automatically, when a time signal is received.
You can select from which source (DAB or FM)
the update starts or you can disable this function.
1Press »ON/OFF« to switch on the device.
– Display: e.g. »B5 AKT«.
2Open the menu with »MENU«.
3Select the option »SYSTEM« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
4Select the option »TIME« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
– Display: »12/24 HR«.
5Select the option »UPDATE« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
– Display: »ANY«.
6Select the desired option (Any, DAB or FM) by
pressing »– TUNING +«;or select the option
»NONE«, if you want to disable the update.
7Press »SELECT/i« to confirm setting.
8Press »MENU« to end the setting.