GU Electronic Chrysler-CIP-2014-D User manual

Chrysler-CIP-2014-D
- DATE : 2020.04.24

GU Electronic
Index
1. Main Spec
2. Block Diagram
3. Dimension
4. External Appearance
5. Connector Pin Assignment
6. Product Composition
7. DIP S/W Setting
8. Mode Change
9. OSD(On Screen Display) Control
10. Install Manual
11. Q & A

GU Electronic
1. Main Spec.1. Main Spec.
1. Input Spec. (MULTI VIDEO INTERFACE)
- 1 x Digital RGB Input (Navigation System source)
- 1 x Analog RGB Input (Navigation System output)
- 1 x CVBS(REAR CAMERA) Input. (Rear camera source)
- 1 x CVBS(FRONT CAMERA) Input. (Front camera source)
2. Output Spec.
- 1 x Resistive Analog Touch (Navigation System source)
- 1 x LVDS Output (LCD Operation)
3. Power Spec.
- Input Power : 8VDC ~ 24VDC
- Consumption Power : 12Watt, Max
4. Switch Input mode
- Possible to select CAR model while switching mode by DIP S/W
- By button on the Commander in the car via CAN

GU Electronic
2. Block Diagram2. Block Diagram
Scaler
(PIP)
MCU
LVDS
TX
INTERFACE
CAR
COMMAND
SYSTEM
LVDS
CAN
EEPROM
CAN
RECEIVER
LVDS
TX
REAR CAMERA
POWER
REAR CAMERA
LVDS
LVDS
FRONT CAMERA COMPOSITE
NAVIGATION
SYSTEM
LVDS
RX
CAR
TFT-LCD
SUB
BOARD
RELAY

GU Electronic
3. Dimension
156mm * 83mm * 22mm
* This can change under manufacturer’s circumstance
156mm
83mm
22mm

GU Electronic
4. External Appearance
LED DIP S/W PROGRAM
FRONT
IMAGE
REARNAVIPOWER/CAN
R-TOUCH
Digital
RGB
LCD-OUT

GU Electronic
4. External Appearance
LEDDIP S/W
PROGRAM IMAGE
R-TOUCH
FRONT
REARNAVIPOWER/CAN
Digital
RGB
LCD-OUT

GU Electronic
5. Connector Pin Assignment
*Touch Connect
① Y-
②X-
③Y+
④X+
① ② ③ ④
*NAVI Connect
① R DATA (Red)
②G DATA (Green)
③B DATA (Blue)
④SYNC (White)
⑤GND (Black)
⑥DVB-T-IR (Green)
⑦DVD-IR (Orange)
① ② ③ ④ ⑤ ⑥ ⑦
*POWER Connect
1. Battery (Yellow)
2. Battery (Yellow)
3. CAN-L (Green)
4. CAN-H (Orange)
5. CAN-L (Blue)
6. CAN-H (Red)
7. Rear-VCC (Red)
8. N.C
1 15
2 16
9. Front-VCC (Red)
10. N.C
11. ACC (Red)
12. N.C
13. N.C
14. N.C
15. GND (Black)
16. GND (Black)

GU Electronic
6. Product Composition
Interface 1 EA
Power Cable 1 EA
OSD Board 1 EA
SUB Board 1 EA
FPC Cable 1 EA
LVDS Cable(800mm) 1 EA
RGB Navi Cable 1 EA
Touch 변환 Cable(KD-900) 1 EA

GU Electronic
7. DIP S/W Setting
* ON : DOWN , OFF : UP
PIN FUNCTION DIP S/W Selection
1 NAVI ON : Not Used
OFF : Used
2 N.C
3 N.C
4 N.C
5 N.C
6 N.C
7
CAR type SEL Right Picture
8
* DIP S/W Example
Grand Cherokee (WK) / 2016year 300C
DODGE RAM 2014
Cherokee (KL)
DODGE RAM 2015

GU Electronic
8. Mode Change
mode change : 1ms press

GU Electronic
8. Mode Change
mode change : 0.7ms press

GU Electronic
10. OSD(On Screen Display) Control
OSD control
Mode State
First Menu Second Menu Third Menu
MENU Press to display when there is no OSD
screen.
When OSD screen is on, press it to EXIT or
OFF.
SEL Item Selection, Value Selection
UP Item up
Increase selected value
DOWN Item down
Decrease selected value
MENU SEL UP DOWN

GU Electronic
First Menu Second Menu Third Menu Description
Config
NAVI-RGB DIGTAL-INAVI
:Setting the Connected NAVI Model
Reset Execute Reset to default value of Config menu
OSD Config
10. OSD(On Screen Display) Control

GU Electronic
OSD - Option Menu
First Menu Second Menu Third Menu Description
Option
RearCam-Type OEM Original Camera
ExtDevice Equipped with external camera
RearCam-Power
ON + 12V continuous supply
AUTO + 12V supply only in Rear
camera mode
OFF + 12V off
RearCam-Det GEAR Detected by CAN
WIRE Detected by Rear-Det Wire
AV Mode ON Use “REAR” video input port as
VIDOE input.
OFF Do not use features.
FrontCam-Type OEM Original Camera
ExtDevice Equipped with external camera
FrontCam-Power
ON + 12V continuous supply
AUTO + 12V supply only in Front
camera mode
OFF + 12V off
FrontCam-Det GEAR Detected by CAN
WIRE Detected by Front-Det Wire
FrontCam-RcvOpt ON After RearCam shows FrontCam
and returns to previous state
OFF Disable feature
Back Button ON Switching screen by using “BACK”
button
OFF Disable feature
SteeringWheel Btn
ON Switching screen by using
Steering wheel button
OFF Do not use features.
Reset Execute Option Menu all Reset
10. OSD(On Screen Display) Control

0 second = FrontCam-RcvOpt menu OFF
1~30 second = FrontCam-RcvOpt menu ON & time control
GU Electronic
OSD Option -> FrontCam-RcvOpt
Front Camera Auto Mode
OEM
NAVI
AV1(DVB-T)
AV2(DVD)
REAR FRONT
OEM
NAVI
AV1(DVB-T)
AV2(DVD)
Select time of display
1~30 second
10. OSD(On Screen Display) Control

GU Electronic
Front Camera Manual Mode
10. OSD(On Screen Display) Control
OEM
SCREEN
NAV
SCREEN
Front Camera
SCREEN
Press the “VR” button to switch.
It is automatically switched after 15 seconds,
or it is switched by press the “VR” button.

GU Electronic
First Menu Second Menu Third Menu Action
Image
Brightness Adjust the value of brightness
Contrast Adjust the value of contrast
Color-RED Adjust the value of RED
Color-GREEN Adjust the value of GREEN
Color-BLUE Adjust the value of BLUE
Reset Excute Option Menu all Reset
First Menu Second Menu Third Menu Action
Image
Brightness Adjust the value of brightness
Contrast Adjust the value of contrast
Saturation Adjust the value of Saturation
Hue Adjust the value of Hue
Sharpness Adjust the value of Sharpness
Reset Excute Option Menu all Reset
NAVI-RGB menu
DVD,DVB-T(DMB),NAVI-AV,REAR,FRONT menu
<< Brightness >>
<< Contrast >>
<< Saturation >>
10. OSD(On Screen Display) Control

GU Electronic
OSD – Screen Menu
First Menu Second Menu Third Menu Description
Screen
Horizontal Output screen horizontal
movement
Vertical Output screen vertical
movement
Scale X Up Reduce / increase output
screen width
Scale X Down
Scale Y Up Reduce / Increase Output
Screen Height
Scale Y Down
Reset Screen menu all reset
10. OSD(On Screen Display) Control

GU Electronic
OSD – Parking Menu
First Menu Second Menu Third Menu Description
Parking
Line Display
ON Show Parking lines(Not moving).
OFF Do not show parking lines
OPS Display
ON Please do not use it.
OFF Do not show OPS
Warnings Lang Set warning text language
Horizontal Moving a parking line
horizontally
Vertical Moving a parking line vertically
Transparency Parking line transparency
Reset Parking menu all reset
10. OSD(On Screen Display) Control