GUBI BESTLITE 001-033 Series User manual

Dear BestLite customer,
Congratulaons on your BestLite!
You have chosen a genuine design classic, which
has been in connuous producon for more
than 75 years.
On the other side of this leaet you will nd
some useful instrucons for the use of your
BestLite.
Should you have any quesons, please feel free
to e-mail us at [email protected] or visit us at
www.gubi.com.
Best regards,
BestLite
Technical information:
Light source: CAUTION: TO REDUCE THE RISK OF FIRE, USE MAX. 40 WATT INCANDESCENT, E12,
type b bulb,120V 60Hz AC ONLY. Alternatively max. 30W halogen bulb.
Turn power off when changing light bulb.
The lamp is not approved for outdoor use or use in damp/wet rooms.
Some advice on cleaning your BestLite:
Powder coated parts – base/bracket and shade:
Wipe the parts with a damp cloth soaked in warm water and a bit of mild detergent.
Chrome plated parts:
Wipe the lamp with a damp cloth and wipe dry to bring up lustre.
If the surface is sticky use a metal polish made especially for chromium or other soft metals.
Use only soft cloth for wiping and polishing, never sponges or steel wool.
Do not use abrasive household cleaners.
Do not use acidic or alkaline cleaning materials, glass cleaner or household ammonia.
BESTLITE GUBI, Klubiensvej 7-9, DK-2150, Nordhavn, Denmark www.gubi.com
001-033xx

1: Shade
2: Gasket
3: Internal ring
4: Light bulb
The arm slides on the pole
(The BL 1, BL 3 and BL 5)
The shade tilts (all models except pendant )
The arm bends and swivels
( The BL 1, BL 3, BL 5 and BL 6 -
the BL 2 table model just bends )
The BestLite clip
The BL 1, BL 2, BL3, BL 4, BL 5, BL 6, and BL 10
A practical tool that enables you to fasten
the lamp arm – simply use like a screwdriver
in the slot in the BestLite nut.
1. Unpack the lamp.
2. Place lamp on a stable ground.
3. Plug lamp into the wall socket.
4. Push the switch to turn the lamp on and off.
10-20-003-01 Mounting instr BL 3 US
34
3
4
2
1