GUBI H45 User manual

For enquiries contact GUBI A/S - CVR: 17940384
Klubiensvej 7-9. 2150 Nordhavn. Copenhagen, Denmark
T [phone] – [e-mail]
GUBI.COM
TECHNICAL INFORMATION
Unbound Table Lamp H45: 8,5 Watt LED, dimmable
Unbound Floor Lamp H80: 13 Watt LED, dimmable
Unbound Floor Lamp H120: 20 Watt LED, dimmable
This product contains a light source of energy efficiency class E
The lamp is not approved for oudoor use in damp/wet rooms (IP20)
146-20-001-05 Assembly Manual Unbound
CARE INSTRUCTIONS
TROUBLESHOOTING
Daily cleaning can be done by wiping the frame with a clean dry cloth.
Should the surface need more attention this can be cleaned with water
and a light detergent or soap applied with a damp cloth. Wipe after with
a clean dry cloth. Avoid any abrasive materials.
If lamp does not light, turn off the power, Replacable (LED only) light
source by a professional. If the lamp still does not light, please contact
customer service at the local dealer. If the external flexible cable or cord
of this lamp is damaged, it must be replaced by a qualified electrician
in order to avoid a hazard.

ASSEMBLY INSTRUCTIONS
fo r
Unbound Table Lamp H45
Unbound Floor Lamp H80, H120
For enquiries contact GUBI A/S - CVR: 17940384
Klubiensvej 7-9. 2150 Nordhavn. Copenhagen, Denmark
T+45 69 15 60 60 – [e-mail]
GUBI.COM
Assembly Instructions Unbound
CARE INSTRUCTIONS
Daily cleaning can be done by wiping the frame with a cleandry cloth.
Should the surface need more attention this can be cleaned with water
and a light detergent or soap applied with a damp cloth. Wipe after with
a clean dry cloth. Avoid any abrasive materials.
TROUBLESHOOTING
If lamp does not light, turn off the power. Check the bulb for a broken
filament. Replace bulb if necessary, then turn it on. If the lamp still
does not light, please contact customer service at the local dealer. If
the external flexible cable or cord of this lamp is damaged, it must be
replaced by a qualified electrician in order to avoid a hazard.
TEC HNICA L INF ORMATION
Unbound Table Lamp H45: 8,5 Watt LED, dimmable
Unbound Floor Lamp H80: 13 Watt LED, dimmable
Unbound Floor Lamp H120: 20 Watt LED, dimmable
This product contains a light source of energy efficiency class E
The lamp is not approved for oudoor use in damp/wet rooms (IP20)

ASSEMB LY INSTRUCTIO N S
CONTENTS
1.
2.
3.
Mount theshade by placing the shade bracketonto the the lamparm. Secure the
shade with the mounting screw and cover with shade top.
Align the shapes of the shade and base. At the base of the shade, gently push at
the seam of the shadetowards the lamparm until you can feel the internal bracket
clickaround the lamp arm.
The shade can rotate 360 degrees.
Push theswitch onceto tur n on, push again totur n off. (a)
Hold theswitch to increase light intensity, hold theswitch again todecrease light intensity. (b)
x1 x1 x1
a) b)
ASSEMB LY I NSTRUCTIONS
CONTENTS
x1 x1 x1
1.
2.
3.
a) b)
The shade can rotate 360 degrees.
Push the switch once to turn on, push again toturn off. (a)
Hold the switch to increase light intensity, hold theswitch again todecrease light intensity. (b)
a) b)
d)
c)
e)
Mount the shadebyplacingtheshade bracket ontothethe lamp arm.Secure the
shade with the mounting screw a nd cover with shade top.
a) b) c)
e)d)

ASSEMB LY INSTRUCTIO N S
CONTENTS
1.
2.
3.
Mount theshade by placing the shade bracketonto the the lamparm. Secure the
shade with the mounting screw and cover with shade top.
Align the shapes of the shade and base. At the base of the shade, gently push at
the seam of the shadetowards the lamparm until you can feel the internal bracket
clickaround the lamp arm.
The shade can rotate 360 degrees.
Push theswitch onceto tur n on, push again totur n off. (a)
Hold theswitch to increase light intensity, hold theswitch again todecrease light intensity. (b)
x1 x1 x1
a) b)
ASSEMB LY I NSTRUCTIONS
CONTENTS
x1 x1 x1
1.
2.
3.
a) b)
The shade can rotate 360 degrees.
Push the switch once to turn on, push again toturn off. (a)
Hold the switch to increase light intensity, hold theswitch again todecrease light intensity. (b)
a) b)
d)
c)
e)
Mount the shadebyplacingtheshade bracket ontothethe lamp arm.Secure the
shade with the mounting screw a nd cover with shade top.
a) b) c)
e)d)

3.
Push the switch once to turn on. (a)
Push again to turn off. (b)
a)
b)

4.
Hold the switch to increase light intensity. (a)
Hold the switch again to decrease light intensity. (b)
a)
b)