Gudsen MOZA Mini-P Operation instructions

© 2020 GUDSEN All Rights Reserved.
MOZA Mini-P Expanding & Folding Tutorial
Content
Expanding: Expanding your Mini-P gimbal, please click and follow the steps as shown.
Folding: Folding your Mini-P gimbal, please click and follow the steps as shown.
Expanding
1. As shown in the figures below, loosen slide lock, rotate gimbal 180°anticlockwise, then it locks
automatically.
2. As shown in the figures below, push ejector pad on Roll arm to unlocked position, move Tilt arm
upwards and then fasten Tilt knob.
3. As shown in the figures below, loosen Roll knob, raise Roll arm to keep it out of groove of Pan
motor crash pad, push down Pan motor lock and then you are ready to film now.

© 2020 GUDSEN All Rights Reserved.
Folding
1. As shown in the figures below, adjust Roll arm and insert it to groove of Pan motor crash pad, then
fasten Roll knob.
2. Push ejector pad on Roll arm to unlocked position first, as shown in the figures below, move Tilt
arm backwards to end limit, fasten Tilt knob and then push ejector pad to locked position.
3. As shown in the figure below, rotate Pan arm, place Pan knob at outer side and push up Pan

© 2020 GUDSEN All Rights Reserved.
motor lock.
4. As shown in the figures below, loosen slide lock, rotate gimbal 180°along the direction of slide lock,
then it locks automatically
5. Operation of folding Mini-P is completed.

© 2020 GUDSEN All Rights Reserved.