Guilin woodpecker medical instrument Endomatic User manual

Contents

1 Product introduction.............................................................................. 1

2 Installation ............................................................................................ 4

3 Function and operation of product .................................................... 12

4 Operation instruction ......................................................................... 15

5 Troubleshooting .................................................................................. 30

6 Cleaning, Disinfection and Sterilization............................................. 31

7 Storage, maintenance and transportation ........................................... 34

8 Environmental protection ................................................................... 34

9 After service ....................................................................................... 35

10 Symbol instruction ........................................................................... 35

11 Statement .......................................................................................... 35

12 EMC-Declaration of comformity...................................................... 36

1 Product introduction

1.1 Preface

Guilin Woodpecker Medical Instrument Co., Ltd is a professional

manufacturer researching, developing, and producing dental products.

Woodpecker owns a sound quality control system. Guilin Woodpecker

Medical Instrument Co., Ltd has two brands, Woodpecker and DTE.

Its main products include Ultrasonic Scaler, Curing light, Apex locator,

Ultrasurgery, Endo Motor, etc.

1.2 Product description

EndoMatic is mainly used in Endodontic treatment. It is a cordless

endo motor with root canal measurement capability. It can be used as

a endo motor for preparation and enlargement of root canals, or device

for measuring canal length. It can be used to enlarge the canals while

PRQLWRULQJWKHSRVLWLRQRIWKH¿OHWLSLQVLGHWKHFDQDO

Features:

a)Cordless portable endo motor with combined length determination.

b) Surface insulation of plastic contra angle, built-in electrode of

canal measurement , easy to use.

c) 300 degrees rotation of contra angle.

d) Adopt real-time feedback technology and dynamic torque control,

H൵HFWLYHO\SUHYHQWLQJ¿OHVHSDUDWLRQ

0RGHODQGVSHFL¿FDWLRQ

EndoMatic

3OHDVHUHIHUWRSDFNLQJOLVWIRUGHYLFHFRQ¿JXUDWLRQV

1.4 Performance and composition

The device is composed of charging base, motor handpiece, contra

DQJOHPHDVXULQJZLUHOLSKRRN¿OHFOLSSRZHUDGDSWHUHWF

1.5 Scope of application

1.5.1 The device can be used for preparation and enlargement of root

canals, or device for measuring canal length.

7KHGHYLFHPXVWEHRSHUDWHGLQKRVSLWDODQGFOLQLFE\WKHTXDOL¿HG

dentists.

1.6 Contraindication

Patients with implanted pacemakers (or other electrical equipment)

who are warned not to use household appliances such as electric razors,

hair dryers, etc. are not recommended to use this device.

1.7 Warnings

1.7.1 Please carefully read this Instruction Manual before first

operation.

1.7.2 This device should be operated by professional and qualified

GHQWLVWLQTXDOL¿HGKRVSLWDORUFOLQLF

1.7.3 Do not directly or indirectly place this device near heat source.

Operate and store this device in reliable environment.

1.7.4 This device requires special precautions regarding

electromagnetic compatibility (EMC) and must be in strict accordance

with the EMC information for installation and use. Do not use this

equipment especially in the vicinity of fluorescent lamps, radio

transmitting devices, remote control devices, handheld and mobile high-

frequency communication devices.

1.7.5 Long time use of Reciprocating Motion Mode may result in

motor handpiece overheat, thus it should be left to cool for use. If the

motor handpiece is overheated frequently, please contact local distributor.

1.7.6 Please use the original contra angle. Otherwise it will not be

used or cause adverse consequences.

1.7.7 Please do not make any changes to the device. Any changes

may violate safety regulations, causing harm to the patient. There will be

QRSURPLVHVRIDQ\PRGL¿FDWLRQ

1.7.8 Please use original power adapter. Other power adapter will

result in damage to lithium battery and control circuit.

1.7.9 The motor handpiece cannot be autoclaved. Use disinfectant of

neutral pH value or ethyl alcohol to wipe its surface.

1.7.10 Before the contra angle stopping rotating, do not press the

push cover of contra angle. Otherwise the contra angle will be broken.

1.7.11 Before the motor handpiece stopping rotating, do not remove

the contra angle. Otherwise the contra angle and the gear inside motor

handpiece will be broken.

1.7.12 Please confirm whether the file is well installed and locked

before starting the motor handpiece.

1.7.13 Please set torque and speed as per the recommended

VSHFL¿FDWLRQVRI¿OHPDQXIDFWXUHU

1.7.14 Error in replacing lithium batteries can lead to unacceptable

risks, so use the original lithium battery and replace the lithium battery

according to the correct steps in the instructions.

1RWWRSRVLWLRQHTXLSPHQWWRPDNHLWGL൶FXOWWRRSHUDWHWKH

disconnection device.

1.7.16 Please remove the battery if the motor handpiece is not likely

to be used for some time.

'HYLFHVDIHW\FODVVL¿FDWLRQ

1.8.1 Type of operation mode: Continuous operating device

1.8.2 Type of protection against electric shock: Class II equipment

with internal power supply

1.8.3 Degree of protection against electric shock: B type applied part

1.8.4 Degree of protection against harmful ingress of water: Ordinary

equipment (IPX0)

1.8.5 Degree of safety application in the presence of a flammable

anesthetic mixture with air, oxygen, or nitrous oxide: Equipment cannot

be used in the presence of a flammable anesthetic mixture with air,

oxygen, or nitrous oxide.

$SSOLHGSDUWFRQWUDDQJOHOLSKRRN¿OHFOLSWRXFKSUREH

1.8.7 The contact duration of applied part: 1 to 10 minutes.

1.8.8 The temperature of the surface of applied part may reach

ႏ

3ULPDU\WHFKQLFDOVSHFL¿FDWLRQV

1.9.1 Battery

Lithium battery in motor handpiece: 3.7V /2000mAh

1.9.2 Power adapter:

Input: ~100V-240V 50Hz/60Hz 400mA Max

Output: DC5V/1A

1.9.3 Torque rang: 0.4Ncm-5.0Ncm（4mNm ~ 50mNm）

1.9.4 Speed rang: 100rpm~1000rpm

1.10 Environment parameters

(QYLURQPHQWWHPSHUDWXUHႏaႏ

1.10.2 Relative humidity: 30% ~ 75%

1.10.3 Atmospheric pressure: 70kPa ~ 106kPa

2 Installation

2.1 Basic accessories of product

Motor handpiece Contra angle

Charging base Spray nozzle

Power adapter Built-in Electrode

Measuring wire File clip

Lip hook Touch probe

2.2 Display Screens

2.2.1 Display Screens for 5 Operation Modes and Standby

2.2.1.1 EAL Mode

This mode is for canal measurement. The motor handpiece does not

run in this mode.

2.2.1.2 CW Mode

The motor handpiece rotates forward 360º, clockwise direction. Used

URWDW\¿OHVOLNHV'(1763/<3URWDSHURU:22'3(&.(5:3UR.

2.2.1.3 CCW Mode

The motor handpiece rotates counterclockwise direction only. This

mode is used to inject calcium hydroxide and other medicant. When this

mode is being used, a double-beep sounds continuously.

2.2.1.4 REC Mode

Recprocating mode.

F: Forward angle, R: Reverse angle

Adjustable every 10 degrees, adjustment range: 30º-340º.

It is suggested that the difference between the forward angle and

reverse angle should be greater than or equal to 120 degrees, otherwise,

URRWFDQDOVFDQQRWEHSUHSDUHGH൵HFWLYHO\

Forward Angle<Reverse Angle, such as F: 30/R: H൵HFWLYHFXWWLQJ

DQJOHLV5HYHUVH$QJOHLWLVVXLWDEOHIRUXVHGWKHUHFLSURFDWLQJ¿OHVOLNHV

'(1763/<:$9(21(RU:22'3(&.(5:21(

Forward Angle>Reverse Angle, such as F: 180/R: H൵HFWLYHFXWWLQJ

DQJOHLV)RUZDUG$QJOHLWLVVXLWDEOHIRUXVHGWKHUHFLSURFDWLQJ¿OHVOLNHV

SENDONELINE S1.

2.2.1.5 ATR Mode

ATR: Adaptive Torque Reverse function.

Continuous forward rotation normally, but when the load on the

¿OHH[FHHGVWKHVHWWRUTXHOLPLWWKH¿OHDXWRPDWLFDOO\VWDUWVDOWHUQDWLQJ

between 180º forward/90º reverse rotation or 240º forward/90º reverse

rotation.

Trigger torque: 0.4Ncm, 0.6Ncm, 0.8Ncm, 1Ncm

Speed: 150rpm, 300rpm, 500rpm

2.2.2 Torque Display

This appears when the motor is running. Meter shows the torque load

RQWKH¿OH

2.2.3 Canal Measurement Display

This appears when a file is inside the canal and the lip hook is

FRQWDFWLQJWKHSDWLHQWPRXWK%DUVLQPHWHUVKRZWKHORFDWLRQRIWKH¿OH

tip.

The meter numbers 1.0, 2.0, 3.0 and digital numbers 00-16 do not

represent the actual length from the apical foramen. It simply indicates

the file progression towards the apex. The digital numbers -1 and -2

LQGLFDWHWKDWWKH¿OHKDVSDVVHGWKHDSH[IRUDPHQ7KHGLJLWDOQXPEHU³´

indicate that the file has reached the apex foramen. Subtract 0.5-1mm

IURPWKHPHDVXUHG¿OHOHQJWKDVWKHZRUNLQJOHQJWK7KHVHQXPEHUVDUH

used to estimate the canal’s working length.

2.3 Instructions for contra angle

2.3.1 The contra angle adopts precision gear transmission, and the

transmission ratio is 1.8: 1.

2.3.2 Before the first use and after treatments, please clean and

disinfect contra angle with disinfectant of neutral PH value. After

disinfection, lubricate it with specific cleaning oil. Finally, sterilize

LWXQGHUKLJKWHPSHUDWXUHDQGKLJKSUHVVXUHႏEDUaEDU

(0.20MPa~0.23MPa)).

2.3.3 The contra angle can only be used cooperatively with this

device. Otherwise the contra angle will be damaged.

2.4 Installation and removal of contra angle.

2.4.1 Installation

Line up the notch inside the contra angle with the projection inside

the motor handpiece and slide it in until it clicks securely into place.

The contra angle rotates 300° so that the OLED display can always

be viewed easily.

2.4.2 Removal

Pull out the contra angle horizontally when the motor handpiece does

not run.

Warnings:

D%HIRUHSOXJJLQJLQRUSXOOLQJRXWFRQWUDDQJOHSOHDVH¿UVWVWRSWKH

motor handpiece.

E$IWHULQVWDOODWLRQSOHDVHFKHFNDQGFRQ¿UPWKDWWKHFRQWUDDQJOH

has been well installed.

c) The contra angle does not rotate freely. Do not try to rotate it past

its stopper.

,QVWDOODWLRQDQGUHPRYDORI¿OH

,QVWDOODWLRQRI¿OH

%HIRUHVWDUWLQJWKHGHYLFHSOXJWKH¿OHLQWRWKHKROHRIFRQWUDDQJOH

head.

Hold down the push button on the contra angle and insert the file.

7XUQWKH¿OHEDFNDQGIRUWKXQWLOLWLVOLQHGXSZLWKLQWHULRUODWFKJURRYH

DQGVOLSVLQWRSODFH5HOHDVHWKHEXWWRQWRORFNWKH¿OHLQWRWKHFRQWUD

angle.

Warnings:

After plugging the file into contra angle, let go the hand on push

FRYHUWRDVVXUHWKDWWKH¿OHFDQQRWEHWDNHQRXW

%HFDUHIXOZKHQLQVHUWLQJ¿OHVWRDYRLGLQMXU\WR¿QJHUV

Inserting and removing files without holding the push button may

damage the chuck of contra angle.

Please use files with shanks meet the ISO standard. (ISO standard:

Ø2.334 – 2.350 mm)

5HPRYDORI¿OH

3UHVVLQJWKHSXVKFRYHUDQGWKHQGLUHFWO\SXOORXWWKH¿OH

Warnings:

%HIRUHSOXJJLQJDQGSXOOLQJRXWWKH¿OHWKHPRWRUKDQGSLHFHPXVWEH

stopped.

%HFDUHIXOZKHQUHPRYLQJ¿OHVWRDYRLGLQMXU\WR¿QJHUV

Removing files without holding the push button will damage the

chuck of contra angle.

2.6 Canal measurement functional connection

This is not required if the canal measurement function will not be

used.

Connect the measuring wire to the motor handpiece. Line up the

measuring wire plug with the notch on the back of the motor and push it

all the way in.

Connect the file clip plug into the socket (black) on the measuring

wire. Connect the lip hook to the socket (white) on the measuring wire.

Warnings:

Connect the lip hook to the socket (white) on the measuring wire.

Otherwise, the function of root canal preparation and root canal length

measurement cannot be used together.

Make sure the screw is tight enough. Otherwise, it might come out

and be swallowed. Also, canal measurements might not be accurate.

3 Function and operation of product

%XWWRQGH¿QLWLRQDQGVHWWLQJV

a. Turn power on

Press Main button to turn on motor handpiece.

E7XUQSRZHUR൵

+ROGGRZQWKH6HWWLQJEXWWRQ³6´WKHQSUHVV0DLQEXWWRQWRWXUQR൵

motor handpiece.

c. Customized program change

3UHVV$GMXVWLQJEXWWRQ³´³´GXULQJVWDQGE\VDWH

d. Parameter setting

3UHVV6HWWLQJEXWWRQ³6´WLOOWDUJHWSDUDPHWHUVSUHVV$GMXVWLQJEXWWRQ

³´³´WRFKDQJHWKHQSUHVV0DLQEXWWRQRUZDLWVHFRQGVWRFRQ¿UP

e. Preset program selection

/RQJSUHVV6HWWLQJEXWWRQ³6´WRHQWU\SUHVHWSURJUDPGXULQJVWDQGE\

VWDWHSUHVV$GMXVWLQJEXWWRQ³´³´WRVHOHFW¿OHV\VWHPSUHVV6HWWLQJ

EXWWRQ³6´WRHQWU\VHOHFW¿OHQXPEHUSUHVV$GMXVWLQJEXWWRQ³´³´WR

VHOHFW¿OHQXPEHUWKHQSUHVV0DLQEXWWRQWRFRQ¿UP

f. Handpiece functions setting

:LWKWKHPRWRUKDQGSLHFHWXUQHGR൵KROGGRZQWKH6HWWLQJEXWWRQ³6´

and press Main button to entry handpiece functions setting, press Setting

EXWWRQ³6´WLOOWDUJHWVHWWLQJSUHVV$GMXVWLQJEXWWRQ³´³´WRDGMXVW

WKHQSUHVV0DLQEXWWRQWRFRQ¿UP

3.2 Screen display

Standby interface

a. Customized program sequence

number 0-9, totally 10 programs.

b. Battery consumption

c. Set speed

d. Set torque

e. Operation mode

Working interface

a. Set speed

b. Set torque

c. Real time torque

d. Torque display scale

Canal measurement mode interface

D$SLFDOUHIHUHQFHSRLQWÀDVKEDU

b. EAL: Electronic apex locator

Canal measurement state interface

a. Canal length indicator bar

b. Indication number

Digital numbers 00-16 do not

represent the actual length from the

apical foramen. It simply indicates

WKH¿OHSURJUHVVLRQWRZDUGVWKH

DSH[1XPEHU³´LQGLFDWHWKDWWKH

¿OHKDVUHDFKHGWKHDSLFDOIRUDPHQ

c. Apical foramen.

Apical reference point setting

interface

D$SLFDOUHIHUHQFHSRLQWÀDVKEDU

b. Apical foramen

F'LJLWDO³´PHWHUUHDGLQJYHU\

near physiological apical foramen.

7HUPVDQGGH¿QLWLRQ

CW Clockwise rotation, forward ration

%HDSSOLHGWRURWDW\¿OH

CCW

Counter clockwise rotation, reverse rotation

%HDSSOLHGWRVSHFLDO¿OHLQMHFWFDOFLXP

hydroxide and other solutions

REC

Reciprocating motion

%HDSSOLHGWRUHFLSURFDWLQJ¿OHSDWK¿OHDQG

URWDU\¿OHSURWHFWLRQE\VHWWLQJVRPHVSHFLDO

angle.

ATR

Adaptive torque reverse

Up to setting torque, the motor will move with

reciprocating ATR mode ; when torque reduce to

normal value, the motor will clockwise rotate.

Forward Angle

Activating in REC and ATR operation mode.

ATR mode: only 180º or 240º are available.

REC mode: adjustable every 10 degrees,

adjustment range: 30º-340º.

Reverse Angle

Activating in REC operation mode

Adjustable every 10 degrees, adjustment range:

30º-340º.

EAL

Electronic apex locator

In the mode, the device will work like a stand-

alone apex

AP Apical foramen.

Apical Action 7KH¿OHDFWLRQZKHQ¿OHWLSUHDFKHVWKHÀDVKEDU

point.

Flash Bar Position 6KRZVWKHSRLQWLQVLGHWKHFDQDOZKHUHVSHFL¿HG

apical action is triggered.

Auto Start 7KH¿OHURWDWLRQVWDUWVDXWRPDWLFDOO\ZKHQWKH¿OH

is inserted in the canal.

Apical Slow Down

7KH¿OHVORZVGRZQDXWRPDWLFDOO\DVLW

approaches the apex.

Activating in CW and CCW operation mode.

Operation Mode

5 operation modes for canal shaping and

measurement.

Such as CW, CCW, REC, ATR and EAL.

Speed File rotation speed.

Torque

(Torque Limit /

Trigger Torque)

For CW and CCW modes, the torque value

(Torque Limit) that triggers reverse rotation. For

ATR mode, the torque value (Trigger Torque)

that triggers ATR action.

4 Operation instruction

3RZHURQDQGSRZHUR൵

4.1.1 Starting and stopping of motor handpiece

D8QGHUWKHSRZHUR൵VWDWHRIPRWRUKDQGSLHFHSUHVV0DLQEXWWRQ

and then the motor handpiece will enter Standby interface. The interface

displays are as follow:

Standby interface

b) Under Standby mode, press Main button, and then the motor

handpiece will enter Working interface. The interface displays are as

follow:

Working interface

c) Press the Main button again, and then the motor handpiece backs

to Standby mode.

G+ROGGRZQWKH6HWWLQJEXWWRQ³6´WKHQSUHVV0DLQEXWWRQWRWXUQ

R൵PRWRUKDQGSLHFH,Q6WDQGE\,QWHUIDFHWKHPRWRUKDQGSLHFHZRXOG

automatically shut down after 3 minutes without any button-pressing

operation. The motor handpiece will also automatically shut down while

it is put into the charging base.

4.2 Selecting customized program sequence number

The motor handpiece has 10 memory programs(M0-M9) and 5 preset

SURJUDPVSUHVV$GMXVWLQJEXWWRQ³´³´WRFKDQJHFXVWRPL]HGSURJUDP

sequence number during standby state.

M0-M9 is a memory program for canal shaping and measurement,

every memory program has its own parameters such as Operation mode,

speed and torque, all these parameters can be changed.

4.3 Parameter setting

Before starting of motor handpiece, please

check the operation mode is correct.

All the parameters must be set according to

¿OHVPDNHVXUHDOOWKHSDUDPHWHUVDUHH[FHSWHG

before starting of motor handpiece, otherwise

KDVULVNRI¿OHVHSDUDWH

It has 5 operation modes for canal shaping

and measurement: CW, CCW, REC, ATR and

($/6HHFKDSWHU7HUPVDQGGH¿QLWLRQWRJHW

the explanations of these modes.)

3UHVV6HWWLQJEXWWRQ³6´RQFHGXULQJVWDQGE\

VWDWHSUHVV$GMXVWLQJEXWWRQ³´³´WRVHOHFW

correct Operation mode.

CCW mode is used to inject calcium hydroxide

and other medicant. When this mode is being

used, a double-beep sounds continuously,

used for indicating counter clockwise rotation

happening.

5HSHDWHGO\SUHVV6HWWLQJEXWWRQ³6´WRFKHFNDOOWKHQH[WOHYHO

parameters of this operation mode are expected, press Adjusting button

³´³´WRVHOHFWLIQRW

The speed setting can be adjusted from 100 rpm

to1000 rpm.

3UHVV$GMXVWLQJEXWWRQ³´³´WRLQFUHDVHRU

decrease speed. Long press to fast increase or

fast decrease speed.

In ATR mode, speed of 150rpm, 300rpm and

500rpm are available.

In REC mode, the speed is not optional.

The torque setting can be adjusted from 0.4Ncm

to 5Ncm.

3UHVV$GMXVWLQJEXWWRQ³´³´WRLQFUHDVHRU

decrease torque. Long press to fast increase or

fast decrease torque.

In ATR mode, the Trigger Torque of 0.4Ncm,

0.6Ncm, 0.8Ncm and 1.0Ncm are available.

In REC mode, the torque is not optional.

$FWLRQVWKDWKDSSHQDXWRPDWLFDOO\ZKHQWKH¿OH

tip reaches the point inside the canal determined

by the Flash Bar setting.

%HQH¿WIURPLQWHJUDWLRQRIOHQJWKGHWHUPLQDWLRQ

ZKHQWKH¿OHUHDFKHVWKHUHIHUHQFHSRLQWWKH

motor will response according to setting, it can

be Reverse , Stop and OFF.

3UHVV$GMXVWLQJEXWWRQ³´³´WRFKDQJH

2))'LVDEOH$SLFDO$FWLRQIXQFWLRQ¿OH

rotating as usual even if reach the reference

point.

Stop: automatically rotation stop when reach

the reference point, upward a little bit and will

rotate again.

Reverse: automatically reverses rotation when

reach or pass the reference point, upward a

little bit, the rotation direction will change back

again.

5RWDWLRQVWDUWVDXWRPDWLFDOO\ZKHQWKH¿OHLV

inserted into the canal and the canal length

indicator bar lights up more than 2 bars.

3UHVV$GMXVWLQJEXWWRQ³´³´WRFKDQJH

2))0RWRUGRHVQRWVWDUWZKHQ¿OHLVLQVHUWHG

into the canal. The Main button is used to start

and stop the motor handpiece.

ON: Motor starts automatically.

This is the reference point where various apical

actions are triggered.

3UHVV$GMXVWLQJEXWWRQ³´³´WRVHOHFW

UHIHUHQFHSRLQWE\FKDQJHWKHÀDVKEDU

7KHPHWHU¶VUHDGLQJLQGLFDWHVWKDWWKH¿OH

tip is located very near the physiological apical

foramen.

7KHUHIHUHQFHSRLQWÀDVKEDUFDQEHVHWIURP

to AP (Apex) on the meter.

5RWDWLRQDXWRPDWLFDOO\VORZVGRZQDVWKH¿OH

tip approaches the reference point.

3UHVV$GMXVWLQJEXWWRQ³´³´WRFKDQJH

OFF: Disable Apical Slow Down function.

ON: Rotation automatically slows down as the

¿OHWLSDSSURDFKHVWKHUHIHUHQFHSRLQW

Table of contents

Other Guilin Woodpecker Medical Instrument Medical Equipment manuals