GVA GVA32DLED User manual

Instruction Manual
32” (80cm)
HD LED LCD TV
/ GVA32DLED

2
Contents
Important safety instructions 4
Usage conditions and restrictions 4
Electrical safety, power cord and plug 5
Position 5
Cleaning and maintenance 5
Connections and Functions 7
Accessories 11
Wall mounting Instructions 12
Remote Control 14
Installing The Batteries 16
Using the Remote Control 16
First time installation 17
Selecting an Input Source 18
Operating The Menu 19
ATV Manual Tuning 20
DTV Manual Tuning 21
Program Edit 21
Operating The Menu (DTV) 23
Picture menu 22
Sound menu 23
Time menu 24
Lock menu 25
Hotel Mode 26
Setup menu 27
Operating The Menu (ATV) 29
PC Menu 30
Component / HDMI / AV 31
Media (Multimedia) Menu 32
Photo menu 32
Music menu 33
Movie menu 34

3
Contents
USB Multimedia Playback Format 35
PVR (Personal Video Recorder) 36
EPG (Electronic Program Guide) 41
Specications 42
FAQs 43

4
Important Safety Instructions
Read this manual thoroughly before rst use and keep it in a safe place for future reference,
along with the warranty card, purchase receipt and carton. The safety precautions enclosed
herein reduce the risk of re, electric shock and injury when correctly adhered to.
Usage conditions and restrictions
To prevent any injuries, the following safety precautions should be observed in the
installation, use, servicing and maintenance of equipment. Before operating this equipment,
please read this manual completely, and keep it nearby for future reference.
• Take notice of all the warnings.
• Do not use this TV near water.
• Clean only with a dry cloth.
• Do not block any of the ventilation openings.
• Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other TV’s
(including ampliers) that produce heat.
• Do not alter the grounding type plug provided with the TV. A grounding type plug has two
blades and a third grounding prong. The third prong is provided for your safety. When the
provided plug does not t into your outlet, consult an electrician for replacement of the
obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the TV.
• Only use the attachments/accessories specied by the manufacturer.
• Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold
with the TV.
• Unplug this TV during lightning storms or when unused for long periods of time.
• The appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible
for their safety.
• Young children should be supervised to ensure they do not play with the appliance.
• Refer all servicing to qualied service personnel. Servicing is required when the TV has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the TV, the TV has been exposed to rain or moisture, does not
operate normally, or has been dropped.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualied persons in order to avoid a hazard.
NOTE: The TV must not be exposed to dripping or splashing and no objects lled with
liquids, such as vases, shall be placed on the TV.

5
Important Safety Instructions
Position
•If a television is not positioned in a suciently stable location, it can be potentially
hazardous due to falling. Many injuries, particularly to children, can be avoided by taking
simple precautions such as:
•Securely attaching the TV to the wall mount fastened on the wall.
•Only using furniture that can safely support the television.
•Ensuring the television is not overhanging the edge of the supporting furniture.
•Educating children about the dangers of climbing on furniture to reach the TV controls.
•Not standing the TV on cloth or other materials placed between the television and
supporting furniture.
•Not placing the television on tall furniture (for example, cupboards or bookcases)
without anchoring both the furniture and the television to a suitable support.
•When deciding on where to put the TV set, make sure the place is:
•Well ventilated.
•Away from damp and cold.
•Protected from overheating and away from direct sunlight.
•Away from moisture drips or splashes.
•Protected from excessive dust.
•Do not install this equipment in a conned space such as a bookcase or similar unit.
•Do not put any objects lled with liquids, such as vases, on top of the TV set.
•Do not place any naked ame sources, such as lighted candles, on top of the TV set.
Cleaning and maintenance
•Dust the TV set by wiping the screen and cabinet with a soft, clean cloth.
Electrical safety, power cord and plug
•Before installing this TV set, make sure your outlet voltage corresponds to the voltage
stated on the appliance rating label.
•To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture.
•Do not overload the power cord or power outlet.
•Do not let the cord hang over the edge of a table or counter, or touch any hot surface.
•Do not allow anything to rest on or roll over the power cord and signal cable.
•Protect the power cord and signal cable from being trampled.
•Do not expose the power cord and signal cable to moisture.

6
Important Safety Instructions
•Do not apply excessive force to the screen when cleaning.
•Do not clean the screen with water or chemical cleaners as this may damage the LED
screen surface.
•Do not dismantle this product by yourself, as this may cause damage. There are no user-
serviceable parts contained in the TV set.
•If your TV set has been damaged, contact the after sales support line for advice or take
it to a local service centre or for inspection or repair. No liability can be accepted for any
damage caused by non-compliance with these instructions or any other improper use or
mishandling of appliance.
TV with Class 1 construction shall be connected to a main socket outlet with a protective
earthing connection.
WARNING:
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR AN ELECTRIC SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTIONS: • These servicing instructions are for use by qualied service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualied to do so.
•Any changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This symbol indicates that dangerous voltage constituting a risk of
electric shock is present within this unit.
This symbol indicates that there are important operating and
maintenance instructions in the documentation accompanying this unit.
CAUTION: TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

7
Connections and functions
7
Connections and functions
Back View and Control Con-
nections
3. HDM2: Connect the HDM2
output jack of DVD
4. YPbPr(Component) output
jack of DVD
3
9
Back View and Control Connections
3
9
HDMI-1HDMI-2 RF
VIDEOL
RCOAX USBH DMI-3
Coax
USB
HDMI3
Video
R in
L in
HDMI1 HDMI2 YP bP r PC-IN VGAR F
Headphone out
2
13
10
11
12
1. Headphone out: For private listening, connect
headphone into the PHONES jack of TV
2. HDMI: Connect the HDMI output jack of DVD
3. HDM2: Connect the HDMI2 output jack of DVD
4. YPbPr (Component) output jack of DVD
5. PC-IN: Connect the Audio output jack of PC
6. VGA: Connect the PC-RGB output jack of PC
7. RF: Connection the antenna
8. Coax: Connect the SPDIF receiver
9. USB: Connect to portable USB storage device
10. HDMI3: Connect the HDM3 output jack of DVD
11. Video: Connect the VIDEO output jack of DVD
12. R/L: Connect the R/L AUDIO output jack of DVD
13. Power Switch

8
Connections and functions
Power Cord Connection
- Connect the power cord correctly as shown.
- Press the STANDBY switch of your LED TV to switch the unit on. The power indicator on the
front panel lights up in green or blue.

9
YPbPr Connection
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the set. The picture
quality is improved compared to connecting a regular VCR to the video input. Connect the
Audio output of the DVD or VCR to the Audio input jacks on the set using the RCA cable.
(3.5mm plug-2 X RCA plug). Match the jacks colours: Y is green, Pb is blue, Pr is red. Audio left
is white and Audio right in red. Select YPbP input source using the SOURCE button on the
remote control.
Connections and functions
AV Connection
Connect the VIDEO and AUDIO output jack of the DVD or VCR to the AV IN jacks on the set
using the RCA cable (Yellow [video], White and Red [left and right audio]). Select the AV input
source using the SOURCE button on the remote control.
9
Connections and functions
AV Connection
Connect the VIDEO and AUDIO output jack of the DVD or VCR to the AV IN jacks on the set
using the RCA cable (Yellow [video], White and Red [left and right audio]). Select the AV input
source using the SOURCE button on the remote control.
YPbPr Connection
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the set.The picture
quality is improved compared to connecting a regular VCR to the video input. Connect the
Audio output of the DVD or VCR to the Audio input jacks on the set using the RCA cable.
(3.5mm plug-2 X RCA plug). Match the jacks colours: Y is green, Pb is blue, Pr is red. Audio left
is white and Audio right in red. Select YPbP input source using the SOURCE button on the
remote control.
HDMI-1 HDMI-2 RF
Video Lin
RinCoax USB HDMI3
Video L
RCoax USB HDMI3
HDMI1 HDMI2 Y Pb Pr PC-IN VGA RF
Headphone out
9
Connections and functions
AV Connection
Connect the VIDEO and AUDIO output jack of the DVD or VCR to the AV IN jacks on the set
using the RCA cable (Yellow [video], White and Red [left and right audio]). Select the AV input
source using the SOURCE button on the remote control.
YPbPr Connection
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the set.The picture
quality is improved compared to connecting a regular VCR to the video input. Connect the
Audio output of the DVD or VCR to the Audio input jacks on the set using the RCA cable.
(3.5mm plug-2 X RCA plug). Match the jacks colours: Y is green, Pb is blue, Pr is red. Audio left
is white and Audio right in red. Select YPbP input source using the SOURCE button on the
remote control.
HDMI-1 HDMI-2 RF
Video Lin
RinCoax USB HDMI3
Video L
RCoax USB HDMI3
HDMI1 HDMI2 Y Pb Pr PC-IN VGA RF
Headphone out

10
Connections and functions
VGA (PC) Connection
Connect the RGB output of the PC to the VGA jack on the set. Connect the
AUDIO output of the PC to the PC AUDIO jack on the set. Select the PC input source using the
SOURCE button the remote control.
HDMI Connection
HDMI connection allows the user to transfer both audio and video control signals through
one cable only. These signals are transferred in digital.
HDMI1 HDMI2 RF
HDMI1 HDMI2 RF
10
Connections and functions
VGA (PC) Connection
Connect the RGB output of the PC to the VGA jack on the set. Connect the
AUDIO output of the PC to the PC AUDIO jack on the set. Select the PC input
source using the SOURCE button the remote control.
HDMI Connection
HDMI connection allows the user to transfer both audio and video control
signals through one cable only.These signals are transferred in digital.
PC-IN
Headphone out
PC-IN
Headphone out
HDMI1 HDMI2 RF
HDMI1 HDMI2 RF
10
Connections and functions
VGA (PC) Connection
Connect the RGB output of the PC to the VGA jack on the set. Connect the
AUDIO output of the PC to the PC AUDIO jack on the set. Select the PC input
source using the SOURCE button the remote control.
HDMI Connection
HDMI connection allows the user to transfer both audio and video control
signals through one cable only.These signals are transferred in digital.
PC-IN
Headphone out
PC-IN
Headphone out

11
Connections and functions
Media Connection
USB: Connect to portable USB device to play your favourite photos, music or
movies.
The configuration of the components may look different from the following illustration.
11
Connections and functions
Media Connection
USB: Connect to portable USB device to play your favourite photos, music or
movies.
Video Lin
RinCoax USB HDMI3
Instruction
Manual Remote control
Batteries
illustration.
EP
FAV+ FAV-
PVR G
FREEZE ZOOM
SUBTITLEHOLD
PMODE
SOURCE
SMODE
AUDIO
SLEEP MUTE
TV/RADIO
INDEX
GVA32DLED
Accessories
80cm (31.5”) HD DLED TV
Model: GVA32DLED
INSTRUCTION MANUAL
12 MONTHWARRANTY
AFTER SALES SUPPORTAU:1300 886 649 NZ:0800 836 761
Value for your lifestyle
Accessories
11
Connections and functions
Media Connection
USB: Connect to portable USB device to play your favourite photos, music or
movies.
Video Lin
RinCoax USB HDMI3
Instruction
Manual
Remote
control
Batteries
illustration.
EP
FAV+ FAV-
PVR G
FREEZE ZOOM
SUBTITLEHOLD
PMODE
SOURCE
SMODE
AUDIO
SLEEP MUTE
TV/RADIO
INDEX
GVA32DLED
Accessories
80cm (31.5”) HD DLED TV
Model: GVA32DLED
INSTRUCTION MANUAL
12 MONTHWARRANTY
AFTER SALES SUPPORTAU:1300 886 649 NZ:0800 836 761
Value for your lifestyle
11
Connections and functions
Media Connection
USB: Connect to portable USB device to play your favourite photos, music or
movies.
Video Lin
RinCoax USB HDMI3
Instruction
Manual
Remote
control
Batteries
illustration.
EP
FAV+ FAV-
PVR G
FREEZE ZOOM
SUBTITLEHOLD
PMODE
SOURCE
SMODE
AUDIO
SLEEP MUTE
TV/RADIO
INDEX
GVA32DLED
Accessories
80cm (31.5”) HD DLED TV
Model: GVA32DLED
INSTRUCTION MANUAL
12 MONTHWARRANTY
AFTER SALES SUPPORTAU:1300 886 649 NZ:0800 836 761
Value for your lifestyle

12
Wall Mounting Instructions
1. Place the unit face down on a soft surface.
2. Gently position the glass base to the leg at the bottom of the TV.
3. Fasten the 6 provided screws (screw size B4x16F) to secure the stand on the TV according
to the diagram.
4. To remove the stand, reverse the steps above.
12
Wall Mounting Instructions
1.
2. Gently position the glass base to the leg at the bottom of the TV.
3. Fasten the 6 provided screws (screw size B4x16F) to secure the stand to the TV
according to the diagram.
4. To remove the stand, reverse the steps above.
5
Place the unit face down on a soft surface.
4

13
Wall Mounting Instructions
1. Ensure that the selected wall is made of appropriate material and can support the
weight of the TV. Make sure there are no pipes or cables inside the wall on your chosen
position.
2. Obtain a suitable wall mounting bracket and mounting eyebolts (thread size M4x10)
and screws from your local hardware store.
3. Place the unit face down on a soft surface.
4. Remove the attached leg at the bottom of the TV by removing the 5 screws on the leg
cover.
5. Refit the cover securely by replacing the 5 screws into their original positions.
13
Wall MountingInstructions
100mm
100mm
100mm
100mm
Thread hole size M4 x 10 depth (TV Mounting Screw Size) on the TV.
1. Ensure that the selected wall is made of appropriate material and can support the
weight of the TV. Make sure there are no pipes or cables inside the wall on your
chosen position.
2. Obtain a suitable wall mounting bracket and mounting eyebolts (thread size M4x10)
and screws from your local hardware store.
3. Place the unit face down on a soft surface.
4. Remove the attached leg at the bottom of the TV by removing the 5 screws on the
leg cover.
5. Refit the cover securely by replacing the 5 screws into their original positions.
6. Fasten 4 eyebolts panel according to the
diagram.
7. Fasten the wall mounting bracket using screws onto the wall.
8. Connect the eyebolts and the wall bracket securely with strong rope
9. Carefully check that all fastenings are secure before releasing the TV.
6. Fasten 4 eyebolts panel according to the diagram.
7. Fasten the wall mounting bracket using screws onto the wall.
8. Connect the eyebolts and the wall bracket securely with strong rope
9. Carefully check that all fastenings are secure before releasing the TV.
13
Wall MountingInstructions
100mm
100mm
100mm
100mm
Thread hole size M4 x 10 depth (TV Mounting Screw Size) on the TV.
1. Ensure that the selected wall is made of appropriate material and can support the
weight of the TV. Make sure there are no pipes or cables inside the wall on your
chosen position.
2. Obtain a suitable wall mounting bracket and mounting eyebolts (thread size M4x10)
and screws from your local hardware store.
3. Place the unit face down on a soft surface.
4. Remove the attached leg at the bottom of the TV by removing the 5 screws on the
leg cover.
5. Refit the cover securely by replacing the 5 screws into their original positions.
6. Fasten 4 eyebolts panel according to the
diagram.
7. Fasten the wall mounting bracket using screws onto the wall.
8. Connect the eyebolts and the wall bracket securely with strong rope
9. Carefully check that all fastenings are secure before releasing the TV.

14
Remote Control
AV Connection
STANDBY: Press to turn the TV set on or off
TV/RADIO: Select TV/RADIO modes
SOURCE: Press to cycle through the input source.
PMODE: Select picture mode.
SMODE: Select sound mode.
SLEEP: Sets the TV sleep time.
MUTE: Press to mute the sound. Press again or press V+ to un-
mute the TV.
-/-- : For direct access a digital TV channel
0-9: TV channel number select
Return to the previous channel viewed.
MENU: Brings up the main menu to the screen.
EXIT: Press to close the on-screen display.
TEXT: Press to switch between TV and Teletext mode.
DISPLAY: Press to display the source and channel’s information.
/ / / /OK : Allows you to move, select and setup the OSD
options.
VOL+/-: Volume up/down.
CH+/-: Channel up/down.
14
Remote ControlRemote Control
STANDBY:
SOURCE: Press to cycle through the input source.
PMODE: Select picture mode.
SMODE: Select sound mode.
TV/RADIO:
SLEEP: Sets the TV sleep time.
MUTE: Press to mute the sound. Press again or press V+ to
un-mute the TV.
-/-- : For direct access adigital TV channel
: Return to the previous channel viewed.
MENU: Brings up the main menu to the screen.
EXIT: Press to close the on-screen display.
DISPLAY: Press to display the source and channel’s
information.
/ / / /OK : Allows you to move, select and setup
the OSD options.
VOL+/-: Volume up/down.
CH+/-: Channel up/down.
ATV MODE
EP
FAV+ FAV-
PVR G
FREEZE ZOOM
SUBTITLE
HOLD
PMODE
SOURCE
SMODE
AUDIO
SLEEP MUTE
TV/RADIO
INDEX
GVA32DLED
Select TV/RADIO modes
0-9: TV channel number select.
TEXT: Press to switch between TV and Teletext mode.
14
Remote ControlRemote Control
STANDBY:
SOURCE: Press to cycle through the input source.
PMODE: Select picture mode.
SMODE: Select sound mode.
TV/RADIO:
SLEEP: Sets the TV sleep time.
MUTE: Press to mute the sound. Press again or press V+ to
un-mute the TV.
-/-- : For direct access adigital TV channel
: Return to the previous channel viewed.
MENU: Brings up the main menu to the screen.
EXIT: Press to close the on-screen display.
DISPLAY: Press to display the source and channel’s
information.
/ / / /OK : Allows you to move, select and setup
the OSD options.
VOL+/-: Volume up/down.
CH+/-: Channel up/down.
ATV MODE
EP
FAV+ FAV-
PVR G
FREEZE ZOOM
SUBTITLE
HOLD
PMODE
SOURCE
SMODE
AUDIO
SLEEP MUTE
TV/RADIO
INDEX
GVA32DLED
Select TV/RADIO modes
0-9: TV channel number select.
TEXT: Press to switch between TV and Teletext mode.

15
Remote Control
TELETEXT MODE*
14
Remote ControlRemote Control
STANDBY:
SOURCE: Press to cycle through the input source.
PMODE: Select picture mode.
SMODE: Select sound mode.
TV/RADIO:
SLEEP: Sets the TV sleep time.
MUTE: Press to mute the sound. Press again or press V+ to
un-mute the TV.
-/-- : For direct access adigital TV channel
: Return to the previous channel viewed.
MENU: Brings up the main menu to the screen.
EXIT: Press to close the on-screen display.
DISPLAY: Press to display the source and channel’s
information.
/ / / /OK : Allows you to move, select and setup
the OSD options.
VOL+/-: Volume up/down.
CH+/-: Channel up/down.
ATV MODE
EP
FAV+ FAV-
PVR G
FREEZE ZOOM
SUBTITLE
HOLD
PMODE
SOURCE
SMODE
AUDIO
SLEEP MUTE
TV/RADIO
INDEX
GVA32DLED
Select TV/RADIO modes
0-9: TV channel number select.
TEXT: Press to switch between TV and Teletext mode.
HOLD: Freeze the current page.
SIZE: Change the picture size.
SUBTITLE: Displays subtitles.
AUDIO : Select different audio modes.
: Play/Pause playback, or toggle DTV Time Shift.
: Stop playback.
FAV+/-: In FAV display mode,press to increase or
delete the highlighted channel.
/ : Fast Rewind/Fast Forward up to 16x.
/ : Previous/next chapter/track.
(PVR): Start recording when in DTV Mode.
EPG: Launched the EPG (Electronic Program Guide).
MEDIA: Press to select MEDIA mode.
FAV: Display your favourite channel list.

16
Installing the batteries
1. Open the cover at the back of the remote control unit completely.
2. Insert two 1.5V AAA batteries, ensuring the polarities (+ / -) of the batteries are correctly
aligned and the batteries are properly pushed into place so they can power the remote
control unit.
3. Replace the battery cover.
Installing the batteries
1. Open the cover at the back of the remote control unit completely.
2.Insert two 1.5V AAA batteries, ensuring the polarities (+ / -) of the batteries are
correctly aligned and the batteries are properly pushed
into place so they can power the remote control unit.
3.Replae the battery cover.
Precautions when using batteries
tDo not use old and new batteries together.
together.
tNote that there are chargeable and non-chargeable batteries.Do not attempt to
charge non-chargeable batteries.
tRemove the batteries from the remote control unit if you do not intend to use the unit
for a long time.
tWhen disposing used batteries, follow any guidelines for recycling and disposal of
batteries that apply in your local area.
The remote control should be operated within 20 feet (5m) and 30° to the left or the
right of the IR receiver at the front of the DLED TV.
Using the remote control
16
Precautions when using batteries
•Do not use old and new batteries together.
•Do not use different types of battery (for example, Manganese and Alkaline
batteries) together.
• Note that there are chargeable and non-chargeable batteries. Do not attempt to
charge non-chargeable batteries.
•Remove the batteries from the remote control unit if you do not intend to use the
unit for a long time.
• When disposing used batteries, follow any guidelines for recycling and disposal of
batteries that apply in your local area.
Using the remote control
The remote control should be operated within 20 feet (5m) and 30° to the left or the right of the
IR receiver at the front of the DLED TV.

17
First Time Installation
First Time Installation
-
When you switch on the TV f e, the First Time Installation menu
will be displayed on the screen.
- Use the buttons to select the language and then use the OK
button to go to the next page.
- Use the buttons to select the country and then start
searching for the DTV/Radio channels in your area.
This may take a few minutes.”
- When auto searching is complete, your TV will sho found.
17
When you switch on the TV for the first time, the First Time Installation menu will be
displayed on the screen.
- Use the / / / buttons to select the language and then use the OK button to go to
the next page.
- Use the / / / buttons to select the country and then start searching for the DTV
Radio channels in your area.
This may take a few minutes.”
-When auto searching is complete, your TV will show the first channel found.

18
You can select an input signal source by pressing the SOURCE button on the your
remote control or control panel of your TV. The on screen display menu shows the
diagram below on the your screen, and you can either press the SOURCE button on the
control panel or the arrows buttons on your remote control to choose an input signal
source.
You can choose from the following input sources if you have your audio and video
devices connected to your TV.
When you switch on this TV for the rst time, you need to select the language and the
country to auto search for all the DTV programs in your area.
•Press SOURCE button to display the input source list.
•Press / button to select the input source you want to watch
•Press OK / button to enter the input source.
•Press EXIT button to quit.
On Screen Display when you change the volume
1. When you press the VOL+ to increase the volume and VOL- to reduce the volume, the
diagram below shows on your screen for 15 seconds.
2. The MUTE symbol will show on one of your screen corners when you press the MUTE
button, press the MUTE button again and the symbol will disappear.
3. You can put the sound on again either by pressing the MUTE button or the VOL+
button. The diagram below shows you the sound level in the volume indicator.
Selecting an Input Source
18
You can select an input signal source by pressing the SOURCE button on the your
remote control or control panel of your TV. The on screen display menu shows the
diagram below on the your screen, and you can either press the SOURCE button on the
control panel or the arrows buttons on your remote control to choose an input signal
source.
You can choose from the following input sources if you have your audio and video
devices connected to your TV.
the country to auto search for all the DTV programs in your area.
• Press SOURCE button to display the input source list.
• Press button to select the input source you want to watch
• Press OK / button to enter the input source.
• Press EXIT button to quit.
On Screen Display when you change the volume
1. When you press the VOL+ to increase the volume and VOL- to reduce the volume, the
diagram below shows on your screen for 15 seconds.
2. The MUTE symbol will show on one of your screen corners when you press the MUTE
button, press the MUTE button again and the symbol will disappear.
3. You can put the sound on again either by pressing the MUTE button or the VOL+
button. The diagram below shows you the sound level in the volume indicator.
Selecting an Input Source
OK
ATV
DTV
Media
AV
PC
Component
HDMI1
HDMI2
HDMI3
18
You can select an input signal source by pressing the SOURCE button on the your
remote control or control panel of your TV. The on screen display menu shows the
diagram below on the your screen, and you can either press the SOURCE button on the
control panel or the arrows buttons on your remote control to choose an input signal
source.
You can choose from the following input sources if you have your audio and video
devices connected to your TV.
the country to auto search for all the DTV programs in your area.
• Press SOURCE button to display the input source list.
• Press button to select the input source you want to watch
• Press OK / button to enter the input source.
• Press EXIT button to quit.
On Screen Display when you change the volume
1. When you press the VOL+ to increase the volume and VOL- to reduce the volume, the
diagram below shows on your screen for 15 seconds.
2. The MUTE symbol will show on one of your screen corners when you press the MUTE
button, press the MUTE button again and the symbol will disappear.
3. You can put the sound on again either by pressing the MUTE button or the VOL+
button. The diagram below shows you the sound level in the volume indicator.
Selecting an Input Source
OK
ATV
DTV
Media
AV
PC
Component
HDMI1
HDMI2
HDMI3

19
1. Press the MENU button on the remote control, the on-screen menu will appear on the
screen.
2. Use the left and right navigation keys to select your main option.
The main menu items, from left to right, are:
Operating the Menus
19
Operating the Menus
noraeppalliwunemneercs-noeht,lortnocetomerehtnonottubUNEMehtsserP.1
the screen.
2. Use the left and right navigation keys to select your main option.
The main menu items, from left to right, are:
Channel Picture Sound Time Lock Setup
Channel menu
1. Press button to select the option that you want to adjust in the CHANNEL menu.
2. Press OK button to adjust.
3. MENU button to save and return back to the
previous menu.
Auto Tuning
Press button to select Auto Tuning, then press OK button to start auto search.
OK
Channel menu
19
Operating the Menus
noraeppalliwunemneercs-noeht,lortnocetomerehtnonottubUNEMehtsserP.1
the screen.
2. Use the left and right navigation keys to select your main option.
The main menu items, from left to right, are:
Channel Picture Sound Time Lock Setup
Channel menu
1. Press button to select the option that you want to adjust in the CHANNEL menu.
2. Press OK button to adjust.
3. MENU button to save and return back to the
previous menu.
Auto Tuning
Press button to select Auto Tuning, then press OK button to start auto search.
OK
1. Press / button to select the option that you want to adjust in the CHANNEL menu.
2. Press OK button to adjust.
3. After nishing your adjustment, press MENU button to save and return back to the
previous menu.
Auto Tuning
Press / button to select Auto Tuning, then press OK button to start auto search.

20
ATV Manual Tuning
Press / button to select ATV Manual Tuning, then press OK button.
20
ATV Manual Tuning
Press button to select ATV Manual Tuning, then press OK button.
Press button to select channel number you want to store.
Press button to select the third option. Press button to select audio system.
Press button to select search, then press button to start tuning.
Press OK button on your remote control to save the settings and menu button to go back to
the previous menu.
ATV Manual Tuning
Current CH 1
Color System PAL
Sound System BG
Fine-Tune 422.00 MHz
AFC Off
Search
Press / button to select channel number you want to store.
Press / button to select the third option. Press / button to select audio system.
Press / button to select search, then press / button to start tuning.
Press OK button on your remote control to save the settings and menu button to go back to
the previous menu.
Operating the Menus