GVA GVALEDC19J User manual

Instruction Manual
18.5” (47cm)
HD LED LCD TV COMBO
/ GVALEDC19J

2
Contents
Preface 4
Safety Precautions 4
Important Safety Instructions 7
In the Carton 10
Connections and Functions 11
Basic Installation 12
Remote Control 16
Remote Control Setup 20
Basic Operation 21
Picture Menu 22
Sound Menu 25
Channel Menu 28
Lock Menu 33
Hotel Mode 35
Setup Menu 36
HDMI CEC Control 38
PVR and Time Shift Operation 39
PVR Setting 39
First Time Setup 39
Reset 39
USB Device Setup 40
Timeshift 41
Instant Recording 42
Time Recorder 42
Playlist 43
EPG (Electronic Program Guide) 44
ATV / HDMI / AV / YPbPr / PC 45
Multi Media Menu Operation 46
Photo 46
Music 47
Movie 47
Text 48

3
Contents
DVD Function 49
Specications 52
Wall Mounting Instructions 53
Care and Maintenance 54
FAQs 55

4
Preface
Thank you for building this TV! Please read this manual thoroughly before operating the TV.
Make sure the TV was not damaged in transit. Should the TV is damaged, do not install it and
contact your dealer. Check that you have all the accessories according to the model.
Safety Precautions
1. PREFACE
Thank you for buying this TV !Please read this manual throughly before operating the TV.
Make sure the TV was not damaged in transit.Should the TV is damaged,do not install
your dealer.Check that you have all the accessories according to the model.
it and contact
2. SAFETY PRECAUTIONS
Power cord and cables must be properly routed and protected to prevent
people from stepping on them and causing the TV to fall.
Put the TV on a stable surface.
Do not place any material on the TV.
Do not block or cover the ventilation openings on the TV.
If you have a wall mount,check that it is steady.
Do not use the with fixtures other than those provided or
suggested by the manufacturer.
TV
3
Put the TV on a stable surface.
Do not place any material on the TV.
Do not use the TV with xtures other than those provided or
suggested by the manufacturer.
Do not block or cover the ventilation openings on the TV. If
you have a wall mount, check that it is steady.

5
Power cord and cables must be properly routed and protected
to prevent people from stepping on them and causing the TV
to fall.
Keep the TV dry and away from humidity.
Keep the TV away from heat sources.
Unplug the TV before cleaning it. Do not use solvent or
liquid to clean the TV. Once Clean the TV with soft and dry
cloth.
Safety Precautions (Cont.)
1. PREFACE
Thank you for buying this TV !Please read this manual throughly before operating the TV.
Make sure the TV was not damaged in transit.Should the TV is damaged,do not install
your dealer.Check that you have all the accessories according to the model.
it and contact
2. SAFETY PRECAUTIONS
Power cord and cables must be properly routed and protected to prevent
people from stepping on them and causing the TV to fall.
Put the TV on a stable surface.
Do not place any material on the TV.
Do not block or cover the ventilation openings on the TV.
If you have a wall mount,check that it is steady.
Do not use the with fixtures other than those provided or
suggested by the manufacturer.
TV
3
Keep the TV dry and away from humidity.
Keep the TV away from heat sources.
Unplug the before cleaning it.Do not use solvent or liquidTV to clean
the TV.
Only clean the TV with a soft and dry cloth.
In case of troubleshooting,do not use spare parts other than those
suggested by the manufacturer.Using inadequate spare parts can
shocks,short-circuits fire or other incidents.lead to electric
Unplug the TV during lightening storms or when unused for long periods
of time.
4

6
In cause of troubleshooting, do not use spare parts
other than those suggested by the manufacturer. Using
inadequate spare parts can lead to electric shocks, short-
circuits re or other incidents.
Unplug the TV during lightening storms or when unused for
long periods of time.
Safety Precautions (Cont.)
Keep the TV dry and away from humidity.
Keep the TV away from heat sources.
Unplug the before cleaning it.Do not use solvent or liquidTV to clean
the TV.
Only clean the TV with a soft and dry cloth.
In case of troubleshooting,do not use spare parts other than those
suggested by the manufacturer.Using inadequate spare parts can
shocks,short-circuits fire or other incidents.lead to electric
Unplug the TV during lightening storms or when unused for long periods
of time.
4

7
Important Safety Instructions
Read this manual thoroughly before rst use and keep it in a safe place for future reference,
along with the warranty card, purchase receipt and carton. The safety precautions enclosed
herein reduce the risk of re, electric shock and injury when correctly adhered to.
Usage conditions and restrictions
To prevent any injuries, the following safety precautions should be observed in the
installation, use, servicing and maintenance of equipment. Before operating this equipment,
please read this manual completely, and keep it nearby for future reference.
• Take notice of all the warnings.
• Do not use this TV near water.
• Clean only with a dry cloth.
• Do not block any of the ventilation openings.
• Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other TV’s
(including ampliers) that produce heat.
• Do not alter the grounding type plug provided with the TV. A grounding type plug has two
blades and a third grounding prong. The third prong is provided for your safety. When the
provided plug does not t into your outlet, consult an electrician for replacement of the
obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the TV.
• Only use the attachments/accessories specied by the manufacturer.
• Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold
with the TV.
• Unplug this TV during lightning storms or when unused for long periods of time.
• The appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible
for their safety.
• Young children should be supervised to ensure they do not play with the appliance.
• Refer all servicing to qualied service personnel. Servicing is required when the TV has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilt
or objects have fallen into the TV, the TV has been exposed to rain or moisture, does not
operate normally, or has been dropped.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualied persons in order to avoid a hazard.
NOTE: The TV must not be exposed to dripping or splashing and no objects lled with
liquids, such as vases, should be placed on the TV.

8
Important Safety Instructions
Position
• If a television is not positioned in a suciently stable location, it can be potentially
hazardous due to falling. Many injuries, particularly to children, can be avoided by taking
simple precautions such as:
• Securely attaching the TV to the wall mount fastened on the wall.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the TV controls.
• Not standing the TV on cloth or other materials placed between the television and
supporting furniture.
• Not placing the television on tall furniture (for example, cupboards or bookcases)
without anchoring both the furniture and the television to a suitable support.
• When deciding on where to put the TV set, make sure the place is:
• Well ventilated.
• Away from damp and cold.
• Protected from overheating and away from direct sunlight.
• Away from moisture drips or splashes.
• Protected from excessive dust.
• Do not install this equipment in a conned space such as a bookcase or similar unit.
• Do not put any objects lled with liquids, such as vases, on top of the TV set.
• Do not place any naked ame sources, such as lighted candles, on top of the TV set.
Cleaning and maintenance
• Dust the TV set by wiping the screen and cabinet with a soft, clean cloth.
Electrical safety, power cord and plug
• Before installing this TV set, make sure your outlet voltage corresponds to the voltage
stated on the appliance rating label.
• To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture.
• Do not overload the power cord or power outlet.
• Do not let the cord hang over the edge of a table or counter, or touch any hot surface.
• Do not allow anything to rest on or roll over the power cord and signal cable.
• Protect the power cord and signal cable from being trampled.
• Do not expose the power cord and signal cable to moisture.

9
Important Safety Instructions
• Do not apply excessive force to the screen when cleaning.
• Do not clean the screen with water or chemical cleaners as this may damage the LED
screen surface.
• Do not dismantle this product by yourself, as this may cause damage. There are no user-
serviceable parts contained in the TV set.
• If your TV set has been damaged, contact the after sales support line for advice or take
it to a local service centre for inspection or repair. No liability can be accepted for any
damage caused by non-compliance with these instructions or any other improper use or
mishandling of appliance.
TV with Class 1 construction shall be connected to a main socket outlet with a protective
earthing connection.
WARNING:
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR AN ELECTRIC SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTIONS: • These servicing instructions are for use by qualied service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualied to do so.
•Any changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This symbol indicates that dangerous voltage constituting a risk of
electric shock is present within this unit.
This symbol indicates that there are important operating and
maintenance instructions in the documentation accompanying this unit.
CAUTION: TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

10
In the Carton

11
Connections and Functions
1. DC IN: Main power input.
2. Headphone: Connect the earphone.
3. VGA: Connect to a PC’s PC-RGB output socket.
4. PC Audio: Connect to a PC’s Audio output socket.
5. RF: Connection for the antenna plug.
6. HDMI: Connect to the HDMI output socket of a
DVD player.
7. USB: Connect to portable USB storage device.
8. YPbPr: Connect to the (Component) output socket
of a DVD Player.
9. Coax: Connect to an external digital audio device.
10. Video: Connect to a DVD player’s VIDEO output
socket.
11. R/L: Connect the R/L AUDIO output socket of DVD.
Front and Back Connection of LED TV
Back View and Control Connections
Play
11
Connections and Functions
1. DC IN: Main power input.
2. Headphone: Connect earphones.
3. VGA: Connect to a PC’s PC-RGB output socket.
4. PC Audio: Connect to a PC’s Audio output socket.
5. RF: Connection for the antenna plug.
6. HDMI: Connect to the HDMI output socket of a
DVD player.
7. USB: Connect to a portable USB storage device.
8. YPbPr: connect to the (component) output
sockets of a DVD player.
9. Coax: Connect to an external digital audio device.
10. Video: Connect to a DVD player’s VIDEO output
socket.
11. R/L: Connect to the R/L AUDIO output socket of a
DVD player.
Front and Back Connection of LED LCD TV
Back View and Control Connections
Insert the disc with
the label side
facing yourself
Play
11
Connections and Functions
1. DC IN: Main power input.
2. Headphone: Connect earphones.
3. VGA: Connect to a PC’s PC-RGB output socket.
4. PC Audio: Connect to a PC’s Audio output socket.
5. RF: Connection for the antenna plug.
6. HDMI: Connect to the HDMI output socket of a
DVD player.
7. USB: Connect to a portable USB storage device.
8. YPbPr: connect to the (component) output
sockets of a DVD player.
9. Coax: Connect to an external digital audio device.
10. Video: Connect to a DVD player’s VIDEO output
socket.
11. R/L: Connect to the R/L AUDIO output socket of a
DVD player.
Front and Back Connection of LED LCD TV
Back View and Control Connections
Insert the disc with
the label side
facing yourself
1. Press “STANDBY” button to turn
standby mode on or o.
2. Press “SOURCE” to select the
input source.
3. Press “MENU” to bring up the
main menu on the screen.
4. Press “CH+” or “CH-”to scan
through channels.
5. Press “VOL+” or “VOL-” to increase
or decrease the volume.
6. POWER INDICATOR: Show red
in standby mode, show green
when your TV is switched on.
7. REMOTE SENSOR: Infrared sensor
for the remote control.
8. Play / Pause program.
9. Load / eject DVD disc.

12
Basic Installation
Power Cord Connection
- Connect the power cord correctly as shown.
- Press the STANDBY switch of your LED TV to switch the unit on. The power indicator on the
front panel lights up in green.
12
Basic Installation
Power Cord Connection
- Connect the power cord and power adaptor correctly as shown.
- Press the STANDBY switch of your LED TV to switch the unit on. The power indicator on the
front panel lights up in green or blue.
Antennas Connection
To ensure good picture and sound, a TV antenna system needs to be installed. The antenna
system as shown can be sourced from TV equipment shops, which will provide service for
correct installation and connections. After installation, insert the 75-OHM antenna plug into
the antenna socket as shown.
Antennas Connection
To ensure good picture and sound, TV antenna system needs to be installed. The antenna
system as shown can be sourced from TV equipment shops, which will provide service for
correct installation and connections. After installation, insert the 75-OHM antenna plug into
the antenna socket as shown.
12
Basic Installation
Power Cord Connection
- Connect the power cord and power adaptor correctly as shown.
- Press the STANDBY switch of your LED TV to switch the unit on. The power indicator on the
front panel lights up in green or blue.
Antennas Connection
To ensure good picture and sound, a TV antenna system needs to be installed. The antenna
system as shown can be sourced from TV equipment shops, which will provide service for
correct installation and connections. After installation, insert the 75-OHM antenna plug into
the antenna socket as shown.

13
YPbPr Connection
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV. The picture quality
is improved compared to connecting a regular VCR to the video input. Connect the Audio
output of the DVD or VCR to the Audio input socket on the set using the RCA cable. Match
the sockets’ colours: Y is green, Pb is blue, Pr is red. Audio left is white and Audio right in red.
Select YPbPr input source using the SOURCE button on the remote control.
Basic Installation (Cont.)
AV Connection
Connect the VIDEO and AUDIO output socket of the DVD or VCR to the AV IN socket on the
set using the RCA cable (Yellow [video],White and Red [left and right audio]). Select the AV
input source using the SOURCE button on the remote control.
13
YPbPr Connection
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV. The picture quality
is improved compared to connecting a regular VCR to the video input. Connect the Audio
output of the DVD or VCR to the Audio input sockets on the set using the RCA cable
(3.5mm plug-2 X RCA plug). Match the sockets colours: Y is green, Pb is blue, Pr is red. Audio
left is white and Audio right in red. Select YPbP input source using the SOURCE button on the
remote control.
Basic Installation (Cont.)
AV Connection
Connect the VIDEO and AUDIO output sockets of the DVD or VCR to the AV IN sockets on the
TV using the RCA cable (Yellow [video],White and Red [left and right audio]). Select the AV
input source using the SOURCE button on the remote control.
13
YPbPr Connection
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV. The picture quality
is improved compared to connecting a regular VCR to the video input. Connect the Audio
output of the DVD or VCR to the Audio input sockets on the set using the RCA cable
(3.5mm plug-2 X RCA plug). Match the sockets colours: Y is green, Pb is blue, Pr is red. Audio
left is white and Audio right in red. Select YPbP input source using the SOURCE button on the
remote control.
Basic Installation (Cont.)
AV Connection
Connect the VIDEO and AUDIO output sockets of the DVD or VCR to the AV IN sockets on the
TV using the RCA cable (Yellow [video],White and Red [left and right audio]). Select the AV
input source using the SOURCE button on the remote control.

14
Basic Installation (Cont.)
VGA (PC) Connection
Connect the RGB output of the PC to the VGA socket on the set. Connect the AUDIO output
of the PC to the PC AUDIO socket on the set. Select the PC input source using the SOURCE
button the remote control.
HDMI Connection
HDMI connection allows the user to transfer both audio and video control signals through
one cable only. These signals are transferred in digital.
14
Basic Installation (Cont.)
VGA (PC) Connection
Connect the RGB output of the PC to the VGA socket on the set. Connect the AUDIO output
of the PC to the PC AUDIO socket on the set. Select the PC input source using the SOURCE
button on the remote control.
HDMI Connection
HDMI connection allows the user to transfer both audio and video control signals through
one cable only. These signals are transferred in digital.
USBRF HDMI
PC
Audio
VGA Y Pb Pr
DC IN Head
phone
USBRF HDMI
PC
Audio
VGA Y Pb Pr DC IN Head
phone
14
Basic Installation (Cont.)
VGA (PC) Connection
Connect the RGB output of the PC to the VGA socket on the set. Connect the AUDIO output
of the PC to the PC AUDIO socket on the set. Select the PC input source using the SOURCE
button on the remote control.
HDMI Connection
HDMI connection allows the user to transfer both audio and video control signals through
one cable only. These signals are transferred in digital.
USBRF HDMI
PC
Audio
VGA Y Pb Pr
DC IN Head
phone
USBRF HDMI
PC
Audio
VGA Y Pb Pr DC IN Head
phone

15
Basic Installation (Cont.)
Coax Connection
Connect the Coaxial output of the TV to the Coaxial (S/PDIF) input on the amplifier. Your
amplifier must have the corresponding decoding functions to decode the signal coming
from the TV.
15
Basic Installation (Cont.)
Coax Connection
Connect the Coaxial output of the TV to the Coaxial (S/PDIF) input on the amplifier. Your
amplifier must have the corresponding decoding functions to decode the signal coming
from the TV.
Video R LCoax
USB Connection
A portable USB device can be connected to the USB socket.
USBRF HDMI
PC
Audio
VGA Y Pb Pr DC IN Head
phone
USB Connection
A portable USB device can be connected to the USB socket.
15
Basic Installation (Cont.)
Coax Connection
Connect the Coaxial output of the TV to the Coaxial (S/PDIF) input on the amplifier. Your
amplifier must have the corresponding decoding functions to decode the signal coming
from the TV.
Video R LCoax
USB Connection
A portable USB device can be connected to the USB socket.
USBRF HDMI
PC
Audio
VGA Y Pb Pr DC IN Head
phone

16
Remote Control
Remote control instruction TV mode
STANDBY: Press to turn the TV set on or off.
SOURCE: Press to cycle through the input source.
PMODE: Select picture mode.
SMODE: Select sound mode.
AUDIO: Select different audio modes.
SLEEP: Set the TV to sleep.
MUTE: Press to mute the sound. Press again or press V+ to
unmute the TV.
0-9: TV channel number select.
-/-- : Press this button to enter a program number for multiple
program channel such as 2-1,etc.
: Return to the previous channel viewed.
FAV: Display your favourite channel list.
MENU: Brings up the main menu to the screen.
EXIT: Exit the main TV menu to the screen.
DISPLAY: Press to display the source and channel’s
information.
/ / / /OK : Allows you to move, select and setup the
OSD options.
VOL+/-: Press to increase/decrease the sound level.
CH+/-: Press to scan through channels.
STANDBY:
SOURCE: Press to cycle through the input source.
PMODE: Select picture mode.
SMODE: Select sound mode.
AUDIO:
SLEEP: Sets the TV sleep time.
MUTE: Press to mute the sound. Press again or press
0-9: TV channel number select.
: Return to the previous channel viewed.
FAV: Display your favourite channel list.
MENU: Brings up the main menu to the screen.
EXIT: Press to close the on-screen display.
DISPLAY: Press to display the source and channel’s
information.
/ / / /OK : Allows you to move, select and setup
the OSD options.
VOL+/-: Volume up/down.
CH+/-: Channel up/down.
16
Remote Control
Remote control instruction TV mode
-/-- : Press this button to enter a program number
for multiple program channel such as 2-1,etc.
GVALEDC19J
V+ to un-mute the TV.
LANG

17
Remote Control (Cont.)
Remote control instruction in TELETEXT mode
NUMBER BUTTONS: Press 0-9 to select a teletext page.
TEXT: Press to switch between TV and Teletext mode.
COLOUR BUTTONS: Select for Preferred TELETEXT page.
HOLD: Freeze the current page.
SIZE: Change the picture size.
SUBTITLE: To display subtitle.
INDEX: Request index page when index link is valid.
FREEZE: Reveal or hide the hidden words.
ZOOM: Press this button to select the default screen size
on your TV.
* Teletext or Austext is no longer available, nor is there
any plan for a replacement teletext service in Australia.
For more information, please visit the websites of the
Australian channel providers. However, one teletext
option, “closed captions”, is still working on most
Australian television channels. This service allows you
to activate subtitles while watching normal television
programs that provide it.
NUMBER BUTTONE: Press 0-9 to select a teletext page.
TEXT: Press to switch between TV and Teletext mode.
COLOUR BUTTONS: Select 4 preferred teletext pages.
HOLD: Freeze the current page.
SIZE: Change the picture size.
SUBTITLE: Displays subtitles.
INDEX: Request index page when index is valid.
* Teletext or Austext is no longer available, nor is
there any plan for a replacement teletext service
in Australia. For more information, please visit
the websites of the Australian channel providers.
However, one teletext option, “closed captions”, is
still working on most Australian television channels.
This service allows you to activate subtitles while
watching normal television programs that provide it.
GVALEDC19J
17
Remote Control (Cont.)
Remote control instruction in TELETEXT mode
FREEZE: Reveal or hide the hidden words.
ZOOM: Press this button to select the default screen size
on your TV.
LANG

18
Remote Control (Cont.)
Remote control instruction in DTV mode
NUMBER BUTTONS: Press 0-9 to select a channel.
FAV: Press to display your favourite channel list.
MENU: Brings up the main DTV menu to the screen.
DISPLAY: Press display the source and channel’s information.
/ / / /OK : Allows you to move, select and setup the
OSD option.
CH+/-: Channel up/down.
COLOUR BUTTONS: Used in a few sub-menus.
SUBTITLE: To display subtitle.
: PLAY/PAUSE in TIMESHIFT and MEDIA mode.
: Stop in MEDIA mode or exit the REC mode.
/ : Fast reverse and forward key in MEDIA mode.
/ : Jump to previous and next track in MEDIA mode.
SIZE: Change the picture format.
EPG: Lanuches the EPG ( Electronic Program Guide).
MEDIA: Press to select MEDIA mode.
TV/Radio: Select TV or Radio modes.
(REC): Record the program in DTV mode.
STANDBY:
SOURCE: Press to cycle through the input source.
PMODE: Select picture mode.
SMODE: Select sound mode.
AUDIO:
SLEEP: Sets the TV sleep time.
MUTE: Press to mute the sound. Press again or press
0-9: TV channel number select.
: Return to the previous channel viewed.
FAV: Display your favourite channel list.
MENU: Brings up the main menu to the screen.
EXIT: Press to close the on-screen display.
DISPLAY: Press to display the source and channel’s
information.
/ / / /OK : Allows you to move, select and setup
the OSD options.
VOL+/-: Volume up/down.
CH+/-: Channel up/down.
16
Remote Control
Remote control instruction TV mode
-/-- : Press this button to enter a program number
for multiple program channel such as 2-1,etc.
GVALEDC19J
V+ to un-mute the TV.
LANG

19
Remote Control (Cont.)
Remote control instruction in DVD mode
:Press to eject the disc.
NUMBER BUTTONS: Press 0-9 to select the DVD Chapter.
DISPLAY: Press to display the DVD information on DVD.
D.SETUP: Press to access DVD setup menu.
/ / / /OK : Allows you to move, select and setup
the DVD option.
GOTO: Press to access the GOTO menu.
A-B: This button enables you to repeat a selected section
from the disc.
REPEAT: Press PEPEAT to cycle through the repeat play
options.
SUBTITLE: To display subtitle.
TITLE: When DVD is playing, brings up the Title Menu.
D.MENU: Access to DVD disc menu.
AUDIO: AUDIO selection buttons in DVD mode.
: PLAY/PAUSE in DVD mode.
: Stop DVD playing.
/ : Fast reverse and forward key in DVD mode.
/ : Jump to previous and next track/chapter in DVD
mode.
NUMBER BUTTONE: Press 0-9 to select a teletext page.
TEXT: Press to switch between TV and Teletext mode.
COLOUR BUTTONS: Select 4 preferred teletext pages.
HOLD: Freeze the current page.
SIZE: Change the picture size.
SUBTITLE: Displays subtitles.
INDEX: Request index page when index is valid.
* Teletext or Austext is no longer available, nor is
there any plan for a replacement teletext service
in Australia. For more information, please visit
the websites of the Australian channel providers.
However, one teletext option, “closed captions”, is
still working on most Australian television channels.
This service allows you to activate subtitles while
watching normal television programs that provide it.
GVALEDC19J
17
Remote Control (Cont.)
Remote control instruction in TELETEXT mode
FREEZE: Reveal or hide the hidden words.
ZOOM: Press this button to select the default screen size
on your TV.
LANG

20
Remote Control Setup
1. Open the cover.
2. Your remote requires 2X AAA Batteries. When inserting the batteries, make sure correct
polarity marks”+”and“-”on the batteries match the diagram as shown within the battery
compartment.
3. Replace the battery cover.
To prevent battery leakage which may result in bodily injury or damage to the remote:
1. Install all batteries correctly, and as marked on the remote control.
2. Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc) Remove batteries
when the remote is not used for a long time.
3. Recommend using ALKALINE type batteries.
20
Remote Control Setup
1. Open the cover.
2. Your remote requires 2X AAA Batteries. When inserting the batteries, make sure correct
polarity marks”+”and “-” on the batteries match the diagram as shown within the battery
compartment.
3. Replace the battery cover.
To prevent battery leakage which may result in bodily injury or damage to the remote:
1. Install all batteries correctly, and as marked on the remote control.
2. Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc) Remove batteries
when the remote is not used for a long time.
3. It is recommended that you use ALKALINE type batteries.