H3C EPON OLT User manual

H3C EPON
OLT Operation Manual
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: T2-081647-20070415-C-1.02
Product Version: Release 5100 Series

Copyright © 2006-2007, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means
without prior written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
H3C, , Aolynk, , H3Care, , TOP G, , IRF, NetPilot,
Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,
Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and
HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their
respective owners.
Notice
The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but
all statements, information, and recommendations in this document do not constitute
the warranty of any kind, express or implied.
To obtain the latest information, please access:
http://www. h3c.com
Technical Support
[e-mail]
http://www. h3c.com

About This Manual
Related Documentation
In addition to this manual, each H3C EPON OLT Operation Manual set includes the
following:
Manual Description
H3C EPON OLT Command Manual
It introduces the commands for EPON
system configuration, OLT
configuration, ONU configuration, ONU
UNI configuration, and alarm
configuration.
H3C EPON OLT Installation Manual
It introduces the switching engine,
service board, installation, booting,
configuration and maintenance of the
EPON OLT devices (the S7500 series
Ethernet switches applying EPON
feature).
Organization
H3C EPON OLT Operation Manual is organized as follows:
Chapter Contents
1 EPON System Configuration Introduces the basic concept of the
EPON technology, its operation mode
and the configurations of the entire
system.
2 OLT Configuration Elaborates on the configurations about
the OLT.
3 ONU Configuration Elaborates the configurations about the
ONU.
4 ONU UNI Configuration Elaborates the configurations about the
ONU UNI.
5 Alarm Configuration Presents the configurations about the
alarm types supports by the EPON
system.
6 Switch Features in EPON System Lists Switch Features Supported by
EPON currently.

Conventions
The manual uses the following conventions:
I. Command conventions
Convention Description
Boldface The keywords of a command line are in Boldface.
italic Command arguments are in italic.
[ ] Items (keywords or arguments) in square brackets [ ] are
optional.
{ x | y | ... }
Alternative items are grouped in braces and separated by
vertical bars. One is selected.
[ x | y | ... ]
Optional alternative items are grouped in square brackets
and separated by vertical bars. One or none is selected.
{ x | y | ... } *
Alternative items are grouped in braces and separated by
vertical bars. A minimum of one or a maximum of all can be
selected.
[ x | y | ... ] *
Optional alternative items are grouped in square brackets
and separated by vertical bars. Many or none can be
selected.
&<1-n> The argument(s) before the ampersand (&) sign can be
entered 1 to n times.
# A line starting with the # sign is comments.
II. GUI conventions
Convention Description
Boldface Window names, button names, field names, and menu
items are in Boldface. For example, the New User window
appears; click OK.
> Multi-level menus are separated by angle brackets. For
example, File > Create > Folder.
Convention Description
< > Button names are inside angle brackets. For example, click
<OK>.
[ ] Window names, menu items, data table and field names
are inside square brackets. For example, pop up the [New
User] window.
/ Multi-level menus are separated by forward slashes. For
example, [File/Create/Folder].

III. Symbols
Convention Description
Caution Means reader be careful. Improper operation may cause
data loss or damage to equipment.
Note Means a complementary description.