H3C S10500X-G Series Owner's manual

H3C S10500X-G Switch Series
Hardware Information and Specifications
New H3C Technologies Co., Ltd.
http://www.h3c.com
Document version: 6W101-20240123

Copyright © 2023-2024, New H3C Technologies Co., Ltd. and its licensors
All rights reserved
No part of this manual may be reproduced or transmitted in any form or by any means without prior written
consent of New H3C Technologies Co., Ltd.
Trademarks
Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this
document are the property of their respective owners.
Notice
The information in this document is subject to change without notice. All contents in this document, including
statements, information, and recommendations, are believed to be accurate, but they are presented without
warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions
contained herein.
Environmental protection
This product has been designed to comply with the environmental protection requirements. The storage, use,
and disposal of this product must meet the applicable national laws and regulations.

Preface
This document describes hardware information and specifications for S10500X-G switch series. It
covers chassis views and technical specifications, FRUs and compatibility matrixes, LEDs, and
cables.
This preface includes the following topics about the documentation:
•
Audience.
•
Conventions.
•
Documentation feedback.
Audience
This documentation is intended for:
•
Network planners.
•
Field technical support and servicing engineers.
•
Network administrators working with the S10500X-G switch series.
Conventions
The following information describes the conventions used in the documentation.
Command conventions
Convention
Description
Boldface Bold text represents commands and keywords that you enter literally as shown.
Italic Italic text represents arguments that you replace with actual values.
[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.
{ x | y | ... }
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
[ x | y | ... ]
Square brackets enclose a set of optional syntax choices separated by vertical bars,
from which you select one or none.
{ x | y | ... } *
Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select a minimum of one.
[ x | y | ... ] *
Asterisk marked square brackets enclose optional syntaxchoices separated by vertical
bars, from which you select one choice, multiple choices, or none.
&<1-n> The argument or keyword and argument combination before the ampersand (&) sign
can be entered 1 to n times.
# A line that starts with a pound (#) sign is comments.
GUI conventions
Convention
Description
Boldface Window names, button names, field names, and menu items are in Boldface. For
example, the New User window opens; click OK.
>
Multi-level menus are separated by angle brackets. For example, File > Create >

Convention
Description
Folder.
Symbols
Convention
Description
WARNING!
An alert that calls attention to important information that if not understood or followed
can result in personal injury.
CAUTION:
An alert that calls attention to important information that if not understood or followed
can result in data loss, data corruption, or damage to hardware or software.
IMPORTANT:
An alert that calls attention to essential information.
NOTE:
An alert that contains additional or supplementary information.
TIP:
An alert that provides helpful information.
Network topology icons
Convention
Description
Represents a generic network device, such as a router, switch, or firewall.
Represents a routing-capable device, such as a router or Layer 3 switch.
Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that
supports Layer 2 forwarding and other Layer 2 features.
Represents an access controller, a unified wired-WLAN module, or the access
controller engine on a unified wired-WLAN switch.
Represents an access point.
Represents a wireless terminator unit.
Represents a wireless terminator.
Represents a mesh access point.
Represents omnidirectional signals.
Represents directional signals.
Represents a security product, such as a firewall, UTM, multiservice security
gateway, or load balancing device.
Represents a security module, such as a firewall, load balancing, NetStream, SSL
VPN, IPS, or ACG module.
T
T
T
T

Examples provided in this document
Examples in this document might use devices that differ from your device in hardware model,
configuration, or software version. It is normal that the port numbers, sample output, screenshots,
and other information in the examples differ from what you have on your device.
Documentation feedback
You can e-mail your comments about product documentation to [e-mail].
We appreciate your comments.

i
Contents
Chassis··········································································································1
Chassis information············································································································································1
Chassis views ············································································································································1
Slot arrangement········································································································································4
Chassis specifications································································································································7
Weights and dimensions····························································································································7
Total power consumption···································································································································8
Heat dissipation··················································································································································9
Cooling·······························································································································································9
Availability and reliability··································································································································10
Environmental specifications····························································································································11
Noise································································································································································11
Rack·································································································································································11
Slide rails··························································································································································11
Modules·······································································································12
Naming conventions·········································································································································13
MPU naming conventions························································································································13
Service module naming conventions ·······································································································13
Switch fabric module naming conventions·······························································································14
MPUs ·······························································································································································14
LSEM1SUPA0/LSEM3SUPA0·················································································································14
LSEM1SUPB0/LSEM3SUPB0·················································································································17
400G interface modules···································································································································20
LSEM1CDQ2SF0/LSEM3CDQ2SF0 ·······································································································21
100G interface modules···································································································································22
LSEM1CGQ16SF0/LSEM3CGQ16SF0···································································································22
LSEM1CGQ36SF0/LSEM3CGQ36SF0···································································································25
40G interface modules·····································································································································27
LSEM1QGS16SF0/LSEM3QGS16SF0 ···································································································27
LSEM1QGS36SF0/LSEM3QGS36SF0 ···································································································28
25G interface modules·····································································································································30
LSEM1YGS48CQSF0/LSEM3YGS48CQSF0 ·························································································30
10G interface modules·····································································································································32
LSEM1TGS16GP32SD0··························································································································32
LSEM1TGS24SD0···································································································································34
LSEM1TGS48QSSF0/LSEM3TGS48QSSF0··························································································35
LSEM1TGS48SD0/LSEM2TGS48SD0····································································································37
LSEM1TGT48SD0···································································································································39
1G interface modules·······································································································································41
LSEM1GT24GP16TSSD0························································································································41
LSEM1GT48TS24QSSD0························································································································43
LSEM1GT48TSSD0·································································································································44
LSEM1GV48TSSD0·································································································································46
Switch fabric modules······································································································································48
LSEM1SF06B0/LSEM1SF06D0 ··············································································································48
LSEM1SF08C0········································································································································51
LSEM1SF12B0 ········································································································································53
Power supplies······························································································1
PSR1600B-12A-B··············································································································································1
View ···························································································································································1
Technical specifications·····························································································································1
LEDs ··························································································································································2
PSR1600-54A-B·················································································································································3
View ···························································································································································3
Technical specifications·····························································································································3

ii
LEDs ··························································································································································4
PSR2000-12D-B ················································································································································4
View ···························································································································································4
Technical specifications·····························································································································5
LEDs ··························································································································································6
Fan trays ·······································································································7
FAN-80B-4-A······················································································································································7
View ···························································································································································7
Technical specifications·····························································································································7
LEDs ··························································································································································8
FAN-80B-5-A······················································································································································9
View ···························································································································································9
Technical specifications·····························································································································9
LEDs ························································································································································10
FAN-80B-8-A····················································································································································11
View ·························································································································································11
Technical specifications···························································································································11
LEDs ························································································································································12
Cables·········································································································13
Console cable ··················································································································································14
DC power cord·················································································································································14
AC power cord ·················································································································································15
Ethernet twisted pair cable·······························································································································15
RJ-45 connector·······································································································································15
Cable pinouts···········································································································································15
Cable type················································································································································16
Pin assignments·······································································································································17
Making an Ethernet twisted pair cable·····································································································18
Optical fiber······················································································································································18
Optical fiber··············································································································································18
Optical fiber cable ····································································································································19
Patch cord················································································································································19
Pigtail cord ···············································································································································19
Fiber connector········································································································································19
Precautions··············································································································································20
SFP+ DAC cable··············································································································································20
SFP28 DAC cable············································································································································21
SFP28 AOC cable············································································································································21
QSFP+ DAC cable···········································································································································22
QSFP+ AOC cable···········································································································································22
QSFP28 DAC cable·········································································································································22
QSFP28 AOC cable·········································································································································23
QSFP+ to SFP+ DAC cable·····························································································································23
QSFP28 to SFP28 DAC cable·························································································································24
QSFP-DD copper cable ···································································································································24

1
Chassis
H3C S10500X-G switch series is a set of core switching products designed for the cloud computing
data centers. It uses the advanced multi-stage multi-plane CLOS architecture to deliver the
industry's highest switching performance, port density, availability, and most abundant cloud
computing features.
Chassis information
Chassis views
H3C S10500X-G switch series includes the S10506X-G, S10506X-G-PoE, S10508X-G, and
S10512X-G models.
NOTE:
•
The chassis view figures are for illustration only.
•
The terms "MPU" and "supervisor engine unit" are used interchangeably in this document.
•
Unless otherwise stated, the term "module" collectively refers to MPUs, service modules, and
switch fabric modules.
Figure 1 S10506X-G front and rear panels
(1) MPU section
(2) Service module section
(3) Switch fabric module section
(4) Power supply section
(5) Fan tray section
(6) Power switches

2
Figure 2 S10506X-G-PoE switch front and rear panels
(1) MPU section
(2) Service module section
(3) PoE power supply section
(4) Switch fabric module section
(5) Power supply section
(6) Fan tray section
(7) Power switches
Figure 3 S10508X-G switch front and rear panels
(1) MPU section
(2) Service module section
(3) Switch fabric module section
(4) Power supply section
(5) Power switches
(6) Fan tray section

3
Figure 4 S10512X-G front and rear panels
(1) MPU section
(2) Service module section
(3) Switch fabric module section
(4) Power supply section
(5) Fan tray section
(6) Power switches
The switch has an MPU section, service module section, switch fabric module section, power supply
section, and fan tray section. You must configure components in these sections.
Table 1 Description for the switch sections
Section Installation description
MPU section
No MPUs are provided with the switch.
The switch has two MPU slots. You can install one MPU, or two MPUs for
redundancy. To install only one MPU for the switch, you can install it in either
of the MPU slots. Install a filler panel in the empty MPU slot.
Service module section
No service modules are provided with the switch.
•S10506X-G/S10506X-G-PoE—6 service module slots. Select the service
module model and quantity as are needed.
•S10508X-G—8 service module slots. Select the service module model
and quantity as are needed.
•S10512X-G—12 service module slots. Select the service module model
and quantity as needed.
You can install a service module in any of the service module slots. Install a
filler panel in each empty service module slot.
Power supply section
No power supplies are provided with the switch.
•S10506X-G—4 power supply slots, on the right side of the rear panel.
•S10506X-G-PoE—4 power supply slots and 8 PoE power supplyslots on
the left and rights sides of the rear panel.
•S10508X-G—6 power supply slots, on the right side of the rear panel.
•S10512X-G—8 power supply slots, on the right side of the rear panel.
The switch supports N+N (dual power inputs) and N+1 (single power input)
power redundancy. Determine the number of power supplies based on power
supply mode and the system power consumption.

4
Section Installation description
You can install a power supply in any of the power supply slots. Install a filler
panel in each empty power supply slot.
Switch fabric module
section
No switch fabric modules are provided with the switch.
•S10506X-G/S10506X-G-PoE—Install 1 to 4 switch fabric modules.
•S10508X-G—Install 1 to 6 switch fabric modules.
•S10512X-G—Install 1 to 6 switch fabric modules.
Install a filler panel in each empty switch fabric module slot.
Read the priority instructions about switch fabric module slots on the rear
panel of the chassis. Insert switch fabric modules according to the priorities.
Each fan tray covers two switch fabric module slots. Before you replace a
switch fabric module, remove the fan tray that covers it.
Fan tray section
No fan trays are provided with the switch.
•S10506X-G/S10506X-G-PoE—Two fan tray slots FAN 1 and FAN 2.
•S10508X-G—Three fan tray slots FAN 1, FAN 2, and FAN 3.
•S10512X-G—Three fan tray slots FAN 1, FAN 2, and FAN 3.
You must install a fan tray in each slot.
Power switches To power on the switch, turn on both power switches.
To power off the switch, turn off both power switches.
Slot arrangement
Table 2 Slot quantity for the removable components
Item S10506X-G S10506X-G-PoE S10508X-G S10512X-G
MPU slots 2 2 2 2
Service module
slots 6 6 8 12
Switch fabric
module slots 4 4 6 6
Power supply slots 4 4+8 6 8
Fan tray slots 2 2 3 3

5
Figure 5 S10506X-G switch slot arrangement
Figure 6 S10506X-G-PoE switch slot arrangement
Figure 7 S10508X-G switch slot arrangement
Slot 1
Slot 0
Slot 3
Slot 2
Slot 4
Slot 5
Slot 6
Slot 7
Slot 8
Slot 9
Slot 10
Slot 11
PWR
1
PWR
2
PWR
3
PWR
4
FAN 1 FAN 2
MPU slot
Service module slot
Switch fabric module slot
Power supply slot
Fan tray slot
Slot 1
Slot 0
Slot 3
Slot 2
Slot 4
Slot 5
Slot 6
Slot 7
PWR
1
PWR
2
PWR
3
PWR
4
Slot 8 Slot 9
Slot 10
Slot 11
PWR-
PoE 1
PWR-
PoE 2
PWR-
PoE 3
PWR-
PoE 4
PWR-
PoE 5
PWR-
PoE 6
PWR-
PoE 7
PWR-
PoE 8
FAN 1 FAN 2
MPU slot
Service module slot
Switch fabric module slot
Power supply slot
Fan tray slot
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
Slot 7
Slot 8
Slot 9
Slot 0Slot 1
Slot 8
Slot 9
Slot 10
Slot 11 Slot 12
Slot 13
PWR
1
PWR
2
PWR
3
PWR
4
PWR
5
PWR
6
FAN 1FAN 2FAN 3
MPU slot
Service module slot
Switch fabric module slot
Power supply slot
Fan tray slot

6
Figure 8 S105012X-G switch slot arrangement
Table 3 describes the slots for the removable components.
Table 3 Slots for the removable components
Model MPU Service
module Switch fabric module Power supply Fan tray
S10506X-G Slots 0 and 1 Slots 2 to 7
Slots 8 to 11
Slots 8 and 9 are
covered by FAN 1.
Slots 10 and 11 are
covered by FAN 2.
PWR 1 to PWR
4 FAN 1 and FAN 2
S10506X-G-
PoE Slots 0 and 1 Slots 2 to 7
Slots 8 to 11
Slots 8 and 9 are
covered by FAN 1.
Slots 10 and 11 are
covered by FAN 2.
•PWR 1 to
PWR 4
•PWR-PoE
1 to
PWR-PoE
8
FAN 1 and FAN
2
S10508X-G Slots 0 and 1 Slots 2 to 9
Slots 10 to 15
Slots 10 and 11 are
covered by FAN 1.
Slots 12 and 13 are
covered by FAN 2.
Slots 14 and 15 are
covered by FAN 3.
PWR 1 to PWR
6 FAN 1 to FAN 3
S10512X-G Slots 0 and 1 Slots 2 to 13
Slots 14 to 19
Slots 14 and 15 are
covered by FAN 1.
Slots 16 and 17 are
covered by FAN 2.
Slots 18 and 19 are
covered by FAN 3
PWR 1 to PWR
8 FAN 1 to FAN 3
Slot 0
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
Slot 7
Slot 8
Slot 9
Slot 10
Slot 11
Slot 12
Slot 13
Slot 14
Slot 15
Slot 16
Slot 17
Slot 18
Slot 19
PWR 1
PWR 2
PWR 3
PWR 4
PWR 5
PWR 6
PWR 7
PWR 8
FAN 1FAN 2FAN 3
MPU slot
Service module slot
Switch fabric module slot
Power supply slot
Fan tray slot

7
Chassis specifications
Table 4 Chassis specifications
Item S10506X-G S10506X-G-PoE S10508X-G S10512X-G
Power supply
mode
•AC
•Low-voltage
DC
•High-voltage
DC
•AC
•Low-voltage
DC
•High-voltage
DC
•AC
•Low-voltage
DC
•High-voltage
DC
•AC
•Low-voltage
DC
•High-voltage
DC
Certification
•Safety
regulations
•EMC
standards
•Safety
regulations
•EMC
standards
•Safety
regulations
•EMC
standards
•Safety
regulations
•EMC
standards
MPU redundancy 1+1 1+1 1+1 1+1
Switch fabric
module
redundancy N+M N+M N+M N+M
Power supply
redundancy
•N+N
•N+1
•N+N
•N+1
•N+N
•N+1
•N+N
•N+1
Heat dissipation Air cooling Air cooling Air cooling Air cooling
Maximum number
of 400GE ports 12 12 16 24
Maximum number
of 100GE ports 216 216 288 432
Maximum number
of 40GE ports 216 216 288 432
Maximum number
of 25GE ports 288 288 384 576
Maximum number
of 10GE ports 288 288 384 576
Maximum number
of GE ports 288 288 384 576
Weights and dimensions
The switch uses modular design. Its weight includes the chassis (mounting brackets and filler panels
included) and its removable components. The total weight varies by the type and quantity of the
installed removable components,
Table 5 Chassis weights and dimensions
Model Net weight
(excluding
packaging)
Net weight
(including
packaging)
Max
weight
(fully
configured
)
Height Width Depth
S10506X-G 30.5 kg (67.24
lb) 39.0 kg (85.98 lb) < 85 kg (187.39 lb) Excluding packaging
442 mm
440 mm (17.32
520

8
(17.40 in)/10
RU
in)
mm
(20.47
in)
Including packaging
615 mm
(24.21 in) 690 mm (27.17 in)
795
mm
(31.30
in)
S10506X-G-
PoE 33.0 kg (72.75 lb) 40.5 kg (89.29 lb) < 95 kg (209.44 lb)
Excluding packaging
442 mm
(17.40 in)/10
RU
440 mm (17.32
in)
520
mm
(20.47
in)
Including packaging
615 mm
(24.21 in) 690 mm (27.17 in)
795
mm
(31.30
in)
S10508X-G 46.5 kg
(102.51 lb) 80.5 kg (177.47 lb) < 130 kg (286.60 lb)
Excluding packaging
531 mm
(20.91 in)/12
RU
440 mm (17.32
in)
640
mm
(25.20
in)
Including packaging
890 mm
(35.04 in) 750 mm (29.53 in)
950
mm
(37.40
in)
S10512X-G 58.5 kg
(128.97 lb) 95.0 kg (209.44 lb) < 180 kg (396.83 lb)
Excluding packaging
796 mm
(31.34 in)/18
RU
440 mm (17.32
in)
640
mm
(25.20
in)
Including packaging
1158 mm
(45.59 in) 750 mm (29.53 in)
950
mm
(37.40
in)
NOTE:
•
Rack Unit (RU) is a measurement unit used to indicate the height of a rack. 1 RU is equal to
44.45 mm (1.75 in).
•
Table 3 lists dimensions for the switch, excluding the mounting brackets, cable management
brackets, modules, and power supplies.
Total power consumption
The total power consumption of a switch is the sum of the power consumptions of all running
modules and fan trays, depending on the type and quantity of the modules installed and the power
consumption of the fan trays. The total power consumption can be calculated as follows:

9
•
Minimum total power consumption of the switch = Minimum total power consumption of the
modules + minimum power consumption of the fan trays.
•
Typical total power consumption of the switch = Typical total power consumption of the modules
+ typical power consumption of the fan trays.
•
Maximum total power consumption of the switch = Maximum total power consumption of the
modules + maximum power consumption of the fan trays.
For example, for an S10506X-G switch that has two LSEM1SUPA0 MPUs, two LSEM1GT48TSSD0
service modules, two LSEM1SF06D0 switch fabric modules, and two FAN-80B-4-A fan trays:
•
The minimum total power consumption of the switch is 2 × 22 + 2 × 28 + 2 × 55 + 2 × 30 = 270
W.
•
The typical total power consumption of the switch is 2 × 23 + 2 × 47 + 2 × 63 + 2 × 100 = 466 W.
•
The maximum total power consumption of the switch is 2 × 30 + 2 × 55 + 2 × 95 + 2 × 230 = 820
W.
Heat dissipation
Heat dissipation is measured in BTU/h, and 1 W equals 3.4121 BTU/h.
The heat dissipation of a switch depends on its power consumption. To calculate heat dissipation of
the switch, assume 90% power consumption is converted to heat, and the conversion efficiency of
the power supplies is 90%. Heat dissipation/hour of the switch is [ 0.9 × (total power consumption of
the modules plus power consumption of the fan trays) ] /0.9 × 3.4121.
Table 6 Heat dissipation
Switch module Heat dissipation (BTU/H)
S10506X-G/S10506X-G-PoE 10216
S10508X-G 14843
S10512X-G 121405
Cooling
For adequate ventilation and heat dissipation, make sure the following requirements are met:
•
Make sure the airflow of the chassis matches the airflow direction of the installation site.
•
Reserve a minimum clearance of 30 cm (11.81 in) around the inlet and outlet air vents.
•
Make sure the rack for the switch has a good cooling system.
•
Make sure the installation site has a good cooling system.

10
Figure 9 Airflow through an S10506X-G switch
(1) Chassis air intake direction
(2) Chassis air outlet direction
Availability and reliability
Table 7 S10500X-G switch availability and reliability
Switch model Availability Availability Mean Time Between Failures
(MTBF)
Mean Time To
Repair (MTTR)
S10506X-G/S10506X-
G-PoE 0.9999984 36.5 years 0.5 hours
S10508X-G 0.999998 32.5 years 0.5 hours
S10512X-G 0.9999973 21.0 years 0.5 hours

11
Environmental specifications
Table 8 Environmental specifications
Description Operating Storage
Temperature 0°C to 45°C (32°F to 113°F) –40°C to +70°C (–40°F to +158°F)
Relative humidity
(noncondensing) 5% to 95% 5% to 95%
Altitude
–60 m to +5000 m (–196.85 ft to
+16404.20 ft)
From 0 m (0 ft), the maximum operating
temperature decreases by 0.33°C
(32.59°F) for every 100 m (328.084 ft)
increase in altitude.
–60 m to +5000 m (–196.85 ft to
+16404.20 ft)
Noise
The switch uses fan trays that can automatically adjust the fan speed based on the switch
temperature. The sound pressure levels vary by fan speed. For more information, see Table 11.
Table 9 Sound pressure levels
Switch model Fan tray model Sound pressure level in the acceptable
temperature range
Sound pressure level
when the fan tray
operates at full speed
S10506X-G/S10506X-G-P
oE (fully configured with
fan trays) FAN-80B-4-A 57.7 dBA 79.1 dBA
S10508X-G (fully
configured with fan trays) FAN-80B-5-A 58.6 dBA 81.9 dBA
S10512X-G (fully
configured with fan trays) FAN-80B-8-A 62.1 dBA 82.6 dBA
NOTE:
The sound pressure levels are measured
based on the method specified in ISO 7779
at bystander
positions.
Rack
The switch can be installed in a 19-inch standard rack. For information about how to select and install
a rack, see Universal Cabinet and Accessories Installation Guide.
Slide rails
No slide rails are shipped with the switch. Select slide rails for the switch as required. Table2-5
describes the slide rails available for the switch.

12
Table 10 Slide rails available for the switch
Item LSEM1BSR RL-1U-A LSXM1BSR
Part No. 0231AJAP 0231AJE5 0231A4EK
Adjustmen
t range 380 mm to 630 mm (14.96 in to 24.80 in) 380 mm to 630 mm (14.96 in to 24.80 in) 630 mm to 900 mm (24.80 in to 35.43 in)
Load
bearing
capacity 100 kg (220.46 lb) 200 kg (440.92 lb) 400 kg (881.83 lb)
Occupied
space N/A 1 U 1 U
Applicable
rack depth 0.6 m (1.97 ft), 0.8 m (2.62 ft) 0.6 m (1.97 ft), 0.8 m (2.62 ft) 1.0 m (3.28 ft), 1.2 m (3.94 ft)
Applicable
switch
model
S10506X-G/S10506X-G-
PoE All S10500X-G switch models All S10500X-G switch models
NOTE:
The
applicable rack depths in Table2-5 are for your reference only. Before you install slide rails,
make sure the rack depth is in the adjustment range of the slide rails.
Modules
The switch supports varieties of modules that are different in power consumptions. For a same
module, the power consumption varies by its state.
•
The minimum power consumption of a module refers to the power consumed by the module
when it is running with all its ports down and its fiber ports not installed with transceiver
modules.
•
The typical power consumption of a module refers to the power consumed by the module when
it is running with 50% of its ports connected and at 50% load.
•
The maximum power consumption of a module refers to the power consumed by the module
when it is running with all of its ports connected and at full load.
NOTE:
Module dimensions are expressed
in the Height (H) × Width (W) × Depth (D) format:
•
Height—Height of the front panel of the module.
•
Width—Width of the front panel of the module.
•
Depth—Depth from the front panel of the module to the connecto
r (Including the connector, but
excluding the ejector levers and captive screws).
NOTE:
For transceiver modules and cables
available for a module, see H3C S10500X-G Switch Series
Cards and Transceiver Modules Compatibility Matrixes.

13
Naming conventions
MPU naming conventions
Figure 10 MPU naming conventions
Table 11 MPU naming conventions
No. Description
1 Product line. LS represents the switch product line.
2 Product series. Erepresents the S10500X-G switch series.
3 Distinguisher.
4 Module type. Values include MPU, SRP, or SUP.
5 MPU type.
6 Extended attributes.
Service module naming conventions
Figure 11 Service module naming conventions
Table 12 Service module naming conventions
No. Description
1 Product line. LS represents the switch product line.
2 Product series. Erepresents the S10500X-G switch series.
3 Distinguisher.
4 Primary interface rate of the service module.
5 Primary interface type of the service module.
6 Primary interface quantity of the service module.
7 Secondary interface type of the service module (optional).
8 Service module type.
9 Extended attributes.
LS E M1 SUP A0
1 2 3 4 5 6
LS E M3 TG S 48 QS SF 0
12 3 7
46
58 9