Habitat Fleur Mirror PK 1.2 User manual

Fleur
Fleur Mirror PK 1.2
210936
FLEU-4M-S13-B
1

Components
Please check you have all the parts listed below
Retain batch code label
BC
Body
2
Mirror

Components -Fittings
Please check you have all the fittings listed below
Tools required
Before assembling the furniture please identify all component parts.
Keep children and animals away from the work area,small parts could choke if swallowed.
Assemble the item as close to its final position (in the same room) as possible.
Make sure you have enough space to layout the parts before starting.
Assemble on a soft level surface to avoid damaging the unit or your floor.
We do not recommend the use of power drill/drivers for inserting screws, as this could
damage the unit. Only use hand screwdriwers.
Dispose of all packaging carefully and responsibly.
IMPORTANT - PLEASE READ THESE INSTRUCTIONS FULLY BEFORE STARTING ASSEMBLY
Screw x 2 Hex key x 1 (4mm.) Silicone Pads x 4
Grain stickers x 2
3

Assembly instructions
Step 2
Attach silicone pads C
under the legs.
4
Step1
Using Hex-key B attach
legs to the body
with 8 screws.
x2

x 1
x 1
x 1
Step 3 Step 4

Care instructions
Regular dusting with a dry cloth will keep your units clear.
Clean marks with a damp cloth.
Do not allow spillages to stay on the surface for long.
Do not use abrasive cleaners.
Do not clean with products containing the following:
Acetone, (e.g. nail varnish remover).
Ammonia (e.g.bleach). or Sodium hydroxide (e.g. Caustic soda, drain and oven cleaners).
Use place mats to protect the surface from moisture and heat.
If for any reason you should have problems
with your Habitat product, pleace contact the store
from which you purchased it.
Please retain your receipt as proof of purchase.
If you have any comments or
suggestions regarding this product, assembly instructions or
service, pleace contact the store or
Habitat Head Office via its web site:
www.habitat.co.uk
or write directly to:
Habitat Retail Ltd.
489-499 Avebury Boulevard,
Milton Keynes MK9 2NW
6