Habitat Ipanema Bar 846/9760 User manual

Issue 1 - 26/02/20
Spare Parts
www.argos-support.co.uk
[e-mail]
0370 112 1928
Customer Support
0345 640 2020
Ipanema Bar

2
Safety and Care Advice
Product Details
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough space
to layout the parts before
starting.
Care and maintenance
Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
• From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Additional Guidance
● Assemble all parts and bolts loosely during assembly, only once the product is complete should you
fully tighten the bolts.
● Regularly check and ensure that all bolts and fittings are tightend properly.
● Age recommendation for upper bunk 18+
● Maximum user weight 50kg
● This product is compliant EN581
• This product has been constructed to
be used in the domestic environment
only and not for commercial purposes.
Assemble on a soft level
surface to avoid damaging the
Assemble the item as close
room) as possible.
Registered office: Habitat Retail Limited, 489-499 Avebury Boulevard, Milton Keynes MK9 2NW.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
Ipanema bar bistro set-yellow 846/9760
Ipanema bar bistro set-grey 933/4966
IMPORTANT, RETAIN FOR FUTURE
REFERENCE: READ CAREFULLY.

Bag 1
Fittings
3
A
C
M8x20mm Screw x 12 Allenkey x 1
B
M8x12mm Footcapx 4

Parts
123
Connector x 1 Table Leg x 1 Table Top x 1
4Base x 1
4

1
2
1
A
C
A
3
2
A
C
M8x20mm Screw x 12 Allenkey x 1
B
M8x12mm Footcap x 4
A
M8x20mm Screw x 4
C
Allenkey x 1
Allenkey x 1
x 4
A
C
M8x20mm Screw x 12 Allenkey x 1
B
M8x12mm Footcap x 4
A
M8x20mm Screw x 4
C

A
D
3
4
A
M8x20mm Screw x 4
C
Allenkey x 1
After all the parts are positioned,
you can now fully tighten all screws
fixed on previous steps.
4
Assembly is complete
IMPORTANT
On a regular basis please check
that the screws and fittings have
not become loose as this could
present a potential choke hazard.
A
C
M8x20mm Screw x 12 Allenkey x 1
B
M8x12mm Footcap x 4
B
M8x20mm Footcap x 4
B