Habitat FLEU-3W-S13-B User manual

Fleur
Chest of Drawers
PK-1.2
210927
FLEU-3W-S13-B
1
1 2
PKP PPPWW
P
P

Components
Please check you have all the parts listed below
Retain batch code label
BC
BC
Body Legs
2

Components -Fittings
Please check you have all the fittings listed below
Tools required
Before assembling the furniture please identify all component parts.
Keep children and animals away from the work area,small parts could choke if swallowed.
Assemble the item as close to its final position (in the same room) as possible.
Make sure you have enough space to layout the parts before starting.
Assemble on a soft level surface to avoid damaging the unit or your floor.
We do not recommend the use of power drill/drivers for inserting screws, as this could
damage the unit. Only use hand screwdriwers.
Dispose of all packaging carefully and responsibly.
IMPORTANT - PLEASE READ THESE INSTRUCTIONS FULLY BEFORE STARTING ASSEMBLY
Screw x 8 Hex key x 1 (4mm.) Felt x 4
Wall strap x 1 Grain stickers x 8
3

Assembly instructions
Step 2
Attach Felts
under the legs.
4
Step1
Using Hex-key B attach
legs to the body
with 8 screws.
C

Assembly Instructions
Step 3
a: To remove temporary
handles- unscrew the
ribbon. Screw and
ribbon can be discared.
b: Attach handles.
Remove!
x8
x8
x8
Step 4 Step 5