Habitat Large Trestle Table Desk 616/9639 User manual

Issue 1 - 26/02/20
SpareParts
www.argos-support.co.uk
[e-mail]
0370 112 192 8
Customer Support
0345 640 202 0
Large Trestle
Table Desk

1
Safety and Care Advice
Product Details
616/9639 Black
879/0044 White
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough space
to layout the parts before
starting.
Care and maintenance
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only clean using a damp cloth
and milddetergent. Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
•From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Additional Guidance
Assemble all parts and bolts loosely during assembly, only once the product is complete should you
fully tighten the bolts.
Maximum user weight 50kg
This product is compliant EN12521 & EN14749.
•Thisproduct has been constructed to
be used in the domestic environment
only and not for commercial purposes.
Assemble on a soft level
surface to avoid damaging the
Assemble the item as close
room) as possible.
ingdom, MK9 2NW,
N 2HT, registered
number: 03261722 (England and Wales). Both companies are subsidiaries of J Sainsbury's plc.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.

Bag 1
Fittings (Shown to scale)
2
D
A B
C
E F
12mm Bolt x 10
60mm Bolt x 2
Nut x 2 Spanner x 1
28mm Bolt x 8
32mm Bolt x 21
68mm Allen Key x 1
G

Hardware
3
1 2 3
4
7
5 6
Table top
(140 X 60 CM)
Bottom board x 2
(54.5 X 29.5 CM)
Frame x 4
(33 X 73.5 CM)
Cross bar x 2
(55 X 2 CM)
Cross bar x 4
(55 X 1.8 CM)
Cross bar x 4
(102 X 2 CM)
Supporting bar x 4
(74 X Ø0.6 CM)

Phillips screwdriver
(small & medium)
Phillips screwdriver
Rubber hammer
(small & medium) Eye protection
(when using a
hammer or glue)
Ruler/tape
measure
4
Tools required

5
1D
A B
C
E F
12mm Bolt x 10
60mm Bolt x 2
Nut x 2 Spanner x 1
28mm Bolt x 8
32mm Bolt x 21
68mm Allen Key x 1
G
A B
C
E
F
12mm Bolt x 10
Nut x 2
Spanner x 1
28mm Bolt x 8
32mm Bolt x 16
68mm Allen Key x 1
G
3
3
4
5
5
C
G
2x
2
BG
2x
A
E
F
2x
A
G
7
2x
A
a: b:
c: d:

2
Assemble is complete.
C
32mm Bolt x 5 68mm Allen Key x 1
G
6
G
D
C
G
1
3
6
D
60mm Bolt x 2