Habitat Manford Table User manual

Manford Table
Assembly Instructions - Please keep for future reference
Dimensions
Width - 90cm
Depth - 180cm
Height - 75cm
Important -Please read these instructions before assembly
If you need help or have damaged or missing parts, email:
[e-mail] or call: 0345 499 4686
121
THIS PRODUCT IS DESIGNED FOR INDOOR USE ONLY!
MANF-DT-AW18-A

Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Assemble the item as close to its
final position (in the same room) as
possible.
Do not place furniture directly in
front of radiators, fires or any other
source of heat.
12
Parts of the assembly
will be easier with 2
people.
Assemble on a soft level surface
to avoid damaging the unit or your
floor.
We do not
recommend the
use of power drill/
drivers for inserting
screws, as this could
damage the unit. Only use hand
screwdrivers.
Dispose of all packaging carefully and
responsibly.
Check you have all the
components and tools listed on
the front cover and pages 2 - 3.
Remove all fittings from the plastic
bags and separate them into their
groups.
Keep children and animals away
from the work area, small parts
could choke if swallowed.
Make sure you have enough space
to layout the parts before starting.
General care and maintenance
Take care when moving furniture -
dragging it across the floor will
loosen and damage the joints.
Always lift and move.
From time to time check that there
are no loose fittings. Tighten as
necessary.
Avoid exposing your furniture to
direct and prolonged periods of
sunlight and heat sources as fading
and cracking may occur.
Take care to prevent sharp objects e.g. toys,
buckles and heels from coming into contact
with your furniture, and avoid contact with
chemicals e.g. cosmetics or hair products
which may permanently mark the surface.
Cleaning and care Maximum weight limit
Dust regularly with a clean dry cloth.
Wipe up any spills immediately with a
damp cloth and then dry the surface
with a clean dry duster.
Repeat this procedure for periodic
cleaning.
Remove stubborn stains with a weak
washing up liquid solution and a
damp cloth and dry after with a clean
cloth.
The use of furniture polish or spray
is not necessary or recommended.
Never use abrasive or corrosive
cleaning agents.
Always use place mats and
coasters to protect the surface
from moisture and heat.
Important: Recommended
maximum loading.
General information
If for any reason you should have
problems with your Habitat product,
please contact the store from which
you purchased it.
Please retain your receipt as proof of
purchase.
If you have any comments or
suggestions regarding this product,
assembly instructions or service
received, please contact the store or
Habitat Head Office via its web site:
www.habitat.co.uk
or write directly to: Habitat Retail Ltd.
489-499 Avebury Boulevard,
Milton Keynes MK9 2NW
Max.
50kg
!
1

Components - Panels
Please check you have all the panels listed below
If you need help or have damaged or missing parts, email:
[e-mail] or call: 0345 499 4686
BC Note: There are 'Batch Code' lables where shown on the indicated items, these should be retained.
1. Top
2. Side frame x 2
3. Support Rail
BC
2

Components - Fittings
Please check you have all the panels listed below
Note: The quantities below are the correct amount to complete the assembly. In some
cases more fittings may be supplied than are required.
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120
Ruler - To help correctly identify the fixings
A
M6x15mm Bolts x 12
B
M6x50mm Bolts x 10
C
Ø11mm Spring washers x 22
D
Ø16mm Flat washers x 22
E
Allen key x 1
3
If you need help or have damaged or missing parts, email:
[e-mail] or call: 0345 499 4686
Fittings supplied in Pack 1 of 1
Felt Feet Pads x 8
F

Assembly Instructions
Step 1
Step 2
4
1
2
2
3
Ax 12
Bx 10
Cx 22
Dx 22
Ex 1
A
C
D
B
E
12
Take care when turning table upright.
This product is supplied with a pack of extra felt feet pads for
levelling up on uneven floors.
B