Habitat Rafa 952/0938 User manual

Rafa
Issue 1 - 14/05/21
Spare Parts
www.argos-support.co.uk
Customer Support
[email protected]
0370 112 1928
0345 640 2020

Safety and Care Advice
Product Details
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
2
4'6 Bed Charcoal fabric 952/0938
Minor stains and spillages
should be removed immediately
from cushion fabric, by wiping
over lightly with a damp cloth
and mild soapy water.
Light marking can also be
removed using this method.
To remove more stubborn
stains or marking, a good
quality proprietary domestic
fabric cleaner can be used,
although it should first be
tested on and inconspicuous
area of the fabric.
Cleaning Guidance
Sainsbury's Argos is a trading name of both: Argos Limited, Registered office: 489-499 Avebury Boulevard, Milton Keynes, United
Kingdom, MK9 2NW, registered number: 01081551 (England and Wales); and Sainsbury's Supermarkets Limited, Registered
office: 33 Holborn, London, EC1N 2HT, registered number: 03261722 (England and Wales). Both companies are subsidiaries of J
Sainsbury's plc. Argos (N.I.) Ltd, Forestside Shopping Centre, Upper Galwally, Belfast, United Kingdom, BT8 6FX. Argos Distributors
(Ireland) Limited, Unit7, Ashbourne Retail Park, Ballybin Road, Ashbourne, County Meath, Ireland.
4'6 Bed Natural fabric 949/2918
5' Bed Charcoal fabric 951/5802
5' Bed Natural fabric 953/7330

Fittings (Shown to scale)
33
8x40mm Bolt x 4
Nut x 4
17mm Flat washer x 20 12mm Spring washer x 12
A
E
D
C
8x20mm Bolt x 16
B

4
Parts
1Side rail x 2 (4'6-1930 × 260mm)
(5'-2030 × 260mm)
2 3 Headboard (4'6-1480 × 1100mm)
(5'-1630 × 1100mm)
4Central support (4'6-1925 × 40mm)
(5'-2025 × 40mm)
5
Footboard (4'6-1480 × 360mm)
(5'-1630 × 360mm)
6Bentwood slats x 30 (4'6-685 x 9 x 53mm)
Bentwood slats x 32 (5'-760 x 9 x 53mm)
7Double slat caps x 15 (4'6-55mm)
Double slat caps x 16 (5'-55mm)
8Single slat caps x 30 (4'6-55mm)
Single slat caps x 32 (5'-55mm)
Support Leg x 2 (25 × 225mm)
INSIDE
INSIDE
INSIDE

Ruler/tape
measure
Tools required
5mm Allen key
(Supplied)
Spanner
(Supplied)
5

6
1
2
3
1
2
Do not fully tighten fixings!
5mm Allen key x 1
D
C
A
D
C
A
3
2
1
31
A
Leave screws loose
17mm Flat washer x 12
C
8x20mm Bolt x 12
A
12mm Spring washer x 12
D
Turn
Product
Ensure surface is
protected to avoid marking .
8x40mm Bolt x 4
Nut x 4
17mm Flat washer x 20 12mm Spring washer x 12
A
E
DC
8x20mm Bolt x 16
B

Holes
facing up
4
3
4
A
C
J
8x20mm Bolt x 4
A
17mm Flat washer x 4
C
5mm Allen key x 1
Fully tighten all fixings.
7
Shown upside down
4
4
C
B
E
C
5mm Allen key x 1
B
17mm Flat washer x 4
C
Nut x 4
E
8x40mm Bolt x 4 Spanner x 1
5
5
5
Holes on underside
3
Turn
Product
Turn
Product
4

8
a:
b:
c:
8
6
4
7
6
1
6
8
4
6
6
8
8
7
Slats to arch upwards
1
1
6 6
4
8 8
7
5Repeat
x15
Repeat
x16
4'6
5'