Haier HPRD12HC5 User manual

®
PORTABLE AIR CONDITIONER
CLIMATISEUR PORTATIF
ACONDICIONADOR DE AIRE PORTATIL
Model#
Modèle#
Modelo#
HPRD12XC5
HPRD12HC5

A Word From Haier
Product Registration
TABLE
RECEPTACLE AND FUSE TYPES
RATED VOLTS
AMPS
WALL OUTLET
FUSE SIZE
TIME DELAY FUSE
(or circuit braker)
125/60 250/60
15 20 15 20 30
15 20* 15 20* 30
Plug Plug
Plug
Thank You for buying a dependable, energy saving and easy to operate HAIER air conditioner.
This manual contains useful information for you to maintain, operate, install and safely use your air
conditioner. Your air conditioner cleans, cools and dehumidifies the air in your room to provide
you with the ultimate level of comfort.
Please read instructions carefully before using the product. Also, do not forget to fill out and mail
the Product Registration Card.
Record Your Model and Serial Number.
For all your service calls during the warranty period the following information will be needed.
Attach the sales receipt to this guide and keep for future reference. This information can be
obtained from the serial plate, which is on your air conditioner.
Model Number: ......................................................................................................................
Serial Number:........................................................................................................................
Date of Purchase: ....................................................................................................................
Dealer’s Name:........................................................................................................................
Dealers Address: ....................................................................................................................
Dealers Phone Number: ..........................................................................................................
(1)
English

SAFETY PRECAUTIONS
WARNING: Following these basic precautions will reduce the risk
of fire, electrical shock, injury or death when using
your air conditioner.
1) Air conditioner must be connected to proper electrical outlet with the correct electrical
supply. (see table)
2) Proper grounding must be ensured to reduce the risk of shock and fire. DO NOT CUT OR
REMOVE THE GROUNDING PRONG. If you do not have a three-prong electric receptacle outlet
in the wall, have a certified electrician install the proper receptacle. The wall receptacle MUST be
properly grounded.
3) Do not operate air conditioner if power cord is frayed or otherwise damaged. Also avoid using it
if there are cracks or abrasion damage along the length, plug connector or if the unit malfunctions
or is damaged in any manner. Contact an authorized service for examination, repairs or
adjustments.
4) DO NOT USE AN ADAPTER OR AN EXTENSION CORD.
5) Do not block airflow around the air conditioner. Also the exhaust hose should be free of any
obstructions.
6) Always unplug the air conditioner before servicing it or moving it.
7) Do not install or use the air conditioner in any area where the atmosphere contains combustible
gases or where the atmosphere is oily or sulphurous. Avoid any chemicals coming in contact with
your air conditioner.
8) Do not place any object on the top of the unit.
9) Never operate the air conditioner without the filters in place.
10) Do not use the air conditioners near a bathtub, shower or wash basin.
(2)
English

Table Of Contents PAGE
A Word From Haier..................................................................................................................1
Product Registration ................................................................................................................1
Safety Precautions ..................................................................................................................2
Advantages ..............................................................................................................................4
Parts and Features ..................................................................................................................5
Assembly and Installation......................................................................................................6
Operation ..................................................................................................................................9
Product Specification ............................................................................................................12
Care and Cleaning ................................................................................................................12
Storage ....................................................................................................................................12
Trouble Shooting....................................................................................................................13
Warranty Information ..........................................................................................................14
(3)
English

Advantages of this Model
1. Unique dual-hose design, providing more powerful and faster cooling than the single-hose
design.
2. Adjustable airflow direction for convenient and effective cooling.
3. Heat and cool functions for HPRD12XH5.
4. This model is easy to operate. The electronic control panel has a timer, thermostat, three speed
cooling speeds, three fan speeds and one speed dehumidification function (dry).
5. This portable air conditioner does not require water to be added.
6. The unit has a unique design which evaporates the water. Therefore no condensation tank is
necessary, thus avoiding you to have to wake up in the middle of the night to empty the
bucket and turn on the unit.
7. Easy to install window kit is included which consists of the, exhaust hose, 2 hose nozzle, the
window panel kit, exhaust hose connector and cover for the exhaust hose connector.
8. Full directional casters are included to help to move the unit to be conveniently used in almost
any area.
9. The filter screen is designed for easily accessibility of the filter.
10. Portable air conditioners are easy to store when not in use.
(4)
English

Parts and Features
(5)
English
1. Control Panel
2. Cold Air Outlet
3. Signal Receptor
4. Transport Handle
5. Air Outlet Hose
6. Evaporator Air Intake
7. Air Intake Hose
8. Drain Port
9. Power Supply
Fig. 1

(6)
English
Assembly and Installation
IN DOOR
Assembly Instruction
A. Connect exhaust hose to the back of the unit. Extend hose to desired
length and connect with window kit.
USING EXHAUST DUCT SET
1. Insert ends of Exhaust hose into air outlet nozzle and Exhaust
duct “A” by twisting until it stops.
2. Fix the Exhaust duct “A” to the exhaust outlet on the rear of the
unit. This is achieved by sliding the appropriate connector
downward over the exhaust outlet ensuring that the lugs on the
outlet are engaged with the grooves on the connector.
3. The exhaust hose is snap-fit to the unit. To take it off, turn it
clockwise and remove.
Note: Air outlet hose should be mounted at right side
(see fig. 1)
4. Extend the Exhaust hose and close the Window as far as
possible trapping the air outlet nozzle.
B. Repeat same steps for the air intake hose.
USING WINDOW PANEL KIT
1. Air Inlet Hose - 1 set
2. Air Outlet Hose - 1 set
3. Window Exhaust Adapter - 2 pieces
4. Window/Patio Door Slider Kit - 1 set
1
2
3
4
Fig. 2
Window Kit Installation

(7)
English
Your window kit has been designed to fit most standard vertical and horizontal window applications.
However, it may be necessary for you to improvise/modify some aspects of the installation procedures for
certain type windows. Please refer to for minimum and maximum window openings.
Note: Window kit is just available for some models.
Installation Instruction
• Air outlet intake indoor side can not be blocked by curtains, or something alike.
• The end of air hose cannot be blocked by shutters or something alike.
• Do not bend the air hose when assembling, keep it straight.
• When appliance in cool or dry mode, condensate will concentrate in water box of chassis. When the
box is full, water full indicator glitters (red), LCD window appears the error sign E. The appliance will
stop running at the same time. Now the power supply should be shut, then pull out the rubber plug in
drain port underside the appliance, drain the water into a prepared container, or drain the water by
moving the appliance to a suitable place.
Note: Water should be drained out when the water full light is on. Otherwise, the appliance will
not work.
• Select the Best Location where there is beside the window, the door or the French window.
• Keep the required distance from the return air outlet to the wall or other obstacles at least 20”.
• Fix one end of the air hose on the air intake or outlet underside the appliance.
• Extend the air hose to insure another end of the air hose be taken in the clearance between
window, door, or French window, or wall hole.
• Air outlet or intake can not be blocked by protective grid or something alike.
• The distance between two ends of the air hose should be kept at 8” at least.
Note: The cooling capacity will decrease when using a single air hose.
Fig. 3

(8)
English
Installation Sequence
Before Starting this Unit
1. Select a suitable location, making sure you have easy access to an electrical outlet.
2. Install the flexible exhaust hose and adjustable window slider kit as depicted in Fig. 2 & 3.
Note:1. Step 2 is required only while using cooling or dry mode, in cooling mode you can
select to install two hoses or air outlet hose only, in dry mode you may install air
outlet hose only.
2. While running or installing the hoses cannot be blocked by curtains and so on.
3. Plug the appliance into a grounded electrical outlet. Please select an appropriate power supply basis
the nameplate.
Note: Do not use a regular extension cord.
4. To turn the appliance on, press ON/OFF button.

(9)
English
Operation
NOTE: Wait for 24 hours to turn on air conditioner if the unit has been tilted for any
reason. This is for the oils and the coolants to settle and level off.
1. Wait for 3 minutes before restarting the unit after a normal shut down so as to complete the
compressor cycle.
2. Use an 115v 15 amp outlet for the air conditioner. Do not use any other electrical appliances on
this line or you may trip the fuse. Use a dedicated line for this air conditioner.
3. Do not place the air conditioner in direct sunlight or close to any heating appliances.
ex. baseboard heaters, stoves, etc.
4. Operate on a flat surface only.
5. Keep the unit free of any obstructures such as drapes, curtains, blinds, etc.
6. Keep unit at least 1 foot away from the wall.
7. Check and clean the filter once every week to get the highest efficiency.
NOTE: Do not use unit without filter.
8. If the unit is not being used for a long period of time remove the plug from the water drain pipe
and drain out any condensed water.
When turning on the unit first time after plugging it into an electrical outlet the unit will start in a low
fan cool mode. The temperature read out on the LED will be the room temperature. When
turning on the unit in regular usage it will remember the last shut off setting.