Haier HSU-09LG03 User manual

No.0010550482

UV light degerming
device (inside)
CHANGE-FOR-FRESH-AIR BOX
CHANGE-FOR-FRESH-AIR TUBE
CHANGE FOR FRESH AIR SIGNAL WIRE
The indicator light will be displayed as the figure under
different operation models

,
FRESH
STERILIZE
UV light degerming function display
STERILIZE
31
31. FRESH button
Used to set FRESH AIR operation.
Use to set UV light degerming function
Singnal sending display

FRESH
STERILIZE

FRESH
STERILIZE
Health anion function
Air conditioner starts health anion function operation.
For twice press, disappears,the operation stops.
UV light degerming function
Press STERILIZE button ," "and ""displayed on the remote
controller and the air conditioning starts the UV light degerming
function.
"": For timing operation of UV light degerming function and
automatically canceled after 30 minutes' operation.
"": For the long-time running of UV light degerming function.
No display: For UV light degerming function not starting.
Change-for-fresh-air function
Press FRESH button , " "displayed on the remote
controller and the change-for-fresh-air function operation begins.
For twice press , the display " "disappears and the
change-for-fresh-air function operation is canceled
BRIEF INTRODUCTION TO HEALTH ANION FUCTION
UV light emitted by the UV light device of the indoor unit catalytically
activates the nano TiO2 on the multi-lights touching intermediary , and the
degerming effect is highly efficient and lasting.
Note: when the function is running, don't open the inlet grille.
About UV light degerming function
1.After the change-for-fresh-air function is initiated, the outside air can enter the
indoors through the change-for-fresh-air tube thereby keeping the indoor air fresh.
About change-for-fresh-air function
2.Setting the change-for-fresh-air function under the shutdown status:
Under shutdown status, press the new wind key and the remote controller displays
the on status of air flow, low wind, and change-for-fresh-air functions, and now
can set the timing open, timing close and time control switch.
Press on-off button to cancel the change-for-fresh-air function.
.
Health function includes health anion function, UV light
degerming function and change-for-fresh-air function.

FRESH
STERILIZE

FRESH
STERILIZE

.
FRESH
STERILIZE

FRESH
STERILIZE

FRESH
STERILIZE

FRESH
STERILIZE

3more rises
FRESH
STERILIZE
If the wind speed is high or middle before
setting for the sleep, set for lowing the wind
speed after sleeping.
If it is low wind, no change.
5.Set the wind speed change when sleeping

STERILIZE
FRESH

FRESH
STERILIZE

Health airflow Operation
FRESH
STERILIZE