Haier HCE604TB Mounting instructions

NZ AU
Installation instructions
and User guide
Touch control
ceramic glass cooktop
HCE604TB model

1
Contents
Safety and warnings 2
Installation instructions 6
Introduction 12
Using your cooktop 14
Cooking guidelines 23
Care and cleaning 26
Troubleshooting 28
Warranty and service 30
Important!
SAVE THESE INSTRUCTIONS
The models shown in this user guide may not be available in all markets and are
subject to change at any time. For current details about model and specification
availability in your country, please visit our local website listed on the back cover
or contact your local Haier dealer.

2Safety and warnings
Your safety is important to us. Please read this information before using your cooktop.
Installation
WARNING!
Electrical Shock Hazard
Disconnect the appliance from the mains electricity supply before carrying
out any work or maintenance on it.
Connection to a good earth wiring system is essential and mandatory.
Alterations to the domestic wiring system must only be made by a qualified
electrician.
Failure to follow this advice may result in electrical shock or death.
WARNING!
Cut Hazard
Take care – panel edges are sharp.
Failure to use caution could result in injury or cuts.

3
Safety and warnings
Important safety instructions
Read these instructions carefully before installing or using this appliance.
No combustible material or products should be placed on this appliance at any time.
Please make this information available to the person responsible for installing the appliance as it
could reduce your installation costs.
In order to avoid a hazard, this appliance must be installed according to these instructions for
installation.
This appliance is to be properly installed and earthed only by a suitably qualified person.
This appliance should be connected to a circuit which incorporates an isolating switch providing
full disconnection from the power supply.
Failure to install the appliance correctly could invalidate any warranty or liability claims.

4Safety and warnings
Operation and maintenance
WARNING!
Hot Surface Hazard
During use, accessible parts of this appliance will become hot enough to
cause burns.
Do not let body, clothing or any item other than suitable cookware contact
with the ceramic glass until the surface is cool.
Never leave metal objects on the cooktop as they can become hot very
quickly.
Keep children away.
Handles of saucepans may be hot to touch. Check saucepan handles do not
overhang other cooking zones that are on. Keep handles out of reach of
children.
Failure to follow this advice could result in burns and scalds.
WARNING!
Electrical Shock Hazard
Do not cook on a broken or cracked cooktop. If the cooktop surface should
break or crack, switch the appliance off immediately at the mains power
supply (wall switch) and contact a qualified technician.
Switch the cooktop off at the wall before cleaning or maintenance.
Failure to follow this advice may result in electrical shock or death.
WARNING!
Cut Hazard
The razor-sharp blade of a cooktop scraper is exposed when the safety
cover is retracted. Use with extreme care and always store safely and out
of reach of children.
Failure to use caution could result in injury or cuts.
WARNING!
Fire Hazard
Never leave the appliance unattended when in use. Boilover causes smoking
and greasy spillovers that may ignite.
Never use your appliance for warming or heating the room.
Failure to follow this advice may result in serious injury.

5
Important safety instructions
Never leave the appliance unattended when in use. Boilover causes smoking and greasy
spillovers that may ignite.
Never use your appliance as a work or storage surface.
Never leave any objects or utensils other than suitable cookware on the appliance.
Never use your appliance for warming or heating the room.
Do not allow children to play with the appliance or sit, stand or climb on it.
Do not store items of interest to children in cabinets above the appliance. Children climbing on
the cooktop could be seriously injured.
Do not leave children alone or unattended in the area where the appliance is in use.
Children or persons with a disability which limits their ability to use the appliance should have a
responsible and competent person to instruct them in its use. The instructor should be satisfied
that they can use the appliance without danger to themselves or their surroundings.
Do not repair or replace any part of the appliance unless specifically recommended in the
manual. All other servicing should be done by a qualified technician.
Do not use a steam cleaner to clean your cooktop.
Do not place or drop heavy objects on your cooktop.
Do not stand on your cooktop.
Do not use pans with jagged edges or drag pans across the ceramic glass surface as this can
scratch the glass.
Do not use scourers or any other harsh/abrasive cleaning agents to clean your cooktop, as these
can scratch the ceramic glass.
If the power supply cable is damaged, it must only be replaced by a qualified technician.
Do not operate your cooktop by means of an external timer or separate remote-control system.
Safety and warnings

6
Installation instructions
Cooktop and cutout dimensions Electrical connection is
made at the middle rear
Drawings for illustration purposes only
A
B
CCI
D
G
F
E
Cooktop and cutout dimensions (mm)
HCE604TB
Aoverall width of cooktop 590
Boverall depth of cooktop 510
Cheight of chassis (below top of bench) 45
CIheight of chassis incl. terminal block (below top of bench) 58
Dwidth of chassis 552
Edepth of chassis 480
Foverall width of cutout 560
Goverall depth of cutout 490

7
Installation instructions
Clearances
A
B
C
C
E
D
Clearances (mm)
HCE604TB
Aminimum clearance from rear edge of cutout to:
nearest combustible surface 55
Bminimum clearance from glass surface to:
rangehood 650
Cminimum clearance from side edges of cutout to:
nearest combustible surface 85
Dminimum clearance from benchtop to:
overhead cabinet not directly above the cooktop 450
Eminimum clearance below top of benchtop to:
thermal protection barrier 65
Drawings for illustration purposes only

8
Installation instructions
Before you install the cooktop, make sure that
the benchtop is square and level, and no structural members interfere with space requirements
the benchtop is made of a heat-resistant material
the cooktop will not be installed directly above a dishwasher, as the humidity may damage the
cooktop electronics
the installation will comply with all clearance requirements and applicable standards and
regulations
A suitable disconnection switch must be incorporated in the permanent wiring, mounted and
positioned to comply with the local wiring rules and regulations. The switch must be of an
approved type installed in the fixed wiring and provide a 3 mm air gap contact separation in all
poles in accordance with the local wiring rules.
In Australia and New Zealand, a switch of the approved type with a 3 mm air gap must be
installed in the active (phase) conductor of the fixed wiring.
the isolating switch will be easily accessible to the customer with the cooktop installed
you consult local building authorities and by-laws if in doubt regarding installation
you use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the wall surfaces
surrounding the cooktop.
When you have installed the cooktop, make sure that
the power supply cable is not accessible through cupboard doors or drawers
there is adequate flow of fresh air from outside the cabinetry to the base of the cooktop
if the cooktop is installed directly above an oven or its base is accessible through a cupboard
or drawer space after installation, a thermal protection barrier is installed below the base of the
cooktop (see Fig.1)
the isolating switch is easily accessible by the customer
you complete the ‘Final checklist’ at the end of these installation instructions.
The thermal protection barrier must be:
removable
heat-resistant
made from low thermal conductivity
material
at least 20 mm below the base of the
cooktop to ensure adequate ventilation
20 mm min.
Fig. 1 Thermal protection barrier
< Fresh air from
outside the
cabinetry

9
Installation instructions
Fastening the cooktop to the bench
1 Turn the cooktop upside down and place it on a soft surface.
2 Spread the seal around the edges of the ceramic glass with the adhesive side facing down,
making sure that the whole perimeter is sealed. Cut off any excess material.
3 Mount the supplied clamps (A) and screws (B) onto the cooktop, as shown (without tightening
the screws).
4 Place the cooktop into the cutout, then tighten the screws to clamp the cooktop securely to the
bench.
5 Using a sharp cutter or trimmer knife, trim the excess sealing material around the edge of the
cooktop. Take care not to damage the benchtop.
Note: if your bench is thicker than 40 mm, recess the underside to between 30 and 40 mm.
Fig. 2 Preparing the cooktop before installation
Fig. 3 Fastening the cooktop to the bench
A
A
A
AB
Seal
B
B
B
Adhesive side
30 mm min.
40 mm max.
A
B
Seal

10
Installation instructions
Connecting the cooktop to the mains power supply
Important!
This cooktop must be connected to the mains power supply only by a suitably qualified person.
This cooktop must be earthed.
Before connecting the cooktop to the mains power supply, check that:
1 the domestic wiring system is suitable for the power drawn by the cooktop
2 the voltage corresponds to the value given on the rating plate
3 the power supply cable sections can withstand the load specified on the rating plate.
To connect the cooktop to the mains power supply, do not use adapters, reducers, or branching
devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 75
o
C at any point.
Power supply
6000W @ 220-240/380-415V 2N~ (26.10A)
Connection diagrams
Fig. 4 Opening the terminal block cover
PE
1
2
3
4
5
N (L2)L1
220 - 240 V
220-240 V ~
1
2
3 5
4
N L2
PE
L1
1
2
3 5
4
PE
N
L1 L2
380-415 V 2N ~
Single-phase connection Two-phase connection
PE
1
2
3
4
5
380 - 415 V 2N
N
L2L1
Bridging links
removed

11
Final checklist
TO BE COMPLETED BY THE INSTALLER
Is the cooktop earthed?
Check that the power supply cable is NOT touching the base of the cooktop. This will ensure that
the cable is not damaged by heat from the cooktop.
Check that the power supply cable is not accessible via cupboard doors or drawers.
Is the cooktop clamped down securely?
Check that all the cooking zones function correctly. Turn on all of them to a high setting and
leave them on for at least one minute.
Are all elements glowing?
Are all touch controls and displays functioning?
To check that the ‘hot surface’ indicators function correctly, turn off all the cooking zones. Is H
displayed in all the cooking zone displays?
Have you shown the customer how to use the cooktop? Make sure you explain to the customer
about the ‘hot surface’ indicators. Encourage them to read the full user guide before using the
cooktop.
Installer’s name:
Installer’s signature:
Installation company:
Date of installation:
LEAVE THESE INSTRUCTIONS WITH THE CUSTOMER
Installation instructions

12
Touch
controls/
displays
Cooking
zone
Cooking
zone
Cooking
zone
Cooking
zone
About your new cooktop
Thank you for buying a Haier ceramic glass cooktop. This guide introduces you to all its special
features. We recommend you read the whole guide before using your new cooktop, for both
safety and cooking success.
For more information, visit our local website listed on the back cover.
Before using your new cooktop
Read this user guide, taking special note of the ‘Safety and warnings’ section.
Remove any protective film that may still be on your cooktop.
23
4
1
Introduction
Fig.5 Cooktop layout

13
Using the touch controls
The cooking zone displays also function as touch controls. To
select a cooking zone, simply touch its display. Use the ball of
your finger, not its tip. The controls respond to touch, so you
don’t need to apply any pressure.
Once you have selected a cooking zone, you have 10 seconds
to set it (while the little red light at the bottom right of the
display is on). If the little red light goes out before you have
had a chance to select a setting, simply re-select the cooking
zone by touching its display again.
Make sure the controls are always clean, dry, and there is no
object (eg a utensil or a cloth) covering them. Even a thin film
of water may make the controls difficult to operate.
Cooking Points
1 Hi-light cooking zone Ø 180 mm - 1800 W
2 Hi-light cooking zone Ø 140 mm - 1200 W
3 Hi-light cooking zone Ø 180 mm - 1800 W
4 Hi-light cooking zone Ø 140 mm - 1200 W
Controls
5 ON/OFF key
6 Left front zone (1) key and increasing power
7 Left rear zone (2) key and increasing power
8 Right rear zone (3) key and increasing power
9 Right front zone (4) key and increasing
power
10 Decreasing power key (for all cooking zones)
Display description
11 Cooking zone indicator
(near every zone key):
= Line
= Child lock
÷ = Zone power level
= Automatic heating
= Zone residual heat
Introduction
6 9
10
5
11
87

14
Using the touch controls
Each key indicates the relevant cooking zone.
The key is the same for all cooking zones
Display messages next to touch control keys

= Cooking zone turned OFF.

-= Power range of lighted cooking zone.

= Automatic heating (in alternation with the preset power level).

= Afterheat. It is cancelled when the temperature drops below 60 °C.

= Locked touch control - for children’s safety.
Using your cooktop
Turn ON and OFF touch control
Control keys for activation
and adjustment of cooking
zone power level

15
How to turn the touch control on and off
When first switching ON or after power failure, all displays and luminous point will be
blinking for 1 second and will then go out while the touch control will be put in stand-by.
Starting
Press the key and keep it pressed
until the touch control is lighted.
The 4 displays of the cooking zones read .
On all displays, the point at the bottom right
sight is blinking every second to indicate
that no cooking zone is turned ON
If a cooking zone is hot, the display reads
alternatively (hot) and .
When the safety key for children is activated,
all displays of the cooking zones will read
out (locked).
With the safety key for children activated,
when a cooking zone is hot, the display
reads out alternately (hot) and .
To unlock the safety key for children see the
relevant chapter.
Note: If a cooking zone is not turned ON
within 20 seconds after the touch control is
pressed, the touch control will switch off.
Switching off
The touch control may be switched OFF
at any time by pressing the key .
If any cooking zones are turned ON, they
will be turned OFF. The display of activated
cooking zones will read out (hot) until the
temperature drops below 60 °C.
Using your cooktop

16
Power ignition and adjustment of a cooking zone
To turn ON a cooking zone its touch control must be switched ON (see section “HOW TO
TURN THE TOUCH CONTROL ON AND OFF”).
Starting
1 Press the key to activate the cooking
zone to be lighted; then release the key.
The point of the selected zone on the bottom
right side of the display remains lighted
while the points of all other cooking zones
are turned OFF.
If the activated zone is hot, the display will
alternately readout
and .
2 Press the key and keep it pressed
until the desired power level, ranging
between
and is set.
As an alternative, press the central key .
The choice starts from level (maximum
level) down to (minimum level)
The display shows the preset power level; the
point at the bottom right side remains lighted
for 10 seconds. Adjustment will remain possible
as long as the point is lighted.
Power adjustment of a heated cooking
zone
1 Press the key to activate the cooking
zone to be adjusted, and then release the
key.
The point at the bottom right side will light
up to indicate the activation.
2 Press the key or and keep it pressed until the
desired power level is set.
The display will readout the newly preset
power level; the luminous point at the bottom
right side remains lighted for 10 seconds.
Adjustment will be possible as long as
this point is lighted.
Using your cooktop
or
or
Luminous
point
Luminous
point

17
Fast automatic heating of the cooking zones
This function permits fast heating up at the maximum power level, followed by heating
at the preset power level. The duration of the automatic fast heating up period is preset
and depends on the selected power level (cf. schedule)
The touch control shall be switched ON (cf. section “HOW TO TURN THE TOUCH CONTROL
ON AND OFF”)
1 Press the key to activate the interested
cooking zone; then release the key.
The point on the bottom right side of the
display will light up to indicate activation.
2 Press the key to select the power
level n. ; then release the key.
The display will readout and the point on
the bottom right side will be illuminated.
3 Press the key to activate the fast
heating up function; then release the key.
The display reads out and the point on the
bottom right side is illuminated.
4 Press the key and keep it pressed
until the desired power level ranging
between and is reached.
The display show the preset power level and
the point on the bottom right side is illuminated.
Using your cooktop

18
Cooking zone
power level 1 2 3 4 5 6 7 8 9
Fast
heating time
1
min.
3
min.
5
min.
6.5
min.
8.5
min.
3.5
min.
3.5
min.
4.5
min.
10
sec.
Using your cooktop
After a few seconds, the display reads (automatic)
alternatively with the preset power level.
The cooking zone will operate at its maximum
power for the time indicated in the schedule.
Upon its expiry, on the display will be
switched off and the cooking zone will continue
to function at the preset power level.
Power level modification during automatic fast heating up
It is possible to increase but not to reduce the preset power level during fast heating up.
1 Press the key to activate the interested
cooking zone, then release the key.
The point at the bottom right side of the display
will light up to indicate activation.
2 Press the key until the desired new
power level is reached.
After a few seconds, the display will readout
(automatic) in alternation with the new
power level setting
Interruption of automatic fast heating up
1 Press the key to activate the interested
cooking zone, then release the key.
The point at the bottom right side of the display
will light up to indicate activation.
2 Press the key .
on the display will disappear but the power
level will remain lighted.