Haier LET32T1000HF User manual

DIGITAL LED LCD TELEVISION
INSTRUCTION MANUAL
Model: LET32T1000HF
LET42T1000HF
LET39Z18HF
LET46Z18HF
Please read this manual carefully before operating the unit, and keep it
for future reference.

Contents
EN-1 Digital LED LCD television user's manual
Contents
Safety warnings 2
Welcome............................................................2
Important information.....................................2
About your LED LCD TV 5
Installing the stand .........................................5
Front control panel...........................................7
Rear terminals control .....................................8
Getting to know your remote control.............9
Connecting your TV........................................10
Connecting the aerial ................................................... 10
Improving your signal .................................................. 10
Connecting your PC to the TV ................................... 10
Connecting a DVD player to your TV ...................... 10
Connecting a DVD player or VCR to your TV ........ 10
SCART input ..................................................................... 10
HDMI input ....................................................................... 10
Mounting your TV onto the wall............................... 10
Preparing your remote control......................11
Installing the batteries .................................................11
Caution............................................................................... 11
Getting started 11
Setting up........................................................11
Location............................................................................. 11
Connecting the aerial ................................................... 11
Switching your TV on.................................................... 11
Tuning your TV................................................12
Switching to an external source other than TV ..... 12
Auto Search (Antenna or Cable) ............................... 12
Digital manual search (Cable).................................... 13
Analogue manual search............................................. 13
Skip...................................................................................... 14
Sort ...................................................................................... 14
Edit....................................................................................... 14
Using your TV..................................................15
Selecting a TV channel ................................................. 15
Adjusting the volume................................................... 15
Adjusting the picture settings.......................15
Changing the picture settings................................... 15
Adjusting the sound settings ........................16
Changing the sound settings ........................16
Function settings............................................17
Lock menu settings ........................................18
Shortcut menu display settings ....................20
Using the features 21
Teletext functions...........................................21
Teletext............................................................................... 21
USB mode........................................................22
To use the USB device................................................... 22
Connecting a USB device ............................................ 22
USB media menu............................................................ 22
To display pictures ......................................................... 23
To play music ................................................................... 23
To play movies................................................................. 24
To display text.................................................................. 24
Using an external USB drive for recording ...25
Time Shift .......................................................................... 25
Recording.......................................................................... 25
Reference sections 26
Troubleshooting .............................................26
Specications..................................................27
Appendix.........................................................28

Safety warnings
Digital LED LCD television user's manual EN-2
(Q
Safety warnings
Welcome
Thank-you for buying this 32"/39"/42"/46" Full HD Digital LED LCD TV. This manual will help you to set up and begin
using your TV.
Firstly, check the contents of your box against the parts checklist below:
• 32"/39"/42"/46" Full HD Digital LED LCD TV
• Remote control
• AAA battery ×2
• Instruction manual
• Warranty
• TV stand
• Screws for TV stand
• Component audio adapter
• Cover bottom
Now you can get started!
Important information
READ ALL INSTRUCTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.
WARNING: To avoid the risk of re or electrical hazards, do not place your television in areas with heavy
moisture. Attention should be paid to avoid accidental scratches or impacts on the screen.
Ventilation should not be obstructed by items such as newspaper, table-cloths, curtains etc.
CAUTION: ▲The main plug is used as a disconnection device and must remain readily accessible.
▲Please read this manual carefully before using your television, and keep it in a safe place for
future reference.
▲To ensure the best performance of your television, please read this manual carefully before
using your television, and keep it in a safe place for future reference.
▲Screenshots and images included in this manual may vary due to changes in product
design.
▲Unauthorised disassembly of this product is prohibited.
TruSurround XT, SRS and the symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is
incorporated under licence from SRS Labs, Inc.
TruSurround XT® creates a truly immersive surround-sound experience with rich bass and clear dialogue
from just two speakers.
WARNING: To minimise the risk of re, keep candles or other open ames away from this product at all
times.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
*To avoid electric hazards, it is strongly suggested that the back cover is not opened, as
there are no any accessories inside the casing.
*If necessary, please contact authorised after-sales services.
*Lighting ash mark in a triangle: A potentially hazardous situation, which, if not avoided,
could result in serious injury by high voltage.
*Exclamation mark in a triangle: Major part or accessory of which technical specications
must be followed if it is to be replaced.

Safety warnings
EN-3 Digital LED LCD television user's manual
The product should be tightly fixed to avoid
drop damages and even fire.
To avoid fire hazards, do not use this
product in direct sunlight or close to heat
sources.
Do not place the product close to water or
oil(i.e. cooking oil or lubricating oil), which may
cause fire hazards.
Disconnect the power supply and aerial
during thunderstorms.
Do not use damaged or worn electric plugs, and
keep the electric cord away from heat sources
to avoid electric shocks or fire hazards.
Do not connect excessive sockets in parallel
or use multiple plugs in the same socket.
The product must be placed on a solid and
stable surface to avoid collapse.
Unauthorised disassembly of the television
is prohibited to avoid the risk of electric
shocks or fire. Contact authorised after-
sales service if technical
service is needed.
Keep the product away from a transformer
or heat source to avoid the risk of fire.
If the product is making abnormal sounds,
disconnect the power supply and contact
the authorised after-sales service.

Safety warnings
Digital LED LCD television user's manual EN-4
(Q
Do not use or store inflammable materials
near the product to avoid the risk of
explosion or fire.
To avoid the risk of fire, do not place the
product in a humid area.
The aerial should be kept away from
electric cables to
avoid the risk of
electric shock.
Never touch the plug when your hand is
wet as this may result in electric shock.
Always make sure that the television is
plugged in correctly as a poor electric
connection may cause a fire.
When an aerial is used, measures should be
taken to prevent water from flowing down
the cable into
the television.
To clean, unplug the television and use a
soft, dry cloth. Do not use any chemicals.
Make sure that no
water drops in
the product.
The plug and electric cable must be kept
clean to avoid the risk of electric shock or
fire.
Disconnect the power supply and aerial
during storms
to avoid the risk of
electric shocks
or fire.
Disconnect the power to avoid the risk of
electric shock or fire if the television will be
left for a long period of time.

About your LED LCD TV
EN-5 Digital LED LCD television user's manual
About your LED LCD TV
Installing the stand
For 32-42" LED LCD models only
(Put your TV on the table with the screen facing down.)
1. Put the stand on theTV set
2. Screw the stand in the positions with the screws supplied (4 x B4 x 16).
Screws:4xB4X16

About your LED LCD TV
Digital LED LCD television user's manual EN-6
(Q
Installing the stand
For 39-46" LED LCD models only
(Put your TV on the table with the screen facing down.)
1. Put the rear board on the stand neck and x with the
screws supplied (4 x B4 x 12F).
2. Put the rear board on the back ofTV and x with the
screws supplied (4 x M4 x 14).
Screws:
4xM4X14
Screws: 2xB4X12F Screws: 2xB4X12F
Front Back

About your LED LCD TV
EN-7 Digital LED LCD television user's manual
Front control panel
1INPUT Toggles between all the available input
sources.
2MENU Press to select the main menu.
3CH+ TV channel up.
4CH- TV channel down.
5VOL+ Press to increase the volume.
6VOL- Press to decrease the volume.
7POWER Press to turn theTV on and o.







32" 42" 39" 46"

About your LED LCD TV
Digital LED LCD television user's manual EN-8
(Q
1HDMI1 IN input
2HDMI2 IN input
3HDMI3 IN input
4PC input
5PC
AUDIO input
6SCART
input
7 YPbPr input
8 AV input
9 AERIAL input
10 COAXIAL
11 USB
12 Common interface
13 Earphone output
Rear terminals control
+'0,,1+'0,,1+'0,,13&$8',26&$57
<3E3U9,'(25$8',2/$17,1&2$;,$/86 &20021,17(5)$&(










About your LED LCD TV
EN-9 Digital LED LCD television user's manual
Getting to know your remote control
When using the remote control, point it towards the remote sensor on the TV.
POWER
No function
No function
Picture mode
Sound mode
Display information
Sleep button
DTV Audio/NICAM
Screen button
Channel list
Display or close subtitle
Numerical keys
Source
Q.View
Volume selection
Channel selection
Mute
Menu
Electronic programme guide
Favourite
OK button
Cursor mover button
STAR T RECORD
Exit
USB REPEAT
Teletext index / USB zoom
USB PLAY/PAUSE
USB STOP
Teletext red button / USB fast rewind
Teletext green button / USB fast forward
Teletext yellow button / USB previous le
Teletext blue button / USB next le
Teletext text
Teletext mix
Teletext subcode
Teletext hold
Teletext reveal
Teletext size
No function
REC.LIST
DEFGHI
JKLMNOPQR
STUVWXYZ[\]
5(&25'
$1*/(5(&/,67
Note
RED button, GREEN button, BLUE
button and YELLOW button are
fast text buttons for the analogue
signal. Function button in DVBT
(just reference the OSD)









































About your LED LCD TV
Digital LED LCD television user's manual EN-1010
(Q
Connecting your TV
Connecting the aerial
Connect your aerial into the ANTENNA IN socket at the
back of the TV.
Improving your signal
To improve picture quality in poor signal areas, use a
signal amplifier (not supplied).
Connecting your PC to the TV
You can use your TV as a monitor for your personal
computer using a VGA cable (not supplied).
Consult your computer's user guide to check
whether it has a VGA connector.
Turn the power o on your TV and PC.
Connect a D-type 15-pin VGA interface cable to the
VGA video interface connector on the PC. Connect
the other end of the cable to the PC interface
connector on the TV. Tighten the screws on the
VGA connectors and connect the audio cable (not
supplied) to the audio input socket on the back of
the TV.
Switch on the TV rst, followed by the PC.
Press the button on the TV or TV remote control to
set the video input mode to PC.
If noise is present on the image, change the
resolution, refresh rate, brightness and contrast on
the menu until the picture is clear.
Connecting a DVD player to your TV
Connect the DVD video outputs (Y, Pb, Pr) to the
COMPONENT (Y, Pb, Pr) IN socket on your TV.
Turn on the DVD player and insert a DVD.
Press the SOURCE button to select COMPONENT
mode.
Refer to the DVD player's user guide for operating
instructions.
DVD
Connecting a DVD player or VCR to
your TV
There are two ways to connect a DVD player or VCR to
your TV. Make sure that either the TV and DVD player, or
VCR, are switched o before you connect them.
SCART input
Connect the scart lead from the external device
(DVD player, set-top box or games console) to the TV
scart socket.
Press the SOURCE button to select SCART mode.
Press the PLAY button on the external device.
HDMI input
Connect the cable from the HDMI device to the TV
HDMI socket.
Press the SOURCE button to select HDMI mode.
Refer to the HDMI device's user guide for
instructions.
Mounting your TV onto the wall
You can mount your TV onto the wall using a wall
bracket (not supplied). Use M6 machine screws (4 pcs) to
screw the TV onto the bracket (not supplied).

Getting started
EN-11 Digital LED LCD television user's manual11 Digital LED LCD television user's manualDigital LED LCD television user's manual
Preparing your remote
control
Installing the batteries
Place the remote control face down, then open the
cover of the battery compartment.
Install two AAA batteries. (The + and - symbols on
the battery must match with the symbols on the
remote).
Close the cover of the battery compartment.
Caution
Confirm that there are no objects between the remote
control and the remote sensor on the TV set.
Sunshine or other strong light will interfere with the
signal sent by the remote control. Avoid using near
special uorescent lights or neon signs.
Do not store the remote control in hot or damp places as
this may damage the remote.
Please use two AAA 1.5V batteries. Do not mix battery
types. Install the batteries at the correct polarities. Do
not use rechargeable batteries. If your TV is to be stored
for a period of time, remove the batteries from the
remote control.
Do not discard batteries with common domestic waste.
Do not throw batteries in a re. Ensure batteries are
disposed of in accordance with local regulations.
Getting started
Setting up
Location
You will need to place your TV near your plug socket
(so the power cable can comfortably reach) and within
reach of your aerial socket or extension lead.
Connecting the aerial
Insert the TV aerial lead into the aerial input socket
on the side of the TV.
Insert the batteries into the remote control. Make
sure the batteries have been inserted correctly and
match the polarity indicated inside the battery
compartment.
Switching your TV on
If the indicator light not appears, press the button
on the right of the TV bottom, then the light will
start ashing.
Press POWER on the remote control. The TV will turn
on. After a few moments, the following screen will
be displayed.
Press the OK button on the remote control to enter
the Backlight Mode menu.

Getting started
Digital LED LCD television user's manual EN-1212
(Q
HOME MODE
Press  to select HOME MODE, then press OK to
enter the Language menu.
Press  to select Language, then press OK to enter
the Country menu.
Press  to select Country, then press OK to enter
the Tuner mode menu.
Press  to select Tuner Mode, then OK to enter the
Channel Scan menu.
Press  to select SCAN, then press OK to start auto-
scan. This may take a few minutes to complete.
SHOP MODE
Press  to select SHOP MODE
and press OK to enter the Shop mode menu.
Shop mode will be displayed, but you cannot do
anything except press the EXIT button to exit the screen.
Tuning your TV
Switching to an external source
other than TV
If you have connected a DVD player or similar external
device to the TV, you will need to tell the TV to display
content from it. Simply press SOURCE, which will bring
up the source menu in the left-hand corner of the screen,
and use the and button to highlight the required
source before pressing OK to select it.
For details on how to plug in other equipment see
Connecting your TV on page 10.
Auto Search (Antenna or Cable)
Press the MENU button.
Press  to select Tuning, then press to enter.

Press  button to select Tuner mode (Antenna
or Cable) and Country
Press  button to select you needed.
Press  to select Channel, then press OK to enter.

Press  to select the Channel scan, then press OK
to start searching.


Getting started
EN-13 Digital LED LCD television user's manual13 Digital LED LCD television user's manualDigital LED LCD television user's manual
Press the EXIT button to stop auto search during
searching.
Note
It may take a few moments to complete the auto
search.
Press the Menu button to exit the DTV search, ATV
search will continue.
Digital manual search (Cable)
Press the MENU button.
Press  to select Tuning, then press to enter.
Press  to set Antenna ( Cable ) and Country.
Press  to select the option you require.
Press  to select Channel, then press OK to enter.
Press the number button on the remote control to
set the Frequency (KHz).
Press  to set the Modulation you require.
Press the number button on the remote control to
set the Symbol Rate(Ksym/s).
Press OK to start searching.
Once a channel is located, you can press OK to save
it.
Press the EXIT button to exit.
Analogue manual search
When you need to conduct a manual search, follow the
steps below:
Press MENU, then  to select Tuning and then
press the button to enter.
Press  to set Antenna (Antenna or Cable) and
Country.
Press  to select the option you require.
Press  to select Channels, then press OK to
enter.
Press  to select Analogue Manual Scan, then
press OK to enter.
Press the number button on the remote control to
set Frequency(MHz).
Press  to select Search Up and press OK to
search higher frequency channels.
Select Search Down and press OK to search lower
frequency channels.
Once a channel is located, you can press OK to save
it.
Press the EXIT button to exit.

Getting started
Digital LED LCD television user's manual EN-1414
(Q
Skip
Press the MENU button.
Press  to select Tuning, then OK to enter.
Press  to select Channels, then OK to enter the
sub-menu.
Press  to select Skip. Press to enter the
sub-menu.
Press  to select the channel and then OK to
select the channel to skip.
Sort
Press  to select Sort. Press OK to enter the sub-
menu.
Press  to select the channel you want and then
OK to select the channel.
Press  to select the number position you want to
remove, then press OK to conrm.
You can press the EXIT button to cancel the changes
at anytime.
Edit
Press  to select Edit . Press OK to enter the sub-
menu.
Press OK to enter the menu you need to change the
required option.
Common interface
The common interface (CI) slot is designed to accept the
Conditional Access (CA) Module and Smart card in order
to view the pay TV programmes and additional services.
Contact your Common Interface service provider to get
more information about the modules and subscription.
Please note that we do not supply CA modules, smart
cards or other optional accessories.
Warning
• Switch o your TV before inserting any module into
the Common Interface slot.

Getting started
EN-15 Digital LED LCD television user's manual15 Digital LED LCD television user's manualDigital LED LCD television user's manual
Insert the CAM correctly, then insert the Smart Card
to the CI slot located on the side of the TV.
CI Slot
CAM
Smart Card
When you switch on the TV, a message will be
displayed conrming that the CA module has been
detected. Wait for few moments until the card is
activated.
Press OK to enter, then use the and buttons to
select the option you need and press OK.
Detailed information about the CI card is displayed.
Press OK to access the card menu. Refer to the
module user's manual for information about the
settings.
Using your TV
Selecting a TV channel
Use the channel number buttons: Enter the channel
number with the number keypad on the remote
control.
Use the P+/P- button:
Press the P+/P- button to select a channel number.
Adjusting the volume
Press the V+/V- button on the remote control or at the
bottom of the TV to adjust the volume level.
Adjusting the picture
settings
Changing the picture settings
Press the MENU button, press  to select Picture,
then press OK to enter.
Press  to select the item that needs to be
adjusted.
Press  to adjust the selected item.
When you are satised with your choice, press EXIT
to return to normal viewing or MENU to return to
the previous menu.

Getting started
Digital LED LCD television user's manual EN-1616
(Q
Mode
This will select the picture mode. Select Standard/
User/Vivid/Eco/Cinema/Sport depending on the
channel.
You can quickly select the desired mode using the
P.MODE button on the remote control.
Brightness
This will adjust the amount of light emitted from the
whole picture, which will mainly aect the darker
areas.
Contrast
This will adjust the intensity of bright areas in the
picture, but leave the darker parts unchanged.
Colour
This will adjust the saturation level of colours to suit
your personal preference.
Sharpness
This will adjust the sharpness of details in the picture.
Tint
Allows you to select the colour mix (Tint) of the
picture.
Note
The Tint function is only available in NTSC mode.
Colour temperature
Press to set Colour temperature as User, Cool,
Standard, Warm.
This will increase or decrease Warm (red) standard
and Cool (blue) colours to suit your personal
preferences.
Select Cool to create a blue tint, Standard to for a
neutral tint, and Warm for a red tint.
Advanced video
• DNR
To adjust the level of digital noise: Press  to set
DNR as O, Low, Medium Strong or Auto.
• PEG NR
To adjust the level of MPEG NR: Press  to set
MPEG NR as O, Low, Medium or Strong.
Active Contrast
To adjust the level of luminance of the picture:
Press  to set Active Contrast as On/O.
Adjusting the sound
settings
Changing the sound settings
Press the MENU button.
Press to select Sound, then press OK to enter.
Press  to select the item that needs to be adjusted.
Press  to adjust the selected item.
When you are satised with your choice, press EXIT
to return to normal viewing or MENU to return to the
previous menu.
Sound mode
This sound setting can be adjusted to suit your
personal preferences.
Balance
This will adjust the output of the right and left
speakers to obtain the best stereo reproduction for
your listening position.
Bass
To adjust the lower-pitched sounds.
Treble
To adjust the higher-pitched sounds
Surround
This will control the Woofer output.
Press  to select Surround.
Press  to set Surround as ON or OFF.
Equalizer
This sound setting can be adjusted to suit your
personal preferences.

Getting started
EN-17 Digital LED LCD television user's manual17 Digital LED LCD television user's manualDigital LED LCD television user's manual
SPDIF type
This will control the SPDIF type.
Press button to select SPDIF type.
Press button to set SPDIF type. As OFF, Auto, PCM.
SPDIF delay
This adjusts the sound to make video and audio play
at the same time. This function is active when Digital
Audio Output is set to PCM.
AVL (Automatic volume control)
This adjusts the volume of each channel
automatically to a normal level to ensure the volume
is the same.
Press  to switch AVL AS ON or OFF.
Sound type
Set the sound output type
Type
Press  to set the type as Normal or Visually
Impaired.
Visually Impaired
This function is active when the sound type is set to
Visually Impaired.
• Speaker
Press  to switch the Speaker ON or OFF.
• Volume
This adjusts the volume of Visually Impaired audio.
Function settings
Press the MENU button.
Press to select Function, then press OK to
enter.
Press  to select the item that requires adjusting.
Press  to adjust the selected item.
When you are satisfied with your choice, press EXIT
to return to normal viewing or MENU to return to
the previous menu.
Language
To select the menu language.
Screen mode
To set the picture proportion, press  to select
Auto/16:9/4:3/Zoom1/Zoom2. You can quickly select
the desired mode using the SCREEN button on the
remote control.
• 16:9 mode
Choose 16:9 when you want to adjust the picture
horizontally, in a linear proportion to ll the entire
screen.
• 4:3 mode
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio, with grey bars
appearing on both the left and right sides.
• Zoom1
Choose Zoom1 when you want to view the picture
without any alteration. However, the top and
bottom portions of the picture will be cropped.
• Zoom2
Choose Zoom2 when you want the picture to be
altered, both vertically extended and cropped.
The picture taking a halfway trade o between
alteration and screen coverage.
Blue Screen
This will select the character background colour.
Note
The Blue Screen function is only available in ATV
mode.
Time
• Time zone
Press  button to select the appropriate time
zone

Getting started
Digital LED LCD television user's manual EN-1818
(Q
• Time
Press OK to enter the sub-menu.
Auto Synchronisation: Press  to select ON or
OFF. When Auto mode is on, the time cannot be
adjusted. If OFF is selected, you can set the time
manually.
Date: Press  to select the position and the
number buttons to set the date.
Time: Press  to select the position and the
number buttons to set the time.
On/O time: Press  to select Once, O or Daily. If
you select O, the time cannot be adjusted.
Timer: Press the number buttons to switch on AM and
PM.
• Sleep Timer
Press  to select the number of minutes: O, 10
minutes, 20 minutes, 30 minutes, 40 minutes, 50
minutes, 60 minutes, 90 minutes or 120 minutes.
• Auto Sleep
According to the latest ERP regulations, this unit will
switch itself o automatically if there is no change in
status over a period of 4 hours.
OSD Timer
To set how long you want the menus to appear
on-screen. Each press of the  button selects the
number of preset seconds, the Time will be set in
sequence: 5 sec, 10 sec, 15 sec, 30 sec, 45 sec, 60 sec.
Subtitles
This displays subtitles for the video playing.
•Subtitles
Press  to set Analogue Subtitles as ON or OFF
•Digital Subtitle Language 1.
This adjusts the default digital subtitle language.
•Digital Subtitle Language 2.
This adjusts the second default digital subtitle
language.
•Subtitle type
Press  to set the subtitle type as Normal or
Hearing Impaired.
Teletext
This is used to set the Teletext mode.
• Digital Teletext language
This adjusts the default digital Teletext language.
• Decoding Page Language
This adjusts the decoding page language.
Audio Language
Audio Language 1st
Press  to set the Audio Language.
This is used to select the default audio language for
a digital channel. This function is active for digital
channel.
Audio Language 2nd
This is used to select the second default audio
language for a digital channel. This function is active
for digital channel.
Initial installation
Shop Mode
Press  to select ON/OFF.
Reset default
Recover to the default value.
Lock menu settings
This function can control the tuner, channel, source
volume and so on. Press MENU on the remote control,
then press  to select Lock menu, press to enter.
You will then be required to enter the password. The
initial password is 0000. If you forget your password, you
can always input 9443 to regain control.

Getting started
EN-19 Digital LED LCD television user's manual19 Digital LED LCD television user's manualDigital LED LCD television user's manual
System Lock
Press  to select System Lock.
Press  to set ON or OFF
Channel Block
Press  to select the channel you want to lock.
Parental Lock
Press  to select parental lock. Press  to select
OFF or 4-18 to limit the age of children who will watch
TV.
Clear ALL
Press  to select Clear Lock mode.
Press  to unlock all set modes, which sets all lock
options to o and restores the maximum volume to
100.
Change Password
Press  to select Change Password. Press to
enter the sub-menu.
Enter the new digital password and conrm it,
this password can be changed.
HOTEL SETTING
Press MENU and then press 1,0,0,1,0,8 to enter the
menu:
Hotel Mode:
Turns Hotel Mode ON or OFF.
Max Volume:
Sets the max volume for the TV.
Default Volume:
Sets the default volume for the TV.
OSD Menu Display:
Press  to turn this function ON or OFF.
Keypad Lock:
Forbid TV input sources
Remote Control Lock:
Clears all the locks above.
Remote Control Lock
Source Lock
Default Source
Default Channel
TV Backup to USB
USB Restore to TV