Haier HTN13R12 User manual

..........
11
1111
2121
..........
..........
8

EnglishEnglish
Setup OPTION...........................................................................................6Setup OPTION...........................................................................................6
Setup TIME................................................................................................7Setup TIME................................................................................................7
1
.

35
23
English
EnglishEnglish EnglishEnglish
IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS
20) Read these instructions.
21) Keep these instructions.
22) Heed all warnings.
23) Follow all instructions.
24) Do not use this apparatus near water.
25) Clean only with a dry cloth.
26) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
27) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
28) Do not defeat the safety purposes of the polarized or grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
29) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
30) Only use the attachments/accessories specified by the manufacturer.
20) Read these instructions.
21) Keep these instructions.
22) Heed all warnings.
23) Follow all instructions.
24) Do not use this apparatus near water.
25) Clean only with a dry cloth.
26) Do not block any ventilation openings. Install in accordance with the manufacturer s instructions.
27) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
28) Do not defeat the safety purposes of the polarized or grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
29) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
30) Only use the attachments/accessories specified by the manufacturer.
'
31) Unplug this apparatus during lightning storms or when unused for long periods of time. 31) Unplug this apparatus during lightning storms or when unused for long periods of time.

Thank your for using our Haier product. This easy-to -use manual will
guide you in getting the best use of your TV.
Remember to record the model and serial number. They are on a label
in back of the TV.
Model number
Serial number
Date of purchase
Staple your receipt to your manual. You will need it to obtain warranty service.
Thank your for using our Haier product. This easy-to -use manual will
guide you in getting the best use of your TV.
Remember to record the model and serial number. They are on a label
in back of the TV.
Model number
Serial number
Date of purchase
Staple your receipt to your manual. You will need it to obtain warranty service.
For Future Reference Please
SAVE THESE INSTRUCTIONS
For Future Reference Please
SAVE THESE INSTRUCTIONS
English
Remote Control Functions
1. : Power on/off
2. MENU: Access/Exit Main M
3. CH+/-: Select next higher or lower channel
4. VOL+/-: Increase or decrease sound
5. CHANNEL NUMBER BUTTON: Direct channel
tuning (TV channel 02-69, CATV channel 01-125.)
6. RECALL: Return to previous channel
7. DISPLAY: Display receiving channel
8. TV/AV: TV/AV selection
9. RATING: V-chip Set
10. MUTE: Press key to Activate/deactivate Mute Function
11. P.STD: Select Personal, Vivid, Light, Standard, Soft
12. SLEEP: Sleep timer
1. : Power on/off
2. MENU: Access/Exit Main M
3. CH+/-: Select next higher or lower channel
4. VOL+/-: Increase or decrease sound
5. CHANNEL NUMBER BUTTON: Direct channel
tuning (TV channel 02-69, CATV channel 01-125.)
6. RECALL: Return to previous channel
7. DISPLAY: Display receiving channel
8. TV/AV: TV/AV selection
9. RATING: V-chip Set
10. MUTE: Press key to Activate/deactivate Mute Function
11. P.STD: Select Personal, Vivid, Light, Standard, Soft
12. SLEEP: Sleep timer
1
6
789
23
45
0
REC ALL
TV/ AV
RATIN G
MUT E
P.STD SLE EP
HY F- 23 A
DIS PLAY
MENU CH+
VOL- VOL+
CH-
Features
( ) ( )
Earphone
English
EnglishEnglish EnglishEnglish
5
4
Front
EARPHONE VIDEO IN AUDIO IN
TV/AV MENU - VOLUME + - CHANNEL + Haier
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
12
Back
32) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
32) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
TV/AV
MENU
- VOLUME +
- CHANNEL +
Haier
3 5
4
6
78
9
10
11
1 2
EARPHONE
VIDEO IN
AUDIO IN
13

5
6
PICTUREPICTURE
Brightness 84Brightness 84
Contrast 80Contrast 80
Color 50Color 50
Sharpness 50Sharpness 50
Tint 00Tint 00
CC1 CC2 CC3 CC4 TT1 TT2 TT3 TT4 Off CC1 CC2 CC3 CC4 TT1 TT2 TT3 TT4 Off
Preset
Red
PICTURE parameters:
Press M(MENU) key and select PICTURE.
Press CH- and CH+ to select an item (menu will
roll and show those hidden items with the action
of the CH+ and CH-).
When a certain item is selected, it will be
highlighted red, use VOL+ and VOL- to change
the parameter to your preference.
PICTURE parameters:
Press M(MENU) key and select PICTURE.
Press CH- and CH+ to select an item (menu will
roll and show those hidden items with the action
of the CH+ and CH-).
When a certain item is selected, it will be
highlighted red, use VOL+ and VOL- to change
the parameter to your preference.
1.Presss MENU two times, then enter the
OPTION menu.
2.Select item with CH+ and CH-, the selected
item will highlighted red.
3.Select the language you would like to see
on your screen (English/Francais/Espanol)
with VOL+ and VOL-.
4.Press CH+ and CH- to select C.CAPTION,
the selected item highlighted with red.
When OFF displays, C.CAPTION is set off.
When CC1 displays, C.CAPTION is set active.
Press VOL+ repeatedly , the option will display
followed on the screen in turn:
1.Presss MENU two times, then enter the
OPTION menu.
2.Select item with CH+ and CH-, the selected
item will highlighted red.
3.Select the language you would like to see
on your screen (English/Francais/Espanol)
with VOL+ and VOL-.
4.Press CH+ and CH- to select C.CAPTION,
the selected item highlighted with red.
When OFF displays, C.CAPTION is set off.
When CC1 displays, C.CAPTION is set active.
Press VOL+ repeatedly , the option will display
followed on the screen in turn:
OPTIONOPTION
Language English Language English
C.Caption OffC.Caption Off
Setup PICTURESetup PICTURE
Turning The TV OnTurning The TV On
PICTUREPICTURE
Brightness 84Brightness 84
Contrast 80Contrast 80
Color 50Color 50
Sharpness 50Sharpness 50
Tint 00Tint 00
Getting Started With
Personalized Setup
Getting Started With
Personalized Setup
Setting up this TV can be personalized, please refer to
this manual. It contains instructions to help you. The TV
is preset with default setting preset by manufacturer. To
get personalized setting, please read on.
1. Page 5 a brief introduction to the key functions.
2. Page 6 PICTURE.
3. Page 6 SETUP
4. Page 7 TIME
5. Page 7 PRESET
6. Page 7 V-CHIP
Setting up this TV can be personalized, please refer to
this manual. It contains instructions to help you. The TV
is preset with default setting preset by manufacturer. To
get personalized setting, please read on.
1. Page 5 a brief introduction to the key functions.
2. Page 6 PICTURE.
3. Page 6 SETUP
4. Page 7 TIME
5. Page 7 PRESET
6. Page 7 V-CHIP
red.red.
EnglishEnglish EnglishEnglish
7
Setup TIME Setup TIME
1.Press MENU three times, then enter the CLOCK menu.
2.TIME, selected item will highlight to red;
3.Use VOL+ to adjust minute and use VOL- to adjust hour.
4.Press CH+ and CH- to change the selected parameter
as you wish; Similarly, you can set a Time On/Time
Off/Reminder/Choice;
5.You can also set a time on a channel you want, enter the
channel menu, press VOL+ or VOL- to change the
number of the channel.
1.Press MENU three times, then enter the CLOCK menu.
2.TIME, selected item will highlight to red;
3.Use VOL+ to adjust minute and use VOL- to adjust hour.
4.Press CH+ and CH- to change the selected parameter
as you wish; Similarly, you can set a Time On/Time
Off/Reminder/Choice;
5.You can also set a time on a channel you want, enter the
channel menu, press VOL+ or VOL- to change the
number of the channel.
Setup PRESETSetup PRESET
1.Press the MENU four times, then enter the PRESET menu.
2.Channel: press VOL+ to change the channel you want to
preset.
3.Add/Erase: use CH+ and CH- to select the option, press
VOL+ and VOL- to add or erase TV channels to/from the
program.
4.Antenna: the default parameter is Air, which indicates
the signal receiving method is through the antenna of the
TV. Use VOL+ to change it to CABLE if you are using
cable service.
5.AUTO SEARCH: press the VOL+ or VOL-, it will
automatically search for TV channels. (When
available signal is detected, the channel locked in will
release the lock, press VOL+, and the search resumes).
1.Press the MENU four times, then enter the PRESET menu.
2.Channel: press VOL+ to change the channel you want to
preset.
3.Add/Erase: use CH+ and CH- to select the option, press
VOL+ and VOL- to add or erase TV channels to/from the
program.
4.Antenna: the default parameter is Air, which indicates
the signal receiving method is through the antenna of the
TV. Use VOL+ to change it to CABLE if you are using
cable service.
5.AUTO SEARCH: press the VOL+ or VOL-, it will
automatically search for TV channels. (When
available signal is detected, the channel locked in will
release the lock, press VOL+, and the search resumes).
Setup V-CHIP Setup V-CHIP
Pressing Rating on your remote controller will bring Pressing Rating on your remote controller will bring
V-CHIP to set up display on TV. You will see the V-CHIP to set up display on TV. You will see the
following on your TV screen. following on your TV screen.
This function enables you to block certain TV
channels in according to the V-CHIP requirements
established by the FCC.
Follow the procedure below to set the V-CHIP:
Press the Rating button, you will see the V-CHIP
menu on your TV screen:
1. Press CH+ and CH- to go up and go down the menu.
2. Press VOL+ and VOL- to enter password and then
go into TV Rating and Movie Rating menu.
3. Press VOL+/- to set the Block On and Block Off.
When TV Rating is selected, press VOL+, then you
will find you need enter password, after entering the
default password 0000, you will see the following
rating table on your TV screen.
This function enables you to block certain TV
channels in according to the V-CHIP requirements
established by the FCC.
Follow the procedure below to set the V-CHIP:
Press the Rating button, you will see the V-CHIP
menu on your TV screen:
1. Press CH+ and CH- to go up and go down the menu.
2. Press VOL+ and VOL- to enter password and then
go into TV Rating and Movie Rating menu.
3. Press VOL+/- to set the Block On and Block Off.
When TV Rating is selected, press VOL+, then you
will find you need enter password, after entering the
default password 0000, you will see the following
rating table on your TV screen.
Note: When block On is selected, you will see B
instead of U. When block Off is selected,
you will see U instead of B.
When MPAA Rating is selected, press VOL, then you
will find you need enter password, after entering the
default password 0000, you will see the following
rating table on your TV screen.
Note: When block On is selected, you will see B
instead of U. When block Off is selected,
you will see U instead of B.
When MPAA Rating is selected, press VOL, then you
will find you need enter password, after entering the
default password 0000, you will see the following
rating table on your TV screen.
CLOCKCLOCK
Time 0:00Time 0:00
On Time --:--On Time --:--
Off Time --:--Off Time --:--
Reminder --:--Reminder --:--
Choice --:--Choice --:--
On Channel -On Channel -
PRESETPRESET
Channel 69Channel 69
Add/Erase AddAdd/Erase Add
Antenna AirAntenna Air
Auto SearchAuto Search
V-CHIP
Block Off
TV Rating
MPAA Rating
Change Password
V-CHIP
Block Off
TV Rating
MPAA Rating
Change Password
MPAA Rating MPAA Rating
Movie RatingMovie Rating
G UG U
PG PG UU
PG-13 PG-13 UU
R R UU
NC-17 NC-17 UU
X X UU
Age Based Rating Age Based Rating
Rating FV D L S VRating FV D L S V
TV RatingTV Rating
TV-Y TV-Y UU
TV-Y7 TV-Y7 UU
TV-G TV-G
TV-PG TV-PG UUUUUUUU
TV-14 TV-14 UUUUUUUU
TV-MA TV-MA UUUUUU
Adult languageAdult language
UU
UU
UU
UU
UU
Note: When block On is selected, you will see B
instead of U. When block Off is selected,
you will see U instead of B.
Note: When block On is selected, you will see B
instead of U. When block Off is selected,
you will see U instead of B.
Setup OPTION Setup OPTION

English
9
English
EnglishEnglish EnglishEnglish
8

Espanol
~
10
HTN13R12SHTN13R12S
355X360X310(mm) 355X360X310(mm)
9.2Kg9.2Kg
11
115115
EnglishEnglish
1313
HTN13R12HTN13R12