Haier HVFM102A User manual

Made in China
Fabriqué en Chine
Hecho en China
Haier America
New York, NY 10018
Printed in China
HVFM102A-HVFM122A-2
Issued: May-02
IMPORTANT
Do Not Return This Product To The Store
If you have a problem with this product, please contact the "Haier Customer
Satisfaction Center" at 1-877-337-3639.
DATED PROOF OF PURCHASE REQUIRED FOR WARRANTY SERVICE
IMPORTANT
Ne pas Réexpédier ce Produit au Magasin
Pour tout problème concernant ce produit, veuillez contacter le service des
consommateurs ‘Haier Customer Satisfaction Center’ au 1-877-337-3639.
UNE PREUVE D’ACHAT DATEE EST REQUISE POUR BENEFICIER DE LA GARANTIE.
IMPORTANTE
No regrese este producto a la tienda
Si tiene algún problema con este producto, por favor contacte el "Centro de Servicio al
Consumidor de Haier" al 1-877-337-3639 (Válido solo en E.U.A).
NECESITA UNA PRUEBA DE COMPRA FECHADA PARA EL SERVICIO DE LA GARANTIA
Part # RF-9999-116
®
What The World Comes Home To
TM

Wine Cellar
User Manual-
Guide de l’Utilisateur-
(Les fonctions et la taille peuvent varier selon
le modèle)
Manual del Usuario-
(El tamaño y sus características varían
con el modelo)
Model #’s
Modèle #’s
Para Modelos de #’s
Enfriador de Vino
Rafraîchisseur à Vin
HVFM102A
HVFM122A
(Features and size may vary per model)
®
What The World Comes Home To
TM

SAFETY PRECAUTIONS
Read all of the instructions before using this appliance.
When using this appliance, always exercise basic safety
precautions, including the following:
1) Use this appliance only for its intended purpose as described in this use
and care guide.
2) This wine cellar must be properly installed in accordance with the
installation instructions before it is used. See grounding instructions in the
installation section.
3) Never unplug your wine cellar by pulling on the power cord. Always
grasp the plug firmly and pull straight out from the outlet.
4) Repair or replace immediately, all electric service cords that have become
frayed or otherwise damaged. Do not use a cord that shows cracks or
abrasion damage along its length, the plug or the connector end.
5) Unplug your wine cellar before cleaning or before making any repairs.
Note: If for any reason this product requires service, we strongly
recommend that a certified technician performs the service.
6) If your old wine cellar is not being used, we recommend that you remove
the door and leave the shelves in place. This will reduce the possibility
of danger to children.
7) This wine cellar should not be recessed or built-in an enclosed cabinet. It is
designed for freestanding installation only.
8) Do not operate your wine cellar in the presence of explosive fumes.
9) Do not store foods in wine cellar as interior temperature may not be cool
enough to prevent spoilage.
SAVE THESE INSTRUCTIONS
1
English

2
Thank you for using our Haier
product. This easy-to-use manual will
guide you in getting the best use of
your wine cellar.
Remember to record the model and
serial number. They are on a label in
back of the wine cellar.
Model number
Serial number
Date of purchase
Staple your receipt to your manual. You will need it to obtain
warranty service.
DANGER
Risk of child entrapment. Before you throw away your old
wine cellar, take off the doors. Leave the shelves in place so
that children may not easily climb inside.
English

Table Of Contents
PAGE
Safety Precautions ..........................................................................1
Parts And Features ......................................................................4-5
Installing Your Wine Cellar ............................................................6
Unpacking Your Wine Cellar ..................................................................6
Leveling Your Wine Cellar ......................................................................6
Proper Air Circulation ............................................................................6
Door Handle Installation..........................................................................6
Electrical Requirements............................................................................7
Install Limitations ....................................................................................7
Use of Extension Cords ..........................................................................7
Wine Cellar Features And Use ............................................................8
Initial Set Up ..........................................................................................8
Temperature Adjustment..........................................................................8
Wine Storage ........................................................................................9
Shelving ..............................................................................................10
Interior Light ........................................................................................10
Door Lock............................................................................................10
Normal Operating Sounds....................................................................10
Proper Wine Cellar Care and Cleaning ....................................11
Cleaning and Maintenance ..................................................................11
Power Interruptions ..............................................................................12
Vacation and Moving Care ..................................................................12
Troubleshooting..............................................................................13
Warranty Information ..................................................................14
English
3

Parts And Features
1. Temperature Control Dial
2. Power On Light
3. Door Lock and Key
4. Light On/Off Switch
5. Recessed Handle
6. Adjustable Leveling Legs
(not shown)
7. Bottom Wire Shelf
(1 piece included)
8. Flat Wire Shelves (number of
shelves will vary per model)
(HVFM102A;
6 + 1 additional flat shelf)
(HVFM122A;
7 + 1 additional flat shelf)
9. Interior Light
10. Display Wire Rack
(1 piece included)
English
4
2
431
6
5
7
8
9
10
For bulk storage, remove the
display rack and replace with
additional flat shelf
HVFM102ABB
HVFM122ABB

5
English
Parts And Features
1. Temperature Control Dial
2. Power On Light
3. Door Lock and Key
4. Light On/Off Switch
5. Door Handle
6. Adjustable Leveling Legs
(not shown)
7. Bottom Wire Shelf
(1 piece included)
8. Flat Wire Shelves (number of
shelves will vary per model)
(HVFM102A;
6 + 1 additional flat shelf)
(HVFM122A;
7 + 1 additional flat shelf)
9. Interior Light
10. Display Wire Rack
(1 piece included)
123
4
6
5
7
8
9
10
For bulk storage, remove the
display rack and replace with
additional flat shelf
HVFM102ABL
HVFM122ABL

English
6
1. Remove all packaging material. This includes the foam base and all
adhesive tape holding the wine cellar accessories inside and outside.
2. Inspect and remove any remaining packaging, tape or printed
materials before powering on the wine cellar.
• Your wine cellar has four leveling legs which are located in the front and
rear corners of your wine cellar. After properly placing your wine cellar
in its final position, you can level your wine cellar.
•Leveling legs can be adjusted by turning them clockwise to raise your
wine cellar or by turning them counterclockwise to lower your wine
cellar. The wine cellar door will close easier when the leveling legs are
extended.
• To assure your wine cellar works at the maximum efficiency it was
designed for, you should install it in a location where there is proper air
circulation, plumbing and electrical connections.
•The following are recommended clearances around the wine cellar:
Sides……………2 "(50mm)
Top....................2" (50mm)
Back..................2" (50mm)
•Unpack handle from its original packing. Holding the handle towards
you, align handle bracket holes with holes on the left hand side of the
door frame. Secure the handle to the door with the 4 supplied screws.
Installing Your Wine Cellar
Unpacking Your Wine Cellar
Proper Air Circulation
Leveling Your Wine Cellar
Door Handle Installation (Models: HVFM102ABL & HVFM122ABL)

7
English
Electrical Requirement
•Make sure there is a suitable power Outlet (115 volts, 15 amps outlet)
with proper grounding to power the wine cellar.
• Avoid the use of three plug adapters or cutting off the third grounding in
order to accommodate a two plug outlet. This is a dangerous practice
since it provides no effective grounding for the wine cellar and may
result in shock hazard.
•Do not install your wine cellar in any location not properly insulated or
heated e.g. garage etc. Your wine cellar was not designed to operate in
temperature settings below 55˚ Fahrenheit.
•Select a suitable location for the wine cellar on a hard even surface
away from direct sunlight or heat source e.g. radiators, baseboard
heaters, cooking appliances etc. Any floor unevenness should be
corrected with the leveling legs located on the front and rear bottom
corners of the wine cellar.
• Your wine cellar is designed for free-standing installation only. It is not
designed for built-in application.
• Avoid the use of an extension cord because of potential safety hazards
under certain conditions. If it is necessary to use an extension cord, use
only a 3-wire extension cord that has a 3-blade grounding plug and a
3-slot outlet that will accept the plug. The marked rating of the extension
cord must be equal to or greater than the electrical rating of the
appliance.
Install Limitations
Use of Extension Cords

Mechanical Dial Control: See fig. # 1
• To adjust the temperature locate the temperature control dial. There are
7 settings: 1 being the warmest and 7 being the coolest. You can set the
temperature of your wine cellar at any setting you desire. Your wine
cellar will maintain a temperature between 39˚F - 65˚F depending on
the level of your setting.
Wine Cellar Features And Use
The temperature control is located in the upper left side above the door.
There are 7 settings. Initially set the temperature setting to 3. Let the unit
run for at least 30 minutes to acclimate itself before making any
adjustments.
8
1
2
3 5
6
7
4
65˚ 39˚
fig. # 1
Initial Setup
Temperature Adjustments:
English