Haifuan HFAD6300-R User manual

HAIFUAN
D6300 Series User Manual

Technical Parameters
Product Type
HFAD6300-R, HFAD6300-L , HFAD6300-FR, HFAD6300-F
Dimensions
6.1”*2.55”*4.92”(155*65*125MM)
Material
Zinc Alloy
Weight
4.4LBS (2KG)
Operating Voltage
DC6V，4* 1.5V“AA”Alkaline Batteries
Static Current
≤20µA
Dynamic Current
≤200mA
Ways to open
Password, Mechanical key, M1 Card, Remote control, Fingerprint
User Capacity
Different for each model, check 3.1 for details
Backset
2 3/8”and 2 3/4” both available (60mm or70mm)
Door Thickness
1.2”-2.36”(30mm—60mm)
Part 1: Product Structure Map
1：key hole cover 2：front panel 3：latch 4：fixing screws 5：strike plate 6：plastic strike plate
case 7: back panel 8：fixing screws of back panel 9：batteries(not included) 10：battery cover
11：fixing screw of battery cover
1

Part 2: Installation Instructions
2.1 Drilling holes
1、 Drill holes according to the drilling
template
2、 Drill holes on the door frame to install
strike plate
2.2 Install latch and strike plate
1、 Fix the lock on the door broadside with
two screws
2、 Fix the plastic case and strike plate on
the door frame with two screws
2.3 Install square shaft to front panel
1、 Put the square shaft into square
hole(on the back of front panel)
2、 Fix the square shaft with the pin in
fitting screw bag(make sure it won’t
move)
2.4 Install front panel
1、 Install front panel, pull the connect data
line through the hole
2

2.5 Install back panel
1、Remove battery cover
2、Connect data line of the front and back
panel
3、Fix the back panel with 3 fixing screws.
4、 Make adjustment if necessary, fasten the
screws
2.6 Install batteries
1、Put 4 AA batteries into the battery case
and pay attention to the directions.
2、Close the battery case and fix it with
screws.
3、 Installation finished.
2.7 Test after installation
1、The door can be opened when turn on the
back plate handle.
2、Input initial master code “123456” “#” on
front panel to open it.
2.8 Usage of emergency mechanical key
1、Remove key hole cover with plastic sucker
or magnet
2、Insert the mechanical key, turn 90
degrees.
3、 Turn on the handle, door opened.
3

3 Operation Instruction
3.1 Outline
Admin: code (fingerprint, card or remote control cannot be used as admin)
User: card, code(6-10digits), fingerprint(fingerprint version), remote control(remote control version)
User Capacity: HFAD6300-R, 1 admin code, 100 codes, 800 cards, 120 remote controls
HFAD6300-L, 1 admin code, 100 codes, 800 cards,
HFAD6300-FR, 1 admin code, 100 codes, 150 fingerprints, 120 remote controls
HFAD6300-F, 1 admin code, 100 codes, 150 fingerprints,
3.2 System Initialization
Default admin code is “123456”. You must change the default admin code to add user.
Initialization：

You can press “*” “#”, and then input the admin code to enter to system setting.
3.3 Operations
Press “*” “#” Admin Code “#” to enter the following menu
Set Admin Code
Set User Code:
Set Card user:
Set remote control(For remote control version):
Set fingerprint(For fingerprint version):
(Tips: you can add many users at the same time, for example, when you just added a code user,
you can press the unlock button on remote control to add a remote user, or put a finger on
fingerprint sensor to add a fingerprint, or input anther code to add another code user )
Press RST button for
6 seconds
System initialization, recover to factory state, admin code
back to “123456”
“*”+“#”
Admin Code+#
2
Press the unlock button on remote
controller
“*”+“#”
Admin code+#
1
New Admin Code+#
“*”+“#”
Admin Code+#
2
New User Code+#
“*”+“#”
Admin Code+#
2
put one finger on fingerprint sensor
twice
“*”+“#”
Admin Code+#
2
Put a card close to numbers on keypad
4

Users can change their codes by their own
Delete Single user：
Delete All users：
Passage Mode setting
Verification Mode setting
3.4 Function List(need to enter to system setting first)
Functions
Operation
Description
System
Setting
Passage Mode
setting
0 1 X
x：1-Start，2-Forbid. Default is 2
Verification Mode
setting
0 2 X
x：1-Single user，2-double users ,
Default is 1, if in double mode,
you need to enter two different
codes to open
Admin
Setting
Set Admin Code
1 input Admin Code
and #
Program new master code
Add Users
Add code user
2 input code and #
Add new code users
Add card user
2 put a card close
to number keys
Add new card users
Add remote user
2 press remote
Add new remote users
Add fingerprint
2 put one finger on
finger print sensor
Add new fingerprint users
Delete Users
Delete one User
3 1 U
U stands for Users (input
code/fingerprint/remote/card)
Delete all Users
3 2
Delete all users except Admin
Input code+#(don’t turn handle)
*+5+#
New code+#
Success
“*”+“#”
Admin Code+#
3
Input Code/Fingerprint/
Remote control/Card
“*”+“#”
Admin Code+#
3
1
All user delete successful
2
“*”+“#”
Admin Code+#
0
1-start ，2- forbid
1
“*”+“#”
Admin Code+#
0
1-single user，2-double users
2
5

4 Others
Admin User can set a new Admin code by revision. After the revision, the new Admin will replace the old
one. (the new Admin code will replace the old one)
When entering the Passage Mode, the motor will not lock the door automatically after unlocking by
code/fingerprint, and everyone can unlock the door by turning the handle. Press # to cancel the Passage
Mode.
When inputting the password, please press # for confirmation, and press * for elimination.
This lock has anti-peeking function, with which users can input innocent number before or after the
password, e.g. XXX+password+XXX. (no more than 20 digits.)
Password digits is 6-10digits.
The keypad will be locked for 3 minutes if you continuously input wrong codes for 5times.
Low voltage alarm function： There will alarm to remind to change the batteries upon
unlock the door when the voltage is below 4.8V.After that, the lock can still be unlock 200
time.
5 Video Instruction
Video content
link
1
Installation and programming HFAD6300
https://youtu.be/Cnv17ybYJds
Problem shooting (Customer Service Email: [e-mail])
If you failed to program this lock or you have any other question, please contact customer service email,
we will reply within 24 hours normally.
6