Hailo 1-2-3 500 User manual
Hailo 1-2-3 500 Combi (9459-501)
DE
GB
FR
ES
IT
NL
PT
CZ
PL
RU
TR
GR
UA
Aluminium-Multifunktionsgerüst
Aufbauanleitung
Aluminium multipurpose scaffold
Assembly instructions
Échafaudage alu multifonctions
Instructions de montage
Andamio multifuncional de aluminio
Instrucciones de montaje
Ponteggio polifunzionale in alluminio
Istruzioni per il montaggio
Multifunctionele aluminium steiger
Opbouwinstructies
Andaime multifunções de alumínio
Instruções de montagem
)MJOÈLPWÄWÈDFÕÃFMPWÄMFuFOÈ
/¼WPELNPOU¼yJ
8JFMPGVOLDZKOFSVT[UPXBOJF[BMVNJOJVN
*OTUSVLDKBNPOUBV
Алюминиевая мультифункциональная станина
Инструкция по монтажу
Alu-Multi Fonksiyon-İskele
Kurulum Klavuzu
Σκαλωσιά αλουμινίου πολλαπλών χρήσεων
Οδηγίες συναρμολόγησης
Алюмінієва мультифункційна станина
Інструкція з монтажу
6
Hailo 1-2-3 500 Combi Aluminium multipurpose scaffold (9459-501)
This multipurpose aluminium scaffold is
designed exclusively for domestic use.
Read the assembly instructions carefully
before use and keep them in a safe place.
Dear Customer,
Congratulations on your purchase of the
Hailo 1-2-3 500 Combi Multipurpose Alu-
minium Scaffold. We hope you enjoy using
this versatile and sturdy scaffolding unit.
This multipurpose aluminium scaffold meets
the requirements of the EN 131 1-2-3-4 and
NF E85-200 standards.
Please read these assembly instructions
thoroughly before using the scaffold, paying
particular attention to the safety instructions
on page 30.
Please keep these assembly instructions in a
safe place.
If you have any questions or comments
about our multipurpose aluminium scaffold,
please don’t hesitate to call us.
We’d be delighted to assist.
Hailo-Werk, Rudolf Loh GmbH & Co. KG
Daimlerstraße 8, 35708 Haiger, Germany
+44 1792 701999
Email: info@hailo.de
www.hailo.de
Foreword
Pages 30 / 31
1Pictograms illustrating safety instructions
1. Use as a scaffold
2. Use as a lean-to and double ladder
2Parts overview
Pages 32 / 33
3Pre-assembly
A) Preparing the horizontal and diagonal struts
B) Preparing the guard rails
1. Pre-fit two “Speed Lock” one-handed quick lock systems to
each strut.
2. Tighten the self-locking nuts to ensure that the washer is up
against the threaded bolt.
3. Then check that the quick lock functions properly.
4. Pay attention to the position where it is fitted.
C) Preparing the working platform
Pre-fit 2 sets of hooks to the working platform
(positioned diagonally).
D) Securing the cross pieces
1. Fit the cross piece to ladder section 1.
2. Secure the cross piece with the set of castors to ladder section 2.
)NSTRUCTIONSFORASSEMBLY
7
GB
The scaffold may only be used if it has been properly and fully erected as specified in these assembly instructions
and is set up in a vertical position.
The multipurpose aluminium scaffold must not be used by children.
Always use and store the scaffold out of the reach of children.
The scaffold should be put away or stored in a dry environment either stood upright or laid flat.
Do not expose the scaffold to weather conditions such as rain, ice, snow, etc., for a prolonged period of time
in order to avoid incurring damage.
Problems and solutions:
s /NEORMOREPARTSAREMISSING
s /NEORMOREPARTSHAVENOTBEEN
used when assembly has been
successfully completed.
= Check the assembly instructions
against how the scaffold was
assembled.
If necessary, contact Hailo
(see page 6).
s /NEORMOREPARTSAREDEFECTIVE
or deformed.
= Replace damaged or deformed parts
before assembling.
If necessary, contact Hailo
(see page 6).
Pages 34 / 35
4 Assembling the multipurpose scaffold
E) Assembling the horizontal and platform struts
& Assembling the diagonal struts
1. Insert the “Speed Lock” quick lock system in the cavity inside
the rung.
2. Flip the safety hook down around the upright of the ladder.
3. Secure the “Speed Lock” quick lock system.
G) Securing the working platform
1. Insert the working platform into the rungs and secure with
both sets of hooks (max. 9 rungs from below).
2. Then stand the multipurpose scaffold up.
5Dismantling the scaffold
The multipurpose scaffold is dismantled in the reverse order.
Note: The safety hook, see Figure [X], holds the strut or the
upright in the installation position when the quick lock is
released. Swing the safety hooks away from the upright of
the ladder before removing the guard rails and the horizontal
and diagonal struts.
Pages 36 / 37
6 Technical data / Different ways to assemble the scaffold
30
1
1. 2.
31
2
32
1.
A) B)
2.
3.
4.
12 x 4 x
3
33
1.
2.
C)
D)
D)
2x
2x 2x
34
F)E)
3.2.1.
4
35
G)
[X]
5
36
1,70 m
2,33 m
0,86 m
1,51 m
4,35 m
4,35 m
1,51 m
0,86 m
1,20 m
0,55 m
1,70 m
3,24 m
2,33 m
3,09 m
3
,
20 m
max. 4,20 m
1,64 m
max. 2,85 m
1,70 m
0,86 m
4,10 m
2,07 m
0,86 m
3,80 m
1,81 m
0,86 m
3,55 m
1,55 m
0,86 m
3,30 m
1,30 m
0,77 m
2,80 m
1,67 m
6
37
Other manuals for 1-2-3 500
3
This manual suits for next models
1
Other Hailo Construction Equipment manuals
