HAKO Scrubmaster B30 CL User manual

Hako Scrubmaster B30CL
1. Disconnect mains plug of the charger from outlet and fasten to holder 1.
2. Fill the clear water tank after folding up the opening 2. Control the filling level
by the filling level indication 3.
3. Switch the machine on by the key switch . All aggregates are in standby.
. Use lever 5 to lower squeegee 1 .
5. Use pedal 6 to lower brush head.
6. Adjust driving direction with switch 10 and speed with potentiometer 11.
7. Pull the bail 7of the bailsystem. Brush head drive and suction turbine
switches on.
8. Use switch 9 to adjust the water ( if necessary )
NOTE! Make sure that pad / brush is installed!!!
OPERATION:
Qualified persons only are authorised to operate the machine!
The machine is not designed for coarse material! Floor area sweeping before!
Use only cleaning agents suitable for automatic machines ( low-foaming )!
Please pay attention to the informations in the instruction manua!

Hako Scrubmaster B30CL
Dail maintenance:
Empty clear water tank by opening the
fresh water filter covering 16. Check and
clean filter if required.
Empty soiled water tank 12 by the soiled
water drain hose 13. Clean soiled water tank.
Check and clean tank lid and lid sealing 17.
Check suction filter 15 in the soiled water
tank, clean if required.
Remove suction hose 21 and clean it.
Remove squeegee 1 and clean it.
Remove brush / pad holder 18 by keeping
button 19 pressed and clean brush / pad.
Check brush / pad for wearing.
Charge battery ( take plug from holder 1
and connect with outlet ).
MAINTENANCE AND CARE:
Weekl maintenance:
Check and clean brush head /
sealing strip 18
Clean the machine from outside
Grease locking caps o-ring of soiled water
drain hose
Check squeegee sealing strips and turn or
replace them.
Cleaning result is bad:
osuction filter 15, suction hose 21 or
squeegee 1 is blocked.
oLocking cap of the soiled water drain hose
13 is open
oSoiled water tank is full
oTank lid sealing 17 of the soiled water tank
is defect.
Turn off the machine before maintenance!
Please pay attention to the informations in the instruction
manual, you can find manual by reading QR-code.