Halsey Taylor Contour HCRFER User manual

halseytaylor.com
HALSEY TAYLOR, 2222 Camden Court, Oak Brook, IL 60523
GENERAL
Modular, electric refrigerated, wall-mounted water cooler designed to
be easily accessible to physically challenged individuals. When properly
installed, unit meets state and federal requirements as defined by the
Americans with Disabilities Act for children or adults. Unit is certified to
NSF/ANSI 61 and meets requirements of the Safe Drinking Water Act.
FOUNTAIN
Face-mounted, one-piece, non-corrosive stainless steel cooler top, type
300 series with satin finish, contour-formed basin with softly rounded
corners and edges.
BUBBLER
Exclusive one-piece, chrome-plated two-stream mound-building bubbler
with non-removable anti-squirt feature and integral hood ensures a
satisfying drink of water.
PUSHBUTTON ACTUATION MECHANISM
Self-closing, vandal-resistant pushbutton does not require grasping or
twisting.
AUTOMATIC STREAM HEIGHT REGULATOR
Self-closing assembly is located inside unit to prevent tampering. Unit
resists corrosion and liming. A constant stream height is automatically
maintained under line pressures that vary from 20 to 105 psi.
INLET STRAINER
Easily cleaned in-line strainer screen traps particles of 140 microns or
larger before they enter the waterway.
WATER INLET - 3/8” O.D. Tubing. DRAIN OUTLET - 1-1/4” tube
outlet for 1-1/4” slip joint connection. Trap and service stop not
included.
REFRIGERATION SYSTEM
Hermetically sealed, positive start compressor with lifetime lubrication
and built-in overload protection, efficient capillary sizing, large capacity
dryer-strainer, and self-lubricated fan cools copper/aluminum condenser.
System uses R134A refrigerant. Protected by Halsey Taylor’s Limited 5
Year Warranty.
MOUNTING FRAME
Mounting frame is manufactured of corrosion resistant, galvanized steel.
Open construction designed for ease of installation. Mounting frame can
be shipped in advance for rough-in installation.
WARRANTY
5 year limited warranty on the unit’s refrigeration system. Electrical
components and water system are warranted for 12 months from date of
installation or 18 months from factory shipment, whichever date falls first.
Contour™ Barrier-Free
HCRFER Fountain
with Back Panel
Model HCRFER
PANELS
Constructed of stainless steel, type 300 series with satin finish.
Removable lower panel provides access to plumbing and
refrigeration system. Panels overlap wall opening 1/2”.
SUGGESTED SPECIFICATIONS
Shall deliver 7.5 GPH of 50°F water at 90°F ambient and 80°F
inlet water. Fountain shall include pushbutton valve on front,
contour-formed basin to eliminate splashing and standing
water, and round corners and edges. Bubbler shall be chrome
plated, two-stream, mound-building type. Cooler shall comply
with ANSI 117:1 and ADA for visual and motion disabilites. The
manufacturer shall certify the unit to meet the requirements of
NSF/ANSI 61, and the Safe Drinking Water Act. Unit is UL 399 &
ASHRAE 18 (previously ARI 1010) compliant.
Rated for Indoor Use Only
SPEC00349 01/2016
CAPACITIES CHART
Model Order ID Voltage / Hertz Chilling**
Capacity
F.L.
Amps
Rated
Watts
Approx.
Ship
Wt.
ADA
Compliant
UL399 and
CAN/CSA 22.2
No. 120
Certied
NSF/ANSI
61 and 372
Certied
HCRFER 8633089683 115V / 60Hz 7.5 GPH 5.0 370 84 lbs. • • •
**Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.
NOTE: Continued product improvement makes specication sheets subject to change without notice.
Standard Finish is Stainless Steel
Optional Accessories (extra cost):
• Vandal-Resistant Bubbler Kit (97446C)
• Easy-Flex™ Bubbler Kit (55905C)
• Access Panel (APHT)
• 1500 Gal Filter (HWF172)
Each HCRFER-Q consists of 3 cartons of the following:
• Mounting Frame
• Cooling Unit-SJ8-Q
• Fountain, Panels & Misc. Parts

24"
610mm
CHILD ADA
REQUIREMENT
28 3/8"
721mm
1 1/8"
29mm
11"
279mm
3 1/2"
89mm
4 1/2"
114mm
25 3/16"
640mm
B
C
FINISHED FLOOR
18"
457mm
12"
305mm
MINIMUM DEPTH
BACK WALL LINE
WALL LINE
8 1/8"
206mm
9 3/8"
238mm
1 1/8"
29mm
3 1/8"
80mm
A
19 3/4"
502mm
21 15/16"
557mm
12 1/8"
308mm
3 13/16"
97mm
18 15/16"
481mm
B CA
SIMPLY PUSH IN
TUBE TO ATTACH
TUBE IS SECURED
IN POSITION
PUSH IN COLLET
TO RELEASE TUBE
OPERATION OF QUICK CONNECT FITTINGS
PUSHING TUBE IN BEFORE
PULLING IT OUT HELPS TO
RELEASE TUBE
OPERATION OF QUICK CONNECT FITTINGS
SIMPLY PUSH IN
TUBE TO ATTACH
TUBE IS SECURED
IN POSITION
PUSH IN COLLET
TO RELEASE TUBE
PUSHING TUBE IN BEFORE
PULLING IT OUT HELPS TO
RELEASE TUBE
A B C
1/4” O.D. TUBE
WATER INLET
TO COOLER
3/8” O.D. TUBE CONNECT
COLD WATER SUPPLY
BUILDING WATER
INLET
NOTE: WATERFLOW
DIRECTION
SERVICE STOP
(NOT FURNISHED)
Printed in the U.S.A.
®
Page 2
INCREASE HEIGHT BY 3” (76mm) FOR INSTALLATION OF ADULT ADA COOLER
LEGEND:
A = 3/8” O.D. tube connect (Chiller water inlet) shut off valve by others
B = 1-1/4” O.D. waste tube (elbow & trap not provided)
C = Electrical inlet
Contour™ Barrier-Free
(CONTINUED)
WALL OPENING
IMPORTANT: It is necessary to create a wall opening
18-3/4” W x 37-3/4” H and 4-1/2” above the floor line.
MOUNTING INSTRUCTIONS
Refer to rough-in for location of plumbing and electrical sources. The
support frame is to be installed first. The shelf for the water chiller
should be assembled to the wall frame, and then place chiller into
position. Hang upper fountain panel to hanger on frame. Fountain is
to be attached to panel and wall frame. Water service line, waste line
and electrical is assembled as required. The bottom panel is attached
last, after a final check for leaks and correct functions of fountains and
chiller. (For more details, see the installation instructions.)
Installation requires trap to be installed in wall. Trap and service
stop not included.
OPERATING PRESSURES:
Supply water 20 - 105 psi maximum
ELECTRICAL DATA
Junction box for a (3) wire 10 amp branch circuit. Standard 120 V, 60
Hz, single phase.
Job Name: ____________________________________
Model: _____________________________ Qty. ______
Contact: ______________________________________
Approval Signature: _____________________________
Notes:
FRONT VIEW
SIDE VIEW
TOP VIEW
Rated for Indoor Use Only
HCRFER Fountain
with Back Panel