Halsey Taylor 4540 User manual

97003C (Rev. B - 5/01)
4540-FTN
MODEL 4540 FOUNTAIN
Halsey Taylor Owners Manual
INSTALLATION INSTRUCTIONS
1. This fountain is to be mounted on a smooth, flat, finished wall surface, with adequate support structure.
2. Establish rim height fountain is to be mounted at.
3. Refer to rough-in for plumbing.
4. Locate and install trap (not included).
5. Install shut-off valve (not included) on building water supply.
6. Secure fountain using 1/4" (6mm) lag screws or bolts (not included).
CAUTION: This fountain is rated for inlet water pressure of 20-90 psi. Should the inlet water supply
exceed 90 psi, a pressure reducing regulator should be used.
7. Connect fountain to building supply line by running a water line between the shut-off valve and fountain.
8. Turn on water supply and check all connections for leaks.
9. Adjust bubbler stream height. (See instructions below)
TROUBLE SHOOTING & MAINTENANCE
PROJECTOR: If mineral deposits build up in the orifice, they can be
removed by using a round file or small diameter wire.
CAUTION: Care must be taken not to damage orifice assembly.
STREAM REGULATOR: Stream height is factory set at 45-50 psi.
If supply pressure varies greatly from this, remove the
cap from the bubbler assembly/valve regulator and
adjust the screw on the regulator. Clockwise adjustment
will raise stream height and counterclockwise will lower
stream height. A stream height of 1-1/2" (38mm) is
recommended. (See Fig. 1)
FIG. 1

97003C (Rev. B - 5/01)
FOR PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR CALL 1.800.323.0620
4540-FTN
2222 CAMDEN COURT
OAK BROOK, IL 60523
630.574.3500
PRINTED IN U.S.A.
PARTS LIST 115V
PART NO. DESCRIPTION
51575C
100352940560
100857140740
110346220550
160270508640
160346008640
160346308640
161637308640
170705042830
400755242830
66383C
100322740560
101047442550
160118508640
160316508640
160609216550
45657C
600116618640
600941818640
Ring-Packing
Gasket-Slipnut
Gasket
Locknut
Strainer Plate
Tailpiece 1-1/4" O.D. x 4"
Slipnut 1-1/2"
Drain Plug
Receptor
Fountain Bracket
Supply Line w/Lever Handle
(includes items 12 - 19)
Bubbler Gasket
13/32 Coil S/Breaker
Cap-Bright
Projector
Projector Nipple
Projector Mounting Fitting
Stem Assy w/Lever
3/8 Auto Valve Body w/Reg
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
ITEM NO.
FIG. 2
5
13, 16
12
3
SEE FIG. 2
15
9
10
8
4
6
1
2
7
18
19
11
14