Hama 00176614 User manual

WiFi Outdoor Camera
WiFi-Outdoor-Kamera
E
F
D
GB
Operating Instructions
Bedienungsanleitung
Mode d‘emploi
Instrucciones de uso
Gebruiksaanwijzing
Istruzioni per l‘uso
Instrukcja obsługi
Használati útmutató
Manual de utilizare
Návod k použití
Návod na použitie
Manual de instruções
Bruksanvisning
Руководство по эксплуатации
Работна инструкция
Οδηγίες χρήσης
Kullanma kılavuzu
Käyttöohje
Link to App
de.hama.com/smarthome#smart-solution
NL
PL
RO
CZ
SK
P
S
RUS
BG
GR
TR
FIN
I
H
00176614

1
2
3

6
GOperating Instructions
Important information - Quick-
reference guide:
•This quick-reference guide contains the most
important basic information, such as safety
instructions and the steps necessary to operate
the product.
•The full text of the manual is available at the
following internet address:
www.hama.com -> 00176614 ->
Downloads
•Save the manual on your computer for reference
and print it out if possible.
1. Explanation of symbols used on the
product label
Electrical device of safety
class II.
Protection against electric shock
thanks to reinforced or double
insulation of live parts.
The product must only be used with
alternating current.
Non-dimmable.
The lamp is not suitable for use with
a conventional dimmer.
The article may only be connected by
a qualied electrician who complies
with national regulations and those
of the local energy supply company,
and who has sucient knowledge
regarding installation locations, re
protection and electrical installation
work.
Non-interchangeable
adapter.
1. Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates a risk of electric shock from
touching uninsulated product parts that may carry
hazardous voltage.
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specic hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package contents
• 1 WiFloodlight Camera
• 1 mounting kit
• 1 quick reference guide
3. Safety instructions
• This product is intended for private, non-
commercial use only.
• Use the product only for the intended purpose.
• Do not drop the product and do not expose it to
any major shocks.
• Do not operate the product outside the power
limits given in the specications.
• Do not modify the product in any way. Doing so
voids the warranty.
• Children must not play with the device. Cleaning
and user maintenance must not be carried out by
children without supervision.
• As with all electrical products, this device should
be kept out of the reach of children.
• Dispose of packaging material immediately
in accordance with the locally applicable
regulations.
• The product must only be operated on a supply
network as described on the type plate.
• Before mounting, check that the wall you have
chosen is suitable for the weight to be mounted.
Also make sure that there are no electric, water,
gas or other lines running through the wall at the
mounting site.
• Electrical cables must never become trapped or
twisted between the product and the surface.
• If the product is attached to a metal surface,
it must be connected to an earth lead or the
installation's potential equalising cable.
• Only use the article under moderate climatic
conditions.
• Do not use the product in areas in which
electronic products are not permitted.
• Do not bend or crush the cable.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualied experts.

7
• Do not continue to operate the device if it is
visibly damaged
• No bare spots must be visible after connection
• This product is intended for private, non-
commercial use only.
• Do not use the product in areas in which
electronic products are not permitted.
• Keep the packaging material out of the reach of
children due to the risk of suffocation.
• Do not mount the product above locations where
persons might sit or stand.
• Pay attention to the applicable data protection
regulations before installing and using the
product.
• Respect the personal and property rights of
others. Do not make recordings of other people
with the camera.
• Observe the right to one’s own image and spoken
word when recording.
4. Technical data
Power supply 230 V
Frequency band 2.4 GHz
Maximum radio-
frequency power
transmitted < 100 mW
5. Start-up and operation
Warning
•Please note that lights (even LEDs) can
generate heat and may become hot. Always let
the light cool down for a few minutes before
touching it.
•The device may only be operated on a 230
V 50 Hz AC voltage network. Work on the
230 V network must only be carried out by
an electrician certied in your country. The
applicable accident prevention regulations must
be adhered to.
•To avoid an electric shock from the device,
please disconnect the mains voltage (switch off
the automatic circuit breaker). Failure to comply
with the installation instructions can cause res
or other hazards.
Risk of electric shock
Do not open the product and do not operate it if
it is damaged, if smoke, a strange smell or loud
noises are coming from it. Immediately contact
your dealer or our service department (see item
“Service and Support”).
Note
Replaceable light source by
a professional (LED only).
Warning
Never look straight into the light source and do
not aim its beam of light straight into the eyes of
other people or animals. This could
damage your/their eyes.
Note
This light contains a light source of energy
eciency class "F".
6. Installation
• Switch off the relevant fuse (fuse box) for the
room in which you wish to install the light.
• Check that the wires are de-energised using a
suitable measuring device (e.g. multimeter).
1. Please break through the pre-perforated opening
on the rubber grommet in the plate in order to
thread the cables through as shown in Fig. 2.
2. Attach the plate using the supplied screws and
plugs to the position you have determined on the
wall. (Figure 2)
3. Attach the cables on the product's terminal block.
See Figure 3.
4. Fit the camera to the pre-mounted plate on the
wall. To do this, use the 2 short screws and the
close the holes with the rubber plugs supplied.
5. Switch your fuse back on.