Hamilton Beach 63245 User manual

English...................... 2
Français .................. 13
Español................... 25
Model 63245 for use
with Type SM10 Hamilton Beach
Professional Stand Mixer
Modèle 63245 pour utiliser avec type
SM10 batteur sur socle Hamilton Beach
Professional
Modelo 63245 para usarse
con la batidora de pedestal
Hamilton Beach Professional, tipo SM10
Meat and Food Grinder Accessory
Accessoire de hachoir à viande
et à aliments
Accesorio para moler carne
y alimentos
READ BEFORE USE
LIRE AVANT UTILISATION
LEA ANTES DE USAR
1.800.851.8900
hamiltonbeach.com
For recipes, tips and product
information.
1.800.267.2826
hamiltonbeach.ca
Pour des recettes, des conseils et
des renseignements sur le produit.
800 71 16 100
hamiltonbeach.com.mx
Para recetas, consejos, y información
del producto.
ENTER TO WIN $100
TO SPEND ON WEBSITE
Scan code or visit:
register.hamiltonbeach.com
PARTICIPEZ POUR COURIR LA CHANCE
DE GAGNER UN MONTANT DE 100 $
À DÉPENSER SUR NOTRE SITE WEB
Balayez le code ou visitez le
register.hamiltonbeach.ca
INGRESE PARA TENER LA OPORTUNIDAD
DE GANAR $100 PARA GASTAR EN
NUESTRO SITIO WEB
Escanee el código o visite
register.hamiltonbeach.com
Open to US customers only • Ce concours
s’adresse aux clients des États-Unis seulement
• Este concurso está disponible sólo a clientes
de los Estados Unidos
Le invitamos a leer cuidadosamente este
instructivo antes de usar su aparato.

2
IMPORTANT SAFEGUARDS
1. Read all instructions.
2. This accessory is not intended for use by persons with
reduced physical, sensory, or mental capabilities, or lack of
experience and knowledge, unless they are closely supervised
and instructed concerning use of the appliance by a person
responsible for their safety.
3. This accessory shall not be used by children. Keep the appliance
and its cord out of reach of children.
4. Close supervision is necessary when any appliance is used near
children. Children should be supervised to ensure that they do
not play with the appliance.
5. Turn the appliance OFF ( ), then unplug from outlet when
not in use, before putting on or taking off parts, and before
cleaning. To unplug, grasp the plug and pull from the outlet.
Never pull from the power cord.
6. Do not operate any appliance with a damaged supply cord or
plug, or after the appliance malfunctions or has been dropped
or damaged in any manner. Supply cord replacement and
repairs must be conducted by the manufacturer, its service
agent, or similarly qualified persons in order to avoid a hazard.
Call the provided customer service number for information on
examination, repair, or adjustment.
7. The use of accessories not recommended or sold by the
appliance manufacturer may cause fire, electric shock, or injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter or touch hot
surfaces, including stove.
10. Do not place on or near a hot gas or electric burner, or in
a heated oven.
11. Check that the appliance is OFF ( ) before plugging cord into
wall outlet. To disconnect, turn the control to OFF ( ); then
remove plug from wall outlet. To unplug, grasp the plug and
pull from the outlet. Never pull from the power cord.
12. Do not use appliance for other than intended purpose.
13. Never operate the grinder unattended. Be safe. Disconnect the
grinder from power source before leaving the work area.
14. To reduce the risk of severe personal injury and/or damage
to the grinder, tie back loose hair and clothing, and roll up
long sleeves before operating the grinder. Remove ties, rings,
watches, bracelets, or other jewelry before operating the
grinder.
15. Do not attempt to grind bones or other hard items.
This accessory is intended for household use only. Read the Important Safeguards and user instruction sections included in the Stand
Mixer Use and Care Guide prior to use of this accessory.
When using this accessory, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or
injury to persons, including the following:
SAVE THESE INSTRUCTIONS
1. Never operate grinder accessory without tray attached to
grinder chute and disc assembled in collar.
2. Never use fingers to scrape food away from the grinding plate
while the grinder is in operation. Severe injury may result.
3. Avoid contacting moving parts. Never feed food by hand.
Always use the provided food pusher. Keep fingers clear of
the auger and cutting blades at all times. Never reach into the
grinder. Doing so may cause serious injury.
wWARNING Cut Hazard.

3
Parts and Features Before first use: Wash all removable parts in warm, sudsy water; rinse
and dry. Always unplug mixer from electrical outlet before inserting or
removing accessories.
To order parts:
US: 1.800.851.8900
hamiltonbeach.com
Canada: 1.800.267.2826
Mexico: 800 71 16 100
SAUSAGE-
MAKING PARTS
(stored in Food Pusher)
2
1
7
6
12
13
8
10 9
11
16
15
18
14
3
17
5a
4
1Food Tray
2Food Pusher Lid
3Food Pusher
4Auger Shaft
5Seal Assembly
5a Washer
5b Seal Ring
6Grinding Auger
7Auger Pin
8Blade
9Fine Grinding Plate (3 mm)
10
Medium Grinding Plate (4.5 mm)
11 Coarse Grinding Plate (7 mm)
12 Housing
13 Collar
14 Grinder Chute
15 Sausage Extruder
16 Stuffing Tube
17 Kibbeh Extruder
18 Kibbeh Flange
KIBBEH-MAKING
PARTS
(stored in Food Pusher)
5b

4
Parts and Features (cont.)
Plates Use with Stand Mixer Speed Common Uses
Coarse Grinding Plate (7 mm) Blade 3-5 Raw meats for sausages, burgers, meatballs, chili, kibbeh
Medium Grinding Plate (4.5 mm) Blade 3-4 Meats for sausages, burgers, meatballs, salsa
Fine Grinding Plate (3 mm) Blade 3-4 Parmesan cheese, jams, spreads, fillings
Sausage Extruder Stuffing Tube 3-5 Italian sausage, bratwurst, breakfast links, kielbasa
Kibbeh Extruder Kibbeh Flange 3-4 Kibbeh
Power Hub
Cover
Power Hub
Knob
Lift up cover
Power Hub
Opening
Accessory Power Hub
Insert Accessory
Power Hub
Knob
Tab Opening
Auger Shaft
Tab

5
How to Assemble and Grind
wWARNING
Moving Parts Hazard.
To reduce the risk of personal
injury, always unplug mixer
before inserting or removing
accessories.
NOTE: Make sure no bowl
attachment (such as flat beater,
whisk or dough hook) is installed.
Never operate Stand Mixer with
both Power Hub Accessory and
Bowl Attachment connected.
1. Before inserting Accessory, make
sure Stand Mixer is unplugged
and Stand Mixer Speed Control
Dial is set to OFF ( ).
2. Lift up Power Hub Cover and
let rest on Mixer Head. 3. Turn Power Hub Knob counterclockwise until screw
cannot be seen in Power Hub
Opening.
4. Insert Accessory straight into Power
Hub Opening, aligning Tab on
Accessory with Tab Opening near
Power Hub Knob. Turn Power Hub
Knob clockwise to tighten and hold
Accessory in place.
5. To assemble Seal Assembly, place Washer with raised area
into Seal Ring until parts are flush. With Seal Ring side facing
Auger, slide Seal Assembly onto Auger Shaft. Slide Shaft of
Grinding Auger into Housing with Auger Pin facing out.
6. Place Blade on Auger Pin, aligning square side of Blade with
square on Auger Pin.
7. Place desired Plate on Auger
Pin, aligning notch on Plate
with notch on end of Grinder
Accessory.

6
How to Assemble and Grind (cont.)
8. Add Collar, turning clockwise
until secured in place.
DO NOT over-tighten as
this may make it difficult to
remove after use.
9. Insert Food Tray opening
into top of Grinder Chute.
Place a large bowl under
opening of Grinder
Accessory. Add pieces of
food to Food Tray.
10. Plug Stand Mixer into outlet.
Turn Stand Mixer Speed
Control Dial to desired
setting and use Food Pusher
to slowly move food through
Grinder Chute.
11. Turn Stand Mixer Speed
Control Dial to OFF ( ) and
unplug.
wWARNING Entanglement Hazard. To avoid serious or fatal
injury, never reach into grinder feed chute. Always use food
pusher. Never operate without tray in place.

7
How to Use Sausage Stuffer
1. Before inserting Accessory,
make sure Stand Mixer is
unplugged and Stand Mixer
Speed Control Dial is set to
OFF ( ).
2. Follow Steps 1-5 from “How
to Assemble and Grind.”
3. Add spices and other
ingredients to ground meat.
Mix thoroughly.
4. Place Sausage Extruder on
Auger Pin with notched side
facing in. Hold Stuffing Tube
against Sausage Extruder and
slide Collar over Stuffing Tube.
Turn clockwise until secured in
place.
5. Insert Food Tray opening into
top of Grinder Chute.

8
How to Use Sausage Stuffer (cont.)
10. As casing is being filled, grasp
casing around Stuffing Tube.
If air bubbles form while
filling, use a clean pin to pop
any bubbles.
11. Turn Stand Mixer Speed
Control Dial to OFF ( ).
Remove 3 to 4 inches (7.6 to
10.1 cm) of unfilled casing and
cut. Tie casing into a knot.
12. To make into sausages, pinch
and squeeze casing in middle
of long link. Then using your
hands, twist and turn into
segments or use twine to
form sausages.
6. Make sure Stand Mixer Speed
Control Dial is set to OFF ( )
and plug into electrical outlet.
7. Add ground mixture to Food
Tray, pushing mixture into
Grinder Chute with Food
Pusher to help eliminate air
bubbles.
8. Slide sausage casing over
Stuffing Tube, leaving at least
3 inches (7.6 cm) to tie end
into a knot.
9. Turn Stand Mixer Speed
Control Dial to 3-5. Use
Food Pusher to slowly guide
mixture down Grinder Chute.
wWARNING
Entanglement Hazard.
To avoid serious or fatal
injury, never reach into grinder
feed chute. Always use food
pusher. Never operate without tray
in place.

9
How to Make Kibbeh (a Middle Eastern dish of ground meat and bulgur wheat, with various fillings)
1. Before inserting Accessory,
make sure Stand Mixer is
unplugged and Stand Mixer
Speed Control Dial is set to
OFF ( ).
2. Follow Steps 1-5 from “How
to Assemble and Grind.”
3. Place Kibbeh Extruder on
Auger Pin with notched
side facing in. Hold Kibbeh
Flange against Kibbeh
Extruder and slide Collar
over Flange. Turn clockwise
until secured in place.
4. Insert Food Tray opening
into top of Grinder Chute. 5. Add kibbeh dough to Food Tray. Plug into electrical
outlet.
6. Turn Stand Mixer Speed
Control Dial to 3-4. Using
Food Pusher, feed dough
through Grinder Chute.
7. Cut dough into desired
lengths. Seal one end of
each piece of kibbeh and
fill with desired filling. Seal
other end. Cook according
to your recipe.

10
Care and Cleaning
1. Use a soft bristle brush to clean inside of Food Grinder Housing,
Plates, and Grinding Auger.
2. Wash Grinder parts in hot, soapy water. Rinse and dry. Do not
use bread crumbs to clean out Grinder.
3. Food Pusher with Lid, Stuffing Tube, Kibbeh Flange, Sausage
Extruder, and Kibbeh Extruder are dishwasher-safe in top rack
only.
4. Wipe Stand Mixer with a clean, damp cloth.
Grinding Tips
• Cut meat into 1-inch (2.54 cm) thick strips. Place strips in freezer until very cold or use meat directly from refrigerator for easier grinding.
• Meat will extrude in long ribbons. If meat ribbons start to break during grinding, reduce grinding speed.
• Tough cuts of meat can be ground twice to tenderize. Do not process fatty cuts of meat twice.
• Natural casings need to be soaked in water to reduce salt before stuffing. Follow casing manufacturer’s instructions.
• Do not grind bones or other hard items.
wCAUTION Cut Hazard. The grinding blade and plate can be sharp. Handle with care.
How to Remove Meat and Food Grinder Power Hub Accessory
1. Before removing Accessory, make sure Stand Mixer is unplugged
and Stand Mixer Speed Control Dial is set to OFF ( ) .2. Turn Power Hub Knob counterclockwise to loosen. Pull Accessory straight out. Disassemble to clean.
3. Lower Power Hub Cover and turn Power Hub Knob clockwise to
tighten.