HAMPTON BAY CAPRICE SW19151R MWH User manual

SKU/Model : #XXXX/#SW19151R MWH
#XXXX/#SW19151R MBK
#XXXX/#SW19151R BN
CAPRICE 52
TBA

0.24 15.24 91 2082
0.35 29.95 142 3328
0.47 56.04 190 4645
52 in. xxx xxx
xxx xxx xxx
We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period
of lifetime after the date of purchase by the original purchaser. And we warrant the LED light kit to be free from defects in workmanship
and material present at time of shipment from the factory for a period of 3 years after the date of purchase by the original purchaser.
We also warrant that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the
time of shipment from the factory for a period of one year after the date of purchase by the original purchaser. We agree to correct such
defects without charge or at our option replace with a comparable or superior model if the product is returned. To obtain warranty service,
you must present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are your responsibility.
Damage to any part such as by accident, misuse, improper installation or by affixing any accessories, is not covered by this warranty.
Because of varying climatic conditions this warranty does not cover any changes in brass finish, including rusting, pitting, corroding,
tarnishing or peeling. Brass finishes of this type give their longest useful life when protected from varying weather conditions. A certain
amount of "wobble" is normal and should not be considered a defect. Servicing performed by unauthorized persons shall render the
warranty invalid. There is no other express warranty. We hereby disclaim any and all warranties, including but not limited to those of
merchantability and fitness for a particular purpose to the extent permitted by law. The duration of any implied warranty which cannot be
disclaimed is limited to the time period as specified in the express warranty. Some states do not allow limitation on how long an implied
warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special
damages arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do
not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty
givesd specific legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior
warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.
Ladder

Fiber washer
9+1 spare
9+1 spare
MM
NN
Flywheel screw
Light kit plate screw (preassembled)
LED assembly screw (preassembled)
MM
NN
Remote control holder mounting screw

L
17W LED assembly
M
N
O
P
Q
L
Flywheel
M
N
O
P
Q
Light kit plate
(longer downrod not included)

Attaching the flywheel and downrod to the fan motor assembly
Attach the mounting bracket (B) to the outlet box with
two screws and washers provided with the outlet box.
Make sure the mounting bracket (B) is tightened securely.
FF
II
FF
GG
EE
GG
HH
Loosen the two set screws (II) from the coupling of the fan motor assembly (H).
Tighten the flywheel (I) onto the bottom of the fan motor assembly (H) by using the three flywheel screws (CC).
EE
HH
GG FF II
H
I
KK

OO
OO

M
M
N
N
N
N
M
M
M
M
M

M
M
from the
M
from the
the the
3
DD
DD
DD
K
EB

JJ

AA
H
KK
Insert the blade (A) through the slot on the fan
motor assembly (H).
Attach the fan blade (A) to the fan motor assembly
(H) using the three blade screws (AA) and the three
fiber washers (BB) and tighten them securely.
Repeat this step for the other two blades (A).
Installing the light kit plate to the
fan motor assembly
Remove one of the screws (KK) from the locking
plate of the fan motor assembly (H) and loosen the
other two screws (KK), but do not remove.
Place the key holes
from the light kit plate (J) over
the two screws (KK) previously loosened from the fan
motor assembly (H)
. Turn the light kit plate (J) until
it locks at the narrow section of the key holes. Secure
by tightening the two screws (KK) previously loosened
and the one screw (KK) previously removed.
H
J

10 11
K
PP
Installing the LED assembly to
the light kit plate
Remove one of the screws (LL) from the light kit plate (J)
and loosen the other two screws (LL), but do not remove.
While holding the light kit plate (K) under your fan, firmly
snap the wire connection
plugs (PP) together.
Place the key holes
from the LED assembly (K) over the two
screws (LL) previously loosened from the light kit plate (J).
Turn the LED assembly (K) until it locks at the narrow section
of the key holes. Secure by tightening the two screws (LL)
previously loosened and the one screw (LL) previously
removed.
LL
J
L
J
Installing the glass
Attach the glass (L) to the light kit plate (J) by twisting
tightly. (DO NOT OVERTIGHTEN)

QQ
P
N
PN
Reverse Function
The reverse switch (QQ) is located on the fan motor assembly (H).
down
up

O
MM
O
MM

Check the wires with the molex plugs to ensure proper connection.
Balancing kit included
additional instruction manual within the packet.

Flywheel screw
Light kit plate screw (preassembled)
MM
NN
MM
NN
Remote control holder mounting screw
L
17W LED assembly
M
Flywheel
Q
P
LED assembly screw (preassembled)
N
O
P
Q(longer downrod not included)
Light kit plate
Fiber washer

CF352KR-04
HAMPTON BAY