HAMPTON BAY 1000 000 000 User manual

THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this wall cabinet. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement
needs. Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
CORNER WALL CABINET
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item #1000 000 000
Model #XXXXX

2
Table of Contents
Safety Information ..................................2
Warranty ..........................................2
Pre-Assembly ......................................3
Before You Begin ..................................3
Tools Required ....................................3
Hardware Included.................................3
Package Contents .................................4
Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Care and Cleaning .................................11
Safety Information
Please read and understand these instructions before you begin this
assembly.
CALIFORNIA RESIDENTS
WARNING: This product can expose you to chemicals
including Formaldehyde (GAS), which is [are] known to the
State of California to cause cancer. For more information go
to www.P65Warnings.ca.gov/products.
MINNESOTA RESIDENTS
IMPORTANT HEALTH NOTICE
SOME OF THE BUILDING MATERIALS USED IN THIS HOME (OR THESE
BUILDING MATERIALS) EMIT FORMALDEHYDE. EYE, NOSE, AND
THROAT IRRITATION, HEADACHE, NAUSEA AND A VARIETY OF ASTHMA-
LIKE SYMPTOMS, INCLUDING SHORTNESS OF BREATH, HAVE BEEN
REPORTED AS A RESULT OF FORMALDEHYDE EXPOSURE. ELDERLY
PERSONS AND YOUNG CHILDREN, AS WELL AS ANYONE WITH A
HISTORY OF ASTHMA, ALLERGIES, OR LUNG PROBLEMS, MAY BE AT
GREATER RISK. RESEARCH IS CONTINUING ON THE POSSIBLE LONG-
TERM EFFECTS OF EXPOSURE TO FORMALDEHYDE.
REDUCED VENTILATION MAY ALLOW FORMALDEHYDE AND OTHER
CONTAMINANTS TO ACCUMULATE IN THE INDOOR AIR. HIGH INDOOR
TEMPERATURES AND HUMIDITY RAISE FORMALDEHYDE LEVELS.
WHEN A HOME IS TO BE LOCATED IN AREAS SUBJECT TO EXTREME
SUMMER TEMPERATURES, AN AIR-CONDITIONING SYSTEM CAN BE
USED TO CONTROL INDOOR TEMPERATURE LEVELS. OTHER MEANS OF
CONTROLLED MECHANICAL VENTILATION CAN BE USED TO REDUCE
LEVELS OF FORMALDEHYDE AND OTHER INDOOR AIR CONTAMINANTS.
IF YOU HAVE ANY QUESTIONS REGARDING THE HEALTH EFFECTS
OF FORMALDEHYDE, CONSULT YOUR DOCTOR OR LOCAL HEALTH
DEPARTMENT.
Warranty
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly
BEFORE YOU BEGIN
Compare all parts with the Hardware Included and Package Contents sections. If any part is missing or damaged, do not assemble this
product. Contact Customer Service.
Assemble the cabinet on a soft surface such as carpet or the cardboard container of this product.
TOOLS REQUIRED
Phillips
screwdriver Rubber mallet
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB CC DD
EE FF GG
Part Description Total Quantity Extras*
AA Posts 13 1
BB #8 x 1 in. Screws (yellow) 28 3
CC Corner Locks 6 0
DD Shelf Pins 13 1-5
EE 135-Degree Corner Brackets 4 0
FF #8 x 1/2 in. Screws (yellow) 14 2
GG Silicone Pads 4 2
* Extras quantity is based upon your cabinet size.

4
Pre-Assembly (continued)
PACKAGE CONTENTS
ABC
D
E
Part Description Quantity
A Back Panels with Attached Shims 2
B Side Panels 2
C Face Frame 1
D Top and Bottom Panels 2
E Shelf 2*
* 42 in. Tall pantries have 3 shelves.

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly
1 Attaching the posts to the back
panels
□Locate the two back panels with attached shims (A).
□Align four posts (AA) with corner-most predrilled holes on
each panel (A) and secure with screws (BB).
BB
A
AA
AA
BB
2 Attaching the posts to the side panels
□Locate the two side panels (B).
□Align two posts (AA) with predrilled holes closest to the
grooved edge on each side panel (B) and secure with
screws (BB).
BB
B
AA
AA
BB

6
Assembly (continued)
3 Connecting the back and side panels
□Lay a back panel (A) down with shims facing the oor. Align the other back panel (A) to create a 90-degree corner.
□Secure together using two corner locks (CC). Make sure the at face of the corner locks (CC) faces out.
□Repeat these steps on the other side of the assembly with a side panel (B).
A
A
B
CC A
CC
4 Attaching the top and bottom panels
□Slide the top and bottom panels (D) into the grooves of
the assembly.
D
D

7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
5 Attaching the second side panel
□Align the other side panel (B) and secure to the assembly
using the two remaining corner locks (CC). B
CC
CC
6 Attaching the face frame
□Align the face frame (C) with the sides of the cabinet. Attach face frame (C) using four 135-degree corner brackets (EE) and
twelve 1/2 in. screws (FF).
CEE FF
FF

8
Assembly (continued)
7 Securing the corner locks
□Insert a screw (BB) through the hole in each of the six corner locks (CC), and screw into the top/bottom panels.
BB
CC
8 Securing the panels in place
□Insert seven screws (BB) into the countersunk holes in the back (A) and side panels (B).
B
BB
A
BB
BB

9 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
9 Attaching the silicone pads
□Peel and stick two silicone pads (GG) onto the inside
corners of each door. GG
10 (OPTIONAL) Reversing the door
position
□You can remove and reposition the door to the other side
of the face frame at any time using the pre-drilled holes.
Forpre-drilled holes that are not used, you can cover them
up using a wax pencil or touch-up paint pen.

10
Assembly (continued)
11 (OPTIONAL) Adjusting the door
□Door hinges are 6-way adjustable.
□Up or down adjustment – Loosen screw 1, align the door,
and tighten screw 1.
NOTE: It is critical that you do NOT overtighten screw 1.
□Left or right adjustment – Turn screw 2 clockwise or
counterclockwise.
□In or out adjustment – Turn screw 3 clockwise or
counterclockwise.
1
3
2
1 2 3
12 Installing the shelves
NOTE: Do not install shelves until the cabinet assembly has
been fully installed.
□Tilt one shelf (E) to t inside the face frame and set it on
the bottom inside the cabinet.
E
□Tilt the next shelf (E) to t inside the face frame and place
shelf pins (DD) at the desired locations underneath the
shelf. Lower the shelf to snap over the shelf pins. Install
this shelf at the desired position of the higher shelf.
E
DD