HAMPTON BAY 715.0400.000 User manual

HARPER CREEK SINGLE SOFA
THANK YOU
USE AND CARE GUIDE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item #1003 391 254
Model #715.0400.000
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
lly create

2
Table of Contents
Table of Contents ...................................2
Important Safety Instructions .............................. 2
Warranty ..........................................2
What is covered ...................................2
What is not covered................................2
Pre-Assembly ......................................3
Planning Assembly.................................3
Hardware Included.................................3
Chair package Contents.............................4
Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Care and Cleaning ..................................6
Warranty
2 YEAR WARRANTY
WHAT IS COVERED
We warrant the product to be free of manufacturing defects to the original purchaser for two years.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, freezing, or abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact Customer Care at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
Important Safety Instructions
CAUTION: Read all of the instructions in this manual
before you begin assembly. Failure to do so may result in
faulty assembly and potential injury!
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1. Close supervision is necessary when this furnishing is used by or
near children, or disabled persons, if applicable.
2. Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.

3
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly
PLANNING ASSEMBLY
Please read this entire instruction manual prior to assembly.
Identify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a non-abrasive surface
to avoid scratching.
NOTE: More than one person may be required to assemble
this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA M6x20 Bolt 2
BB 8
CC
DD 10
10
Bolt cap
DDCC EE
EE Allen driver 1
asherW
M6x30 Bolt
AA BB

4
Pre-Assembly
CHAIR PACKAGE CONTENTS
IMPORTANT: Do not fully tighten bolts/screws until all pieces are loosely assembled.
Part Description Quantity
A Chair back 1
B Right arm 1
C Left arm 1
D Chair seat 1
E Seat cushion 1
F Back cushion 1
C
D
F
B
E
A

A
F
E
D
A
A
D
D
C
B
5
Assembly
1 Attaching the chair back to the seat
□Attach the chair back(A) to the seat (D) using M6 bolts
(BB) and washers (CC).
NOTE: Please ensure all the bolts are assembled correctly
and use the allen driver (EE) to tighten. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Adding
.
3
2 Atta
back
ching the left arm to the seat and
□Attach the left arm (C) to the chair seat (D) and back (A) by
using M6 bolts (AA), (BB) and washers (CC).
4
□
NOTE: Please ensure all the bolts are assembled correctly
and use the allen driver (EE) to tighten. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Adding
.
BB
AA
BB
DD
DD
CC
CC
CC
DD
EE
AA
DD
CC
BB DD
CC
Atta
back
ching the right arm to the seat and
□Attach the right arm (B) to the chair seat (D) and back (A) by
using M6 bolts (AA), (BB) and washers (CC).
NOTE: Please ensure all the bolts are assembled correctly
and use the allen driver (EE) to tighten. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Adding
.
Adding cushions
Add seat cushion (E) and back cushion (F) on the chair.